02-25-2018, 01:14 AM | #1 |
Drives: 2013 2ss hotwheels Join Date: Aug 2014
Location: iowa
Posts: 270
|
STAINLESS WORKS +NO WEEDS
Iwent to order no weeds and was told they weren't sure if it would match up with stainless works. They said stock or american racing is what their set up for.Im sure someone could fabricate something ,but i want to do this myself.Does anyone have this setup?Pictures if you have them.Was it something you did yourself? I have sw headers no cats xpipe retrocatback
|
02-25-2018, 02:28 AM | #2 |
Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016
Location: Middletown, Ohio
Posts: 2,914
|
Easiest way to find out would be find the diameter of the pipe the Noweeds are replacing and the diameter of the Noweeds themselves and see if they match haha.
__________________
*SOLD*504HP/433TQ | Night Fury cammed Cold Air Inductions intake Bo White ported TB Speed Engineering 1 7/8 longtubes NPP catback QTP low profile cutouts Powerbond 25% UDP 3.73 gears JRE scoop ZL1 grille R1 Concepts drilled/slotted rotors built/tuned by Weapon X Motorsports
|
02-25-2018, 08:46 AM | #3 |
Started#gottalovethatblue
|
Stainless works headers should bolt up provided you order the correct outlet pipe for your cats/off road pipe. The question comes in with what do you have behind the cats? Doing some research on NoWeeds myself, it appears as though they have 2.5” piping and 2.75” piping for ZL1 cars. Their ARH kit is a shorter amount of piping to accommodate the different connection configuration that ARH’s system offers, but isn’t any different on pipe diameter. I hope this helps and good luck getting some nice diverters!
__________________
Last edited by pyroguy; 02-25-2018 at 12:36 PM. |
02-25-2018, 08:58 AM | #4 |
Drives: 2013 2ss hotwheels Join Date: Aug 2014
Location: iowa
Posts: 270
|
i didnt think he meant diameter wise, ithought he meant. routing or path wise.The videos ive seen have the divereters in the same area. Ijust assumed he meant the spacing between was now wider or narrower were i need to get them to the same area .like the path ofamerican racing is different. off the header
|
02-25-2018, 09:01 AM | #5 |
Drives: 2013 2ss hotwheels Join Date: Aug 2014
Location: iowa
Posts: 270
|
sorry i was asking my question. and you were already giving my answer pyroguy thanks
|
02-25-2018, 09:08 AM | #6 |
Drives: 2013 2ss hotwheels Join Date: Aug 2014
Location: iowa
Posts: 270
|
ill do the research i assumed. i was 3inches all the way from headers back
|
|
|
|
|