315 35 20 on stock rims - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

drkllr · 12-22-2009, 04:48 PM

I have seen several post that 315 tires can fit under the back of my car. Some mentioned aftermarket wheels some did not say anything. I like the factory wheels and would like to stay with them if possible. Has anyone put 315s on factory wheels. How did it fit. Does anyone have pictures of them on there ride.

2010 2-Tone · 12-22-2009, 04:51 PM

They won't fit on factory wheels. You need at least 10.5" wheels in the rear.

drkllr · 12-22-2009, 05:05 PM

what will it cause on the 9"

brandotron · 12-22-2009, 05:10 PM

Quote:

Originally Posted by drkllr

what will it cause on the 9"

Uneven treadwear, possible blowout, and it'll look silly. Putting a 315 on a 9" rim defeats the purpose of buying 315s.

If you do a search, somebody on this board had their factory wheels widened. I believe they're running 315s now.

drkllr · 12-22-2009, 05:21 PM

Thank you that is a good idea. i wil look into that.

fontenl · 12-22-2009, 05:43 PM

what about 295 35 20 on rear and 265 40 20 on the front?

drkllr · 12-22-2009, 09:21 PM

i will run the 295 through the tire calculator. Mean while i am also looking at aftermarket wheels. does anybody have links to some good manufactures. I would like to explore all options before i make my final decision.

Danny Thomas · 12-22-2009, 11:20 PM

[QUOTE=drkllr;1312243]i will run the 295 through the tire calculator. Mean while i am also looking at aftermarket wheels. does anybody have links to some good manufactures. I would like to explore all options before i make my final decision.[/QUOTE

Forgeline Wheels

brandotron · 12-22-2009, 11:24 PM

Quote:

Originally Posted by drkllr

i will run the 295 through the tire calculator. Mean while i am also looking at aftermarket wheels. does anybody have links to some good manufactures. I would like to explore all options before i make my final decision.

Doesn't the HPE 650 come with Hennessey wheels and 315s? How did you end up with stock RS rims?

urr2slo · 12-23-2009, 12:05 AM

check out axiom or cor forged.

g-townmach · 12-23-2009, 08:03 AM

A 315 will work just fine on a 9 inch rim. Back when I had a cobra, we ALL put 315's on the stock 9 inchers with not a problem once.

drkllr · 12-23-2009, 10:51 AM

did not opt for the hennessey wheels at first i am talking with j howard now not sure what they got that i might like. i thought the stock wheels and tire would be fine. they just wont hold the power.

drkllr · 12-23-2009, 11:58 AM

i found one or two that i liked but they are brushed front polised drum i want polished both i still need more manufactures so i can keep lookin. I like the axiom ax-mo1 i would like to find that fully polished. If anyone knows of more please let me know.

Sack Rat 2SS · 12-24-2009, 05:38 PM

I have the CCW five spoke wheels. I am lowered 1 inch and no rub and fit inside the fender well. CCW also have a good looking split five spoke. Wheel and tire size are in my sig. ADM Perf has a package for using widened factory wheels to ablout 11 inches on the rear which will handle the 315's. Several of his customers including himself are running his factory wheel package. Looks very sleeper from the side and killer from the rear plus much less money spent on two rather than four wheels. Good Luck

12-22-2009, 04:48 PM	#1
drkllr Drives: 2010 Hennessey HPE 650 H.O ABM m6 Join Date: Nov 2009 Location: Tennessee Posts: 182 View My Garage	315 35 20 on stock rims I have seen several post that 315 tires can fit under the back of my car. Some mentioned aftermarket wheels some did not say anything. I like the factory wheels and would like to stay with them if possible. Has anyone put 315s on factory wheels. How did it fit. Does anyone have pictures of them on there ride.

12-23-2009, 08:03 AM	#11
g-townmach I FARTED Drives: 2010 2SS/RS Join Date: Nov 2009 Location: cen-tex Posts: 870	A 315 will work just fine on a 9 inch rim. Back when I had a cobra, we ALL put 315's on the stock 9 inchers with not a problem once. __________________

12-24-2009, 05:38 PM	#14
Sack Rat 2SS Drives: Silver SS/RS, Man 6 Join Date: Apr 2009 Location: DFW area, Texas Posts: 884	I have the CCW five spoke wheels. I am lowered 1 inch and no rub and fit inside the fender well. CCW also have a good looking split five spoke. Wheel and tire size are in my sig. ADM Perf has a package for using widened factory wheels to ablout 11 inches on the rear which will handle the 315's. Several of his customers including himself are running his factory wheel package. Looks very sleeper from the side and killer from the rear plus much less money spent on two rather than four wheels. Good Luck __________________ Silver 2SS/RS Man/6 CTS-V front 6-Piston Calipers, GM 3.91 Rear Gears

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3rd Gen Camaro Street Stock build thread (dialup beware)	zlathim	3rd Generation Camaros	9	12-06-2018 11:30 AM
RS 20" Rims + Pirelli Tires	asian cajun	Wheels / Tires	5	01-27-2010 02:21 AM
Powdercoat stock? Or new rims?	Blood	Wheels and Tires Talk Sponsored by The Tire Rack	4	10-13-2009 09:27 PM
Wheels or powdercoated stock rims?	Blood	Wheels and Tires Talk Sponsored by The Tire Rack	7	10-10-2009 01:19 AM
Kirk Kerkorian	KILLER74Z28	General Automotive + Other Cars Discussion	10	12-01-2006 05:11 PM

12-22-2009, 04:51 PM	#2
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	They won't fit on factory wheels. You need at least 10.5" wheels in the rear.

12-22-2009, 05:05 PM	#3
drkllr Drives: 2010 Hennessey HPE 650 H.O ABM m6 Join Date: Nov 2009 Location: Tennessee Posts: 182 View My Garage	what will it cause on the 9"

12-22-2009, 05:21 PM	#5
drkllr Drives: 2010 Hennessey HPE 650 H.O ABM m6 Join Date: Nov 2009 Location: Tennessee Posts: 182 View My Garage	Thank you that is a good idea. i wil look into that.

12-22-2009, 05:43 PM	#6
fontenl Drives: chevrolet camaro ss Ls3 Join Date: Aug 2009 Location: baton rouge Posts: 28	what about 295 35 20 on rear and 265 40 20 on the front?

12-22-2009, 09:21 PM	#7
drkllr Drives: 2010 Hennessey HPE 650 H.O ABM m6 Join Date: Nov 2009 Location: Tennessee Posts: 182 View My Garage	i will run the 295 through the tire calculator. Mean while i am also looking at aftermarket wheels. does anybody have links to some good manufactures. I would like to explore all options before i make my final decision.

12-22-2009, 11:20 PM	#8
Danny Thomas Drives: 67 RS, 81 Turbo TA, 2010 ABM 2SS/RS Join Date: Jul 2009 Location: Pigeon Forge Posts: 212	[QUOTE=drkllr;1312243]i will run the 295 through the tire calculator. Mean while i am also looking at aftermarket wheels. does anybody have links to some good manufactures. I would like to explore all options before i make my final decision.[/QUOTE Forgeline Wheels

12-23-2009, 12:05 AM	#10
urr2slo Drives: 2010 2ss ss/rs abm, 2016 2ss/rs hbm Join Date: Feb 2009 Location: N. Phx, Az Posts: 1,332	check out axiom or cor forged.

12-23-2009, 10:51 AM	#12
drkllr Drives: 2010 Hennessey HPE 650 H.O ABM m6 Join Date: Nov 2009 Location: Tennessee Posts: 182 View My Garage	did not opt for the hennessey wheels at first i am talking with j howard now not sure what they got that i might like. i thought the stock wheels and tire would be fine. they just wont hold the power.

12-23-2009, 11:58 AM	#13
drkllr Drives: 2010 Hennessey HPE 650 H.O ABM m6 Join Date: Nov 2009 Location: Tennessee Posts: 182 View My Garage	i found one or two that i liked but they are brushed front polised drum i want polished both i still need more manufactures so i can keep lookin. I like the axiom ax-mo1 i would like to find that fully polished. If anyone knows of more please let me know.