Plastidip vs Decals - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Garret · 07-22-2012, 10:32 PM

I've seen alot of people posting about how they plastidip practically everything, that being said would it be better to plastidip front and rear fascia black outs or get the decals from ridergrapix.com?

p.s cost is not an issue

Thanks

=Stephens= · 07-22-2012, 11:53 PM

Plastidip is nice cuz if you don't like it you can peel it off. But you can peel off a decal too. Personal choice of what they want to do.

Garret · 07-22-2012, 11:55 PM

Your signature picture has the trunk black out is that a decal or a plastidip project?

=Stephens= · 07-23-2012, 12:56 AM

Between the tails is a decal, there is NO plastidip on my car. Decals or painted. My tails are done with VHT blackout spray and my bezels are painted.

Cliffjumper · 07-23-2012, 01:10 AM

I plasti dipped both of mine and everyone thinks its vinyl anyways so at 6$ a can I'd go with that. The vinyl would last longer tho so You pick lol

Dizzy82 · 07-23-2012, 02:56 PM

Plasti-dip is nice because you can experiment with it, if you don't like it, peel it off. Rips and gouges to plasti-dip can also be patched unlike vinyl.

07-22-2012, 10:32 PM	#1
Garret Drives: 2013 2SS/RS Victory Red Join Date: Jul 2012 Location: Bastrop Tx Posts: 443	Plastidip vs Decals I've seen alot of people posting about how they plastidip practically everything, that being said would it be better to plastidip front and rear fascia black outs or get the decals from ridergrapix.com? p.s cost is not an issue Thanks

07-23-2012, 02:56 PM	#6
Dizzy82 Drives: 2011 1LT/RS A6 RJT SuperCharged Join Date: Mar 2011 Location: 87114 Posts: 3,501 View My Garage	Plasti-dip is nice because you can experiment with it, if you don't like it, peel it off. Rips and gouges to plasti-dip can also be patched unlike vinyl. __________________ Power is worthless without control. *The 2nd* protects the 1st.** BMR sub frame brace, BMR tunnel brace, LSR sways, LSR CM ca & tl, Sphon ExD el, GM tower brace, Megan EZ Streets, Goodridge Stainless Steel Braided brake lines, PowerStop D/S rotors & pads, Doug Thorty Ceramic Shorties, Magnaflow x-pipe, MRT V2.0, KICKER PowerStage sub & amp, Infinity speakers & tweeters, Viteese Throttle Controller, Viteese Paddle Shifters, ACS T2 Splitter, ACS T2 Ports/Quad LED lights, VDI kit, Havoc diffuser, IPF ECU/TRANS tuned, IPF/KPE Supercharged. 364RWHP/297RWTQ

07-22-2012, 11:53 PM	#2
=Stephens= Drives: 2011 LS Join Date: Feb 2011 Location: Kearney, Nebraska Posts: 3,544 View My Garage	Plastidip is nice cuz if you don't like it you can peel it off. But you can peel off a decal too. Personal choice of what they want to do.

07-22-2012, 11:55 PM	#3
Garret Drives: 2013 2SS/RS Victory Red Join Date: Jul 2012 Location: Bastrop Tx Posts: 443	Your signature picture has the trunk black out is that a decal or a plastidip project?

07-23-2012, 12:56 AM	#4
=Stephens= Drives: 2011 LS Join Date: Feb 2011 Location: Kearney, Nebraska Posts: 3,544 View My Garage	Between the tails is a decal, there is NO plastidip on my car. Decals or painted. My tails are done with VHT blackout spray and my bezels are painted.

07-23-2012, 01:10 AM	#5
Cliffjumper Drives: 2013 2LT RS Black Join Date: Feb 2012 Location: Dallas Posts: 417	I plasti dipped both of mine and everyone thinks its vinyl anyways so at 6$ a can I'd go with that. The vinyl would last longer tho so You pick lol