![]() |
![]() |
#1 |
![]() Drives: 2011 synergy camaro lt Join Date: Feb 2021
Location: South Carolina
Posts: 34
|
Shifter Centering springs on v6
Hello. I wanted to share this hurst install with y’all!! This is how I dealt with the shifter centering springs on the v6 . I took the 10mm bolts off the dust boot and removed it from the top. Then you can take those pesky springs out! I was able to change this out in about three hours. I did install the springs back in too. Very nice shifter. It made a big difference.
Last edited by Frankieboy; 06-05-2021 at 05:55 PM. |
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() Drives: Camaro Convertible 2014 1LT Join Date: May 2019
Location: New Jersey
Posts: 1,020
|
Looks good!!!
![]()
__________________
|
![]() |
![]() |
|
|
![]() |
Thread Tools | |
|
|