(FS) Rideskinz Aggressor V2 Bumper - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SlyJester7 · 01-06-2014, 05:11 PM

I am selling my Aggressor V2 Bumper. DO NOT get this confused with the V1 Bumper.

This bumper did take some work and adjustment (since not all aftermarket parts fit 100% perfect). The hard part is already done since its been installed on my car (see picture below).

I really dont want to get rid of this bumper because I think it is the meanest looking bumper around but with my car being lowered 1 1/2" its not realistic for me. This bumper would be perfect for someone who is not planning on lowering thier car or for a show car.

*Not willing to ship*

Comes with:
Bumper
Lights (with wireing)
ABS Mesh
Top bumper modling with # Plack (See Pic, not sure what to call it)

The bumper can be repainted but would be ideal for a Summit White camaro. Minor scratch on lower splitter at the center from a driveway (See picture). My idea was to sand it and wrap the buttom lip in gloss black vinyl. . . Also, some of the corners of the ABS mesh need to re re-installed. They came off when it was being uninstalled.

For Sale for: $1000 OBO <Please no low ballers, im already taking a huge hit.

tekteq · 01-06-2014, 08:11 PM

I'd take this in a heartbeat but I'm low on the dough, bump:P

MikeSVX · 01-07-2014, 10:24 AM

Quote:

Originally Posted by tekteq

I'd take this in a heartbeat but I'm low on the dough, bump:P

I guessing it wouldn't fit a 2014. Aren't the hood and gill openings different sizes?

SlyJester7 · 01-07-2014, 12:25 PM

Quote:

Originally Posted by tekteq

I'd take this in a heartbeat but I'm low on the dough, bump:P

Im in no rush to sell. . .

Quote:

Originally Posted by MikeSVX

I guessing it wouldn't fit a 2014. Aren't the hood and gill openings different sizes?

I believe (dont quote me) I read a thread saying that it would take work / re wiring to adapt but was possible.

tekteq · 01-07-2014, 02:48 PM

Quote:

Originally Posted by MikeSVX

I guessing it wouldn't fit a 2014. Aren't the hood and gill openings different sizes?

Good question, hope that doesn't shatter my zl1 conversion hopes lol

STuRTzz · 01-07-2014, 03:42 PM

You would have to adjust the cowl lines are the ones on the 2014 are wider.

SlyJester7 · 01-09-2014, 12:04 PM

SlyJester7 · 01-13-2014, 01:01 PM

All PMs replied

SlyJester7 · 01-14-2014, 02:00 PM

Deposit received

Thank you all for your interest. Will advise if things change . .

leonardo · 01-14-2014, 05:10 PM

Quote:

Originally Posted by SlyJester7

Deposit received

Thank you all for your interest. Will advise if things change . .

01-06-2014, 05:11 PM	#1
SlyJester7 SoCal HT5 COTW 8/26/13 Drives: 2013 SS/RS LS3 Join Date: Nov 2009 Location: So Cal Posts: 1,054 View My Garage	(FS) Rideskinz Aggressor V2 Bumper I am selling my Aggressor V2 Bumper. DO NOT get this confused with the V1 Bumper. This bumper did take some work and adjustment (since not all aftermarket parts fit 100% perfect). The hard part is already done since its been installed on my car (see picture below). I really dont want to get rid of this bumper because I think it is the meanest looking bumper around but with my car being lowered 1 1/2" its not realistic for me. This bumper would be perfect for someone who is not planning on lowering thier car or for a show car. *Not willing to ship* Comes with: Bumper Lights (with wireing) ABS Mesh Top bumper modling with # Plack (See Pic, not sure what to call it) The bumper can be repainted but would be ideal for a Summit White camaro. Minor scratch on lower splitter at the center from a driveway (See picture). My idea was to sand it and wrap the buttom lip in gloss black vinyl. . . Also, some of the corners of the ABS mesh need to re re-installed. They came off when it was being uninstalled. For Sale for: $1000 OBO <Please no low ballers, im already taking a huge hit. Attached Images __________________

01-09-2014, 12:04 PM	#7
SlyJester7 SoCal HT5 COTW 8/26/13 Drives: 2013 SS/RS LS3 Join Date: Nov 2009 Location: So Cal Posts: 1,054 View My Garage	__________________

01-13-2014, 01:01 PM	#8
SlyJester7 SoCal HT5 COTW 8/26/13 Drives: 2013 SS/RS LS3 Join Date: Nov 2009 Location: So Cal Posts: 1,054 View My Garage	All PMs replied __________________

01-14-2014, 02:00 PM	#9
SlyJester7 SoCal HT5 COTW 8/26/13 Drives: 2013 SS/RS LS3 Join Date: Nov 2009 Location: So Cal Posts: 1,054 View My Garage	Deposit received Thank you all for your interest. Will advise if things change . . __________________

01-06-2014, 08:11 PM	#2
tekteq HT5 in the 626 Drives: 2014 Camaro 2SS/RS Join Date: Nov 2013 Location: 626, California Posts: 757	I'd take this in a heartbeat but I'm low on the dough, bump:P

01-07-2014, 03:42 PM	#6
STuRTzz Drives: '12 Summit White 2ls W/Black Stripe Join Date: Apr 2012 Location: Orange County, CA Posts: 670	You would have to adjust the cowl lines are the ones on the 2014 are wider.