Lingerfelter's fuel rail covers install - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

michael's maro · 02-21-2010, 08:26 PM

Finally got a day off from work on saturday to do the install of my fuel rail covers, we had to relocate the reservoir pump, we installed it on the back side of my CAI box.
We also re-routed the heater hoses, very good write up GMRULZ did on re-routing the heater hoses

SJ LYNN · 02-21-2010, 09:33 PM

Just when I think your car can't get any better, here you go again. You have really done a great job on making everything look factory installed yet Custom/Unique at the same time. LOOKS GREAT !!!!!

Oh yeah....Now that you have had it back since adding the last stage of your upgrades from MTI...what do you think about your new ring and pinion gear set? Still hanging loose out back ??? LOL

One of these days our paths are going to cross and I'm finally going to get to see your ride in person.

Shan

JM10 · 02-21-2010, 09:40 PM

Looks very nice without losing the stock look!!

michael's maro · 02-22-2010, 05:05 PM

Quote:

Originally Posted by SJ LYNN

Just when I think your car can't get any better, here you go again. You have really done a great job on making everything look factory installed yet Custom/Unique at the same time. LOOKS GREAT !!!!!

Oh yeah....Now that you have had it back since adding the last stage of your upgrades from MTI...what do you think about your new ring and pinion gear set? Still hanging loose out back ??? LOL

One of these days our paths are going to cross and I'm finally going to get to see your ride in person.

Shan

Gears are all broken it now, All I can say is holy sh*t...
Lots of power
It's to bad you can't make it for your Meet & Greet this saturday

2010 2-Tone · 02-22-2010, 05:07 PM

What ratio did you go with??? Was it a noticeable difference?

Buffnshine · 02-22-2010, 05:18 PM

Love it

michael's maro · 02-22-2010, 06:03 PM

Quote:

Originally Posted by 2010 2-Tone

What ratio did you go with??? Was it a noticeable difference?

3.73 gear ratio
what I noticed the most was the drone noise from my exhaust, it's 10 times better since the gear change.MBRP exhaust

g-townmach · 02-22-2010, 06:49 PM

Looks nice. Now all you got to do is smooth out that maggie and paint it to match!

viper1cobra · 02-23-2010, 08:24 PM

Very Nice. It adds a different look to the engine bay. Looking forward to seeing the car in April at C5Fest.

See you there.

BLACK10 · 02-23-2010, 09:51 PM

looks nice

02-21-2010, 08:26 PM	#1
michael's maro RAM'S CAMARO Drives: 2010 camaro ss 2015 Z-28 Join Date: Apr 2009 Location: mt. pleasant south carolina Posts: 1,025 View My Garage	Lingerfelter's fuel rail covers install Finally got a day off from work on saturday to do the install of my fuel rail covers, we had to relocate the reservoir pump, we installed it on the back side of my CAI box. We also re-routed the heater hoses, very good write up GMRULZ did on re-routing the heater hoses Attached Images __________________

02-21-2010, 09:40 PM	#3
JM10 Se habla español Drives: 2010 Camaro SS/RS VR Join Date: Jun 2009 Location: Arizona/Sonora Posts: 605	Looks very nice without losing the stock look!! __________________ 2010 VR 2SS/RS BMR Suspension Parts Hendrix HD Axles DSS Aluminum Shaft RPM Diff / 3.91 Gears LPE ZR1 Clutch Edelbrock E-Force SC / JRE Fuel Upgrade Livernois 1C cam 570 rwhp/559 rwtq SAE Best 1/4 time: 11.43

02-22-2010, 05:18 PM	#6
Buffnshine So Cal Camaro5 Race Team Drives: '10 SS/RS, '06 HHR, '70 El Camino Join Date: Sep 2009 Location: Huntington Beach, CA Posts: 2,589 View My Garage	Love it __________________ TEAM L99 - So Cal Camaro5 Race Team #27 9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels

02-22-2010, 06:49 PM	#8
g-townmach I FARTED Drives: 2010 2SS/RS Join Date: Nov 2009 Location: cen-tex Posts: 870	Looks nice. Now all you got to do is smooth out that maggie and paint it to match! __________________

02-23-2010, 08:24 PM	#9
viper1cobra Member Club Elite #131 Drives: 2017 50th Anniversary H50 2SS Join Date: May 2009 Location: Far West TEXAS Posts: 1,729 View My Garage	Very Nice. It adds a different look to the engine bay. Looking forward to seeing the car in April at C5Fest. See you there. __________________

02-21-2010, 09:33 PM	#2
SJ LYNN Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009 Location: Wellford,S.C. Posts: 25	Just when I think your car can't get any better, here you go again. You have really done a great job on making everything look factory installed yet Custom/Unique at the same time. LOOKS GREAT !!!!! Oh yeah....Now that you have had it back since adding the last stage of your upgrades from MTI...what do you think about your new ring and pinion gear set? Still hanging loose out back ??? LOL One of these days our paths are going to cross and I'm finally going to get to see your ride in person. Shan

02-22-2010, 05:07 PM	#5
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	What ratio did you go with??? Was it a noticeable difference?

02-23-2010, 09:51 PM	#10
BLACK10 Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009 Location: Lafayette, Louisiana Posts: 4,585	looks nice

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY : Install Performance Swaybars in 2010 Camaro	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	17	09-14-2015 01:36 AM
Camaro ls3 news...true or false?	Dark Knight	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	74	06-05-2008 06:29 PM
Bob Lutz, and Scott Settlemire on fuel economy.	Mr. Wyndham	Off-topic Discussions	19	11-18-2007 03:01 PM
Less Fuel and More Safety	TAG UR IT	General Automotive + Other Cars Discussion	2	10-14-2007 01:12 PM