09-27-2016, 07:36 AM | #1 | |
Drives: Camaro Join Date: Jan 2016
Location: Utah
Posts: 31
|
KPE Supercharger Released for the LFX
KPE Supercharger for the LFX Camaro-Released! The moment you all have been waiting for….the KPE Supercharger for the 2012-2015 LFX Camaro is now ready for production. With Derek’s help and a few other fine folks, we now are ready to begin producing the new and improved supercharger kit. Gone are the days of old KPE or IPF, lack of support, lack of parts, or lack of knowledge. The new KPE is here. The new system is here. The bone stock kit with all hard piping, 31x12x3” intercooler, and Vortech V3SCi supercharger, and partnered with Overkill Motorsport tuning, is putting out 400+ RWHP, and 330ft/lbs of torque, up approximately 30hp and 30ft/lbs from the original kit. Key improvements are the new all hard-piping, new power steering fitting and hose routing, larger, more robust idler pulleys with longer lasting bearings, a conventional blow off valve system, larger intercooler, and a quality catch can system with clean side separator. A sound byte from Derek’s car- New Idler Pulleys: The Vortech: Hard Piping: Tuned with the base intercooler*: Tuned with the optional intercooler*: Tuning is now done by Overkill Motorsports. Hand held tuner included that will allow you to datalog your car and send files over for retunes. Make changes, upgrades, gear changes, send that information over, and get a retune, for YOUR car. Now go be that guy or girl at the track that constantly gets asked “is that a V8?” And you can answer with: V8 power (or more!) without the insurance costs, or fuel costs. Why not? Be a part of the KPE Team, and reach out to be a part of the new KPE. FIRST 15 people to email support@kpe-products.com will be eligible for more savings or options Upgrade kits and parts (Intercooler, piping, blow off valve, power steering, idler pulleys, etc) will be available separately. Kits will be shipping in 4-6 weeks. Pricing starts at $6995, with upgrade options available. Thank you, and welcome to the new KPE Performance team! |
|
09-27-2016, 11:36 AM | #2 |
Drives: 2011 1LT/RS A6 RJT SuperCharged Join Date: Mar 2011
Location: 87114
Posts: 3,502
|
Any option for us stuck with the obsolete kit?
__________________
Power is worthless without control. The 2nd protects the 1st.
BMR sub frame brace, BMR tunnel brace, LSR sways, LSR CM ca & tl, Sphon ExD el, GM tower brace, Megan EZ Streets, Goodridge Stainless Steel Braided brake lines, PowerStop D/S rotors & pads, Doug Thorty Ceramic Shorties, Magnaflow x-pipe, MRT V2.0, KICKER PowerStage sub & amp, Infinity speakers & tweeters, Viteese Throttle Controller, Viteese Paddle Shifters, ACS T2 Splitter, ACS T2 Ports/Quad LED lights, VDI kit, Havoc diffuser, IPF ECU/TRANS tuned, IPF/KPE Supercharged. 364RWHP/297RWTQ |
09-27-2016, 02:53 PM | #3 |
Drives: Camaro Join Date: Jan 2016
Location: Utah
Posts: 31
|
Yes! We should have pricing to release for the 2 needed upgrade kits. The first is the crankcase evacuation and catchcan system, and the next is the charge pipe and intake pipe kit. This will allow you to convert your old system to the new one with all the benefits. If you have the updated ceramic bearings in your original idler pulley's you may be fine with those, otherwise we have a new pulley set as well. Stay tuned and we will release those as soon as were able! And as a bonus, you should see 3-5 MPG improvement in fuel economy on the highway. Now one more bonus, the first LLT, LFX, and LGX (2010-2011 LLT with low mileage or has had recent timing chain replaced, LFX 2012-2015, or LGX 2016-2017) to order now, we will do the installation start to finish free. Tuned, ported throttle body, and some added extra appearance mods under the hood. You just have to get the car to us and afterwards of course promote KPE at shows, meets, etc. We want one of each done start to finish by us. PM for details! |
09-27-2016, 04:15 PM | #4 | |
Drives: 2011 1LT/RS A6 RJT SuperCharged Join Date: Mar 2011
Location: 87114
Posts: 3,502
|
Quote:
__________________
Power is worthless without control. The 2nd protects the 1st.
BMR sub frame brace, BMR tunnel brace, LSR sways, LSR CM ca & tl, Sphon ExD el, GM tower brace, Megan EZ Streets, Goodridge Stainless Steel Braided brake lines, PowerStop D/S rotors & pads, Doug Thorty Ceramic Shorties, Magnaflow x-pipe, MRT V2.0, KICKER PowerStage sub & amp, Infinity speakers & tweeters, Viteese Throttle Controller, Viteese Paddle Shifters, ACS T2 Splitter, ACS T2 Ports/Quad LED lights, VDI kit, Havoc diffuser, IPF ECU/TRANS tuned, IPF/KPE Supercharged. 364RWHP/297RWTQ |
|
09-27-2016, 06:07 PM | #5 | |
Quote:
__________________
"Suzie Blue" 2010 2LT ABM #3768 BBK LT's No Cats, ARK DTS, 80MM OvK, LFX Mani mod, ZL1 Pump, 1LE 3.91
|
||
09-27-2016, 07:30 PM | #6 |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,631
|
Respectable numbers.
I remember looking at the original kit when I had my V6. This one sounds like a winner. Congrats.
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
09-27-2016, 07:45 PM | #7 |
Drives: 2015 1LS Red V6 Join Date: Aug 2015
Location: St Joseph, MO
Posts: 1,849
|
It has certainly surprised a few people :-)
And will do at the track as well Sent from my iPhone using Tapatalk
__________________
Sponsors:
Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group |
09-28-2016, 10:11 AM | #8 | |
|
Quote:
__________________
2017 ZL1 A10 2017 2SS M6: (SOLD) || 2014 2LT Convertible: (SOLD) || 2010 2LT M6 Supercharged:(SOLD) || 1987 IROC-Z 5.0 M5: (SOLD) |
|
09-28-2016, 10:12 AM | #9 |
Drives: 2015 1LS Red V6 Join Date: Aug 2015
Location: St Joseph, MO
Posts: 1,849
|
It will include its own tuning module that you can datalog and read your car, and flash tunes with.
__________________
Sponsors:
Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group |
09-28-2016, 10:27 AM | #10 |
|
Perfect, thanks again Derek.
__________________
2017 ZL1 A10 2017 2SS M6: (SOLD) || 2014 2LT Convertible: (SOLD) || 2010 2LT M6 Supercharged:(SOLD) || 1987 IROC-Z 5.0 M5: (SOLD) |
09-30-2016, 06:54 AM | #11 |
Drives: Camaro Join Date: Jan 2016
Location: Utah
Posts: 31
|
We should have pricing available for the fully updated/upgraded kit with the larger intercooler and different BOV available today, as well as working on an upgrade kit for those with the original IPF kit!
More to be released soon! |
10-01-2016, 02:24 PM | #12 |
Drives: 2013 convertible Hot Wheels Join Date: Sep 2016
Location: Clute, TX
Posts: 46
|
I live in rain and water on the road country and am not comfortable with the low mounted intakes. Is there a higher mount option, even if some home brewing is required? The area where you'd normally have a CAI is full of supercharger?
|
10-01-2016, 03:34 PM | #13 |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,220
|
|
10-01-2016, 04:18 PM | #14 |
Havent had an issue with water in 8 months that I have owned the kit. Use the air filter wrap, avoid going into boost in heavy water , slow down in deep puddles.
|
|
|
|
Thread Tools | |
|
|