You are browsing camaro5 
 |
|
09-18-2013, 03:57 PM
|
#1 |
         
Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
What are your tunes setting redline at?
What are your tunes setting redline at? Is there any power to be had a little higher in the rpm range with stock springs?
|
|
|
|
09-18-2013, 05:49 PM
|
#2 |
Drives: 2013 ZL1 Join Date: Oct 2011
Location: tangent or
Posts: 2,985
|
I think I am at 6500 or 6600. no issues yet. 7k on the clock.
I like the power band better with more RPM.
__________________
2016 2SS
2020 super duty on 37's |
|
|
|
|
09-18-2013, 06:14 PM
|
#3 |
|
Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
Cool. I'm sure there is some sustained power left on the table a little past 6000.
|
|
|
|
|
09-18-2013, 06:48 PM
|
#4 |
|
ANGRY Z
Drives: 2015 Camaro ZL1 Join Date: May 2012
Location: Alberta, Canada
Posts: 1,406
|
6800rpm but I set my shift light for 6600rpm. I like this setting, I never bounce off the rev limiter this way
|
|
|
|
|
09-18-2013, 06:58 PM
|
#5 |
|
Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
6800 with stock springs?
|
|
|
|
|
09-18-2013, 07:45 PM
|
#6 |
|
ANGRY Z
Drives: 2015 Camaro ZL1 Join Date: May 2012
Location: Alberta, Canada
Posts: 1,406
|
No. Comp cams dual valve springs with titanium locks
|
|
|
|
|
09-18-2013, 08:52 PM
|
#7 |
|
Catfish
Drives: 2012 Camaro ZL1 #361 Join Date: Nov 2011
Location: North Carolina
Posts: 60
|
6700 w/ stock springs
__________________
2012 ZL1 VIN# : 361
 DELIVERED ON 4-12-12 Victory Red, Alum Wheels, Manual, Carbon Fiber Mohawk Performance Mods to Date: Rotofab cold air intake, Kooks 1 7/8" LT headers w/ Calico KoolBlack ceramic coating, Kooks high flow cats, Corsa 3" X-pipe cat-back exhaust, 160 degree thermostat, 2.50" Supercharger Pulley, PCM Catch Can, Rotofab Supercharger Reservoir, 1000cc Injectors, MSD Boost-a-Pump,Tuned by PCM of NC 604 RWHP & 622 RWT !! Also, 2001 Silverado Z71, Pewter w/ Extended Cab & 2013 Chevy Cruise LTZ/RS White |
|
|
|
|
09-18-2013, 09:02 PM
|
#8 | |
|
Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
Quote:
|
|
|
|
|
|
09-18-2013, 09:31 PM
|
#9 | |
 Drives: Camaro's, always have, always will. Join Date: Oct 2010
Location: Home of the brave
Posts: 4,851
|
Quote:
__________________
In Scott We Trust...all others must show proof.
|
|
|
|
|
|
09-18-2013, 09:36 PM
|
#10 |
|
Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
I want to take it a little higher. 6400 or so. But not any higher.
|
|
|
|
|
09-18-2013, 10:10 PM
|
#11 | |
|
ANGRY Z
Drives: 2015 Camaro ZL1 Join Date: May 2012
Location: Alberta, Canada
Posts: 1,406
|
Quote:
|
|
|
|
|
|
09-18-2013, 10:18 PM
|
#12 |
Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010
Location: Alberta
Posts: 1,409
|
I'm shifting at 5700ish. Seems a bit low but it goes.
|
|
|
|
|
09-18-2013, 11:33 PM
|
#13 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,326
|
Well my car is an auto and it shifts with all the nannies off at 6000. With them on at 5800. I must need a tune or something. I have always thought it could go a little further. If I paddle shift it 6 grand is the limit cause it hits the rev limiter at 6100.
|
|
|
|
|
09-19-2013, 12:03 AM
|
#14 | |
Drives: 2013 ZL1 Join Date: Oct 2012
Location: Dubai
Posts: 757
|
Quote:
__________________
 1150bhp Whipple 4.0 Supercharged 427ci Camaro ZL1 |
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
