Lfp heat exchanger - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hou30guy · 02-22-2018, 08:54 PM

I did a lfp dual pass exchanger 389 and orders a dual fan kit from amazon 60 bucks. Just from hpt logging my tempss dropped 40 degree on pulls back to back, i love it. I didnt mount it in the normal spot it normally goes up high. Instead i did it down low and let it rest on the fame support and the brackets sit in between the bumper support

Sent from my SM-N950U using Tapatalk

davidscamaro · 02-23-2018, 12:44 PM

What supercharger do you have and how much boost?

40 degree drop is quite good!!

hou30guy · 02-23-2018, 12:46 PM

Maggie tvs 2300 at 20 psi, i also swapped the iat sensor for a lsa gm sensor too so the reading is accurate and fast

Sent from my SM-N950U using Tapatalk

hou30guy · 02-23-2018, 12:50 PM

408 stroker 10.1 compression, maggie jackshaft tvs 2300, rear od cog,front 2.9 sc pulley, btr pds stage 3 blower cam, nw 102mm tb,ls3 ported heads on a 6.0 bored .035 over iron block,1400cc injectors, fore dual pumps with flex sensor, ati od balancer 6%,circle d 3200 stall,18s drag pack,im sure im missing more

Sent from my SM-N950U using Tapatalk

davidscamaro · 02-24-2018, 10:59 AM

Is that what exchanger the one listed for 07+ gt500?

hou30guy · 02-24-2018, 01:19 PM

No the one for the zl1 camaro

Sent from my SM-N950U using Tapatalk

02-22-2018, 08:54 PM	#1
hou30guy Drives: 2011 convertible 2ss/rs Join Date: Sep 2015 Location: Houston Posts: 971	Lfp heat exchanger I did a lfp dual pass exchanger 389 and orders a dual fan kit from amazon 60 bucks. Just from hpt logging my tempss dropped 40 degree on pulls back to back, i love it. I didnt mount it in the normal spot it normally goes up high. Instead i did it down low and let it rest on the fame support and the brackets sit in between the bumper support Sent from my SM-N950U using Tapatalk

02-23-2018, 12:44 PM	#2
davidscamaro Drives: 2010 SS/RS M6 BIG cam Join Date: Mar 2016 Location: McDonald's DT Posts: 856	What supercharger do you have and how much boost? 40 degree drop is quite good!! __________________ BIG cam ...... 305 45 18 Mickys ...... BMR suspensions

02-24-2018, 10:59 AM	#5
davidscamaro Drives: 2010 SS/RS M6 BIG cam Join Date: Mar 2016 Location: McDonald's DT Posts: 856	Is that what exchanger the one listed for 07+ gt500? __________________ BIG cam ...... 305 45 18 Mickys ...... BMR suspensions

02-23-2018, 12:46 PM	#3
hou30guy Drives: 2011 convertible 2ss/rs Join Date: Sep 2015 Location: Houston Posts: 971	Maggie tvs 2300 at 20 psi, i also swapped the iat sensor for a lsa gm sensor too so the reading is accurate and fast Sent from my SM-N950U using Tapatalk

02-23-2018, 12:50 PM	#4
hou30guy Drives: 2011 convertible 2ss/rs Join Date: Sep 2015 Location: Houston Posts: 971	408 stroker 10.1 compression, maggie jackshaft tvs 2300, rear od cog,front 2.9 sc pulley, btr pds stage 3 blower cam, nw 102mm tb,ls3 ported heads on a 6.0 bored .035 over iron block,1400cc injectors, fore dual pumps with flex sensor, ati od balancer 6%,circle d 3200 stall,18s drag pack,im sure im missing more Sent from my SM-N950U using Tapatalk

02-24-2018, 01:19 PM	#6
hou30guy Drives: 2011 convertible 2ss/rs Join Date: Sep 2015 Location: Houston Posts: 971	No the one for the zl1 camaro Sent from my SM-N950U using Tapatalk