V6 Fuel Tank Pressure Sensor Location? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MIDNIGHTANGEL · 05-29-2018, 09:49 PM

I can’t find the location anywhere online or on here. I believe SS’s locations are different because hey said passenger side of tank easily accessible. So I went and jacked the car up check it out felt it up... Then got mobbed by mosquitoes So I’m a little pissed lol

ChibiBlackSheep · 05-30-2018, 08:23 AM

Are you running a code? Is there a reason you are looking for this?

Is this the sensor you want, or do you want the high pressure fuel sensor located near the high pressure fuel pump on the engine, under the fuel rail cover (back, driver's side, usually need to pull the upper intake to see)

MIDNIGHTANGEL · 05-30-2018, 10:20 AM

Yes running the code p0455 and p0497 they say to replace the fuel tank pressure sensor

ChibiBlackSheep · 05-30-2018, 11:44 AM

Those codes could be a few things. Loose gas cap (bad gasket on cap too), Purge solenoid which is on your passenger valve cover attached to upper manifold, bad vacuum line, etc.

If it is the vent solenoid, I see a lot of people saying you need to drop the rear-end to reach it.

010 VALVE. Fuel Tank Evaporator/Purge Control
011 CANISTER. Fuel Tank Evaporator/Purge Control
015 SENSOR. Early Fuel Evaporation. Fuel Tank Meter/Pump.

MIDNIGHTANGEL · 05-30-2018, 12:07 PM

I changed the solenoid and the gas cap lol DAMN that’s all the way up in there! Thank you so much bud!

ChibiBlackSheep · 05-30-2018, 01:10 PM

Yeah, might be worth taking this one into a shop, getting the system smoke tested to rule out a tear in a line, and then having them drop the subframe and changing it

05-29-2018, 09:49 PM	#1
MIDNIGHTANGEL Back4Revenge Drives: BLACK CAMARO Join Date: Jan 2009 Location: CHICAGO Posts: 451	V6 Fuel Tank Pressure Sensor Location? I can’t find the location anywhere online or on here. I believe SS’s locations are different because hey said passenger side of tank easily accessible. So I went and jacked the car up check it out felt it up... Then got mobbed by mosquitoes So I’m a little pissed lol __________________ *I chose my 6 with Pride..*

05-30-2018, 08:23 AM	#2
ChibiBlackSheep Drives: 2012 2SS/RS, 1968 SS Join Date: Feb 2012 Location: Southeast, PA Posts: 2,106	Are you running a code? Is there a reason you are looking for this? Is this the sensor you want, or do you want the high pressure fuel sensor located near the high pressure fuel pump on the engine, under the fuel rail cover (back, driver's side, usually need to pull the upper intake to see) __________________ LS3 Crate Engine Swap \| CSP Custom Cam 232/240 .615/.615 113 +3 \| Stainless Power LT Headers \| Z28 Intake \| Borla S-Type Exhaust \| FTI Triple-Disc Billet 3200 Stall 2012 Camaro 2SS/RS \| 1968 Camaro SS \| 2020 Cadillac CT5 Premium Luxury \| 2021 Spark LS

05-30-2018, 10:20 AM	#3
MIDNIGHTANGEL Back4Revenge Drives: BLACK CAMARO Join Date: Jan 2009 Location: CHICAGO Posts: 451	Yes running the code p0455 and p0497 they say to replace the fuel tank pressure sensor __________________ *I chose my 6 with Pride..*

05-30-2018, 11:44 AM	#4
ChibiBlackSheep Drives: 2012 2SS/RS, 1968 SS Join Date: Feb 2012 Location: Southeast, PA Posts: 2,106	Those codes could be a few things. Loose gas cap (bad gasket on cap too), Purge solenoid which is on your passenger valve cover attached to upper manifold, bad vacuum line, etc. If it is the vent solenoid, I see a lot of people saying you need to drop the rear-end to reach it. 010 VALVE. Fuel Tank Evaporator/Purge Control 011 CANISTER. Fuel Tank Evaporator/Purge Control 015 SENSOR. Early Fuel Evaporation. Fuel Tank Meter/Pump. __________________ LS3 Crate Engine Swap \| CSP Custom Cam 232/240 .615/.615 113 +3 \| Stainless Power LT Headers \| Z28 Intake \| Borla S-Type Exhaust \| FTI Triple-Disc Billet 3200 Stall 2012 Camaro 2SS/RS \| 1968 Camaro SS \| 2020 Cadillac CT5 Premium Luxury \| 2021 Spark LS

05-30-2018, 12:07 PM	#5
MIDNIGHTANGEL Back4Revenge Drives: BLACK CAMARO Join Date: Jan 2009 Location: CHICAGO Posts: 451	I changed the solenoid and the gas cap lol DAMN that’s all the way up in there! Thank you so much bud! __________________ *I chose my 6 with Pride..*

05-30-2018, 01:10 PM	#6
ChibiBlackSheep Drives: 2012 2SS/RS, 1968 SS Join Date: Feb 2012 Location: Southeast, PA Posts: 2,106	Yeah, might be worth taking this one into a shop, getting the system smoke tested to rule out a tear in a line, and then having them drop the subframe and changing it __________________ LS3 Crate Engine Swap \| CSP Custom Cam 232/240 .615/.615 113 +3 \| Stainless Power LT Headers \| Z28 Intake \| Borla S-Type Exhaust \| FTI Triple-Disc Billet 3200 Stall 2012 Camaro 2SS/RS \| 1968 Camaro SS \| 2020 Cadillac CT5 Premium Luxury \| 2021 Spark LS