WANTED: How to Remove Grille

[The_Blur]

A lot of people are buying aftermarket grilles. Some are hesitating because they don't like the look of the grille with another grille in the background.

This is a very good point. The only extra grille you should have are the one in your backyard.

We need an instructional guide to removing the OEM grille. Get posting.

[bng804]

You will have to you will have to completely remove the front fascia to get at the grill. Removing the grill is easy once ya get the fascia off. This is a copy/paste from elsewhere I stuck in my notes for when the heritage grill eventually makes it's way to me









Fascia Removal

Remove the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement

1


Front Bumper Fascia Upper Support Push-In Retainer (Qty: 6)

2


Front Fender Support Bracket Screw (Qty: 2)

Tighten
7 N·m (62 lb in)

3


Front Bumper Fascia Outer Bracket Nut (Qty: 6)

Tighten
7 N·m (62 lb in)

4


Front Bumper Fascia Bolt (Qty: 2)

Tighten
3 N·m (27 lb in)

5


Front Bumper Fascia Lower Bolt (Qty: 2)

Tighten
7 N·m (62 lb in)

6


Front Bumper Fascia Lower Screw (Qty: 2)

Tighten
7 N·m (62 lb in)

7


Front Bumper Fascia Lower Retainer (Qty: 6)

8


Grill Removal

Disconnect the main electrical connector.






1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement(see procedure above)
2. Remove the front bumper energy absorber.
3. Place the bumper fascia face down on a clean protected surface.
4. Release the grille tabs securing the center grille to the front bumper fascia.



Tip
Each individual front bumper fascia tab must be secure to each slot in the center grille prior to re-assemble of the fascia to the vehicle.

[2SSRS@Gen5diy]

Its in the PDF from Gm on how to install the GFX, Here you go.

[The_Blur]

These are great responses. I appreciate the help, and I'm sure a long list of other Camaro5 members agree.

Now, this brings me to my next question.