![]() |
|
|
#1 |
![]() Drives: 2010 CAMARO RALLY YELLOW SS/RS/M6 Join Date: Aug 2012
Location: Aransas Pass Texas
Posts: 565
|
SCT SF3 CANNED TUNES
Has anyone used the canned tunes in the SF3? or picked them apart to see what they are doing compared to a stock tune.
What are the levels? Can you take out the speed limiter only without a custom tune? Thanks.
__________________
I LIKE TO GO FAST!
Lethal Racing Night Fury Cam Kit, Melling oil pump, C5R Timing Chain, Dyno Tuned by Shawn@Lethal Racing, Vararam Tuned intake, Vararam Power Wedge, LSR Tri Ax Short throw Shifter, VMAX Ported T/B, TSP 2" L/T Headers, TSP Cat delete, Borla axle back exhaust, Innovate A/F monitor, 471.7 HP/438.8 TQ |
|
|
|
|
|
#2 | |
![]() Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,434
|
Quote:
SCT has taken the position not to raise speed limiters, (I heard) I Provide Custom Tuning for any combination via the SCT X3 or SF3 if you already have one. Ted.
__________________
www.jannettyracing.com
Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
|
|
|
|
#3 |
![]() Drives: 2010 CAMARO RALLY YELLOW SS/RS/M6 Join Date: Aug 2012
Location: Aransas Pass Texas
Posts: 565
|
SCT specifically steered me to you Ted so i will be looking for a custom tune for the speed limiter delete and an oprimizing tune for stock with GMPP axle back.
Also an octane tune for use with Torco maybe to 97 0r 100.
__________________
I LIKE TO GO FAST!
Lethal Racing Night Fury Cam Kit, Melling oil pump, C5R Timing Chain, Dyno Tuned by Shawn@Lethal Racing, Vararam Tuned intake, Vararam Power Wedge, LSR Tri Ax Short throw Shifter, VMAX Ported T/B, TSP 2" L/T Headers, TSP Cat delete, Borla axle back exhaust, Innovate A/F monitor, 471.7 HP/438.8 TQ |
|
|
|
|
|
#4 |
|
OCD Solutions
|
TED IS THE BEST! His tune on my 2012 L99 was on the money. Tell him your mods and goals and he will make it happen. Not only was the power gain amazing, I got 2mpg better @ 65. THANKS TED.
__________________
COLOR="Gray"]2012 RS/SS L99 Silver Ice Metallic[/COLOR]
Texas Speed custom cam and Whipple 2.9 Work in progress stay tuned Pfadt Stage 2 kit with ZL-SPEC sway bars and rear arm kit Pfadt Coilovers Pedders Stage 1 bushings / BMR Subframe connectors and tunnel brace American Racing long tubes w/ high flow cats CAI Intake / Rotofab washer bottle / Roto Fab engine covers/JRE race scoop/Forgestar F-16 /Oracle LED side markers, backup lamps and DRL DYI 5 DRL harness / Heritage Grill |
|
|
|
|
|
#5 | |
|
Autoboticus Roboticus
|
Quote:
![]() Ted has been great to work with and the tune has made my car a beast!
__________________
|
|
|
|
|
|
|
#6 |
![]() Drives: 2010 CAMARO RALLY YELLOW SS/RS/M6 Join Date: Aug 2012
Location: Aransas Pass Texas
Posts: 565
|
Anyone using the SCT SF3?
__________________
I LIKE TO GO FAST!
Lethal Racing Night Fury Cam Kit, Melling oil pump, C5R Timing Chain, Dyno Tuned by Shawn@Lethal Racing, Vararam Tuned intake, Vararam Power Wedge, LSR Tri Ax Short throw Shifter, VMAX Ported T/B, TSP 2" L/T Headers, TSP Cat delete, Borla axle back exhaust, Innovate A/F monitor, 471.7 HP/438.8 TQ |
|
|
|
|
|
#7 |
![]() Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,434
|
The ONLY difference between the X3 and SF3 is the SF3 comes with Preloaded SCT tunes for completely stock vehicles.
Functionality is the Same. Ted.
__________________
www.jannettyracing.com
Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
|
|
|
#8 |
![]() Drives: 2010 CAMARO RALLY YELLOW SS/RS/M6 Join Date: Aug 2012
Location: Aransas Pass Texas
Posts: 565
|
Thanks.
__________________
I LIKE TO GO FAST!
Lethal Racing Night Fury Cam Kit, Melling oil pump, C5R Timing Chain, Dyno Tuned by Shawn@Lethal Racing, Vararam Tuned intake, Vararam Power Wedge, LSR Tri Ax Short throw Shifter, VMAX Ported T/B, TSP 2" L/T Headers, TSP Cat delete, Borla axle back exhaust, Innovate A/F monitor, 471.7 HP/438.8 TQ |
|
|
|
|
|
#9 |
![]() Drives: Synergy green SS Join Date: Nov 2012
Location: NE Indiana
Posts: 79
|
So is the speed limiter delite a standard for a JRE tune?
|
|
|
|
|
|
#10 |
![]() Drives: 2010 CAMARO RALLY YELLOW SS/RS/M6 Join Date: Aug 2012
Location: Aransas Pass Texas
Posts: 565
|
I would like to know this as well
This is a good question.
I just recently purchased the SF3 with the canned tunes hoping that i could tune out the speed limiter or at least adjust it up as the literature says. I wont be at home to try it out until Friday(gone from work 3 weeks at a time for work). Eventually i plan to get Ted Janetty to build the 4 tunes i want, but for my experiment, I just need the speed limiter increased and all else left stock. And i don't want to pay 150.00 just to remove the speed limiter. If i have to pay$150.00 to have just that removed, So be it... i don't have to like it.Pay to play i guess. The only reason i got the SF3 was for that. Either way, if no one speaks up, i will hnow by friday if it does and i'll post up. ![]() Dave
__________________
I LIKE TO GO FAST!
Lethal Racing Night Fury Cam Kit, Melling oil pump, C5R Timing Chain, Dyno Tuned by Shawn@Lethal Racing, Vararam Tuned intake, Vararam Power Wedge, LSR Tri Ax Short throw Shifter, VMAX Ported T/B, TSP 2" L/T Headers, TSP Cat delete, Borla axle back exhaust, Innovate A/F monitor, 471.7 HP/438.8 TQ |
|
|
|
|
|
#11 | |
![]() Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,434
|
Quote:
You will never need 4 tunes and the tune can only store 3 custom tunes. Custom tuning is billed at 200.00 per hour so decide what you want up front so I only have to do the tune once. Ted.
__________________
www.jannettyracing.com
Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
|
|
|
|
|
|
![]() |
| Thread Tools | |
|
|