![]() |
|
|
#1 |
|
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
Tach delay for a few seconds after starting the car.
I noticed the other day, when I started my car after a warm restart, the tach delayed for a few seconds. The battery is orìginal, but I always keep it on a trickle charger when I'm not driving it. Car is garaged kept so I assume the grounds are good.
Any ideas? |
|
|
|
|
|
#2 |
|
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
ttt
|
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
I'd start with a battery
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
|
|
|
|
|
#4 |
|
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
|
|
|
|
|
|
#5 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
Old batteries in these cars cause all sorts of strange electrical symptoms.
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
|
|
|
|
|
#6 |
|
Banned
Drives: cheby Camaro Join Date: Aug 2019
Location: usa
Posts: 575
|
I'll look when I go today, I think mine does the same thing.
|
|
|
|
|
|
#7 |
|
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
|
|
|
|
|
|
#8 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
Is everything else working fine and does it operate normally afterwards? I thought you had some other issues as well but i think i mixed up posts in my head.
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
|
|
|
|
|
#9 |
|
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
Yes, everything else works fine. The tach works normally and no other issues. It just freaked me out because I never actually noticed it before. Stays on the battery tender when parked. Original Delco battery.
|
|
|
|
|
|
#10 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
I wouldn't worry about it if that's the only thing you've noticed, could be normal and you just never noticed. If other strange stuff starts happening look at the battery possibility
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
|
|
|
|
|
#11 |
|
Banned
Drives: cheby Camaro Join Date: Aug 2019
Location: usa
Posts: 575
|
Well I tried it a few times, there is a delay but its not much. If you hadn't mentioned it I wouldn't have noticed.
|
|
|
|
|
|
#12 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,733
|
I thought the tach, speedo, and 4 packs did a full test sweep before they started? Or do you mean after that?
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
|
#13 |
|
Banned
Drives: cheby Camaro Join Date: Aug 2019
Location: usa
Posts: 575
|
The speedo and tach don't, as the engine starts the gauges on the console sweep.
|
|
|
|
|
|
#14 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,733
|
Wow...I am always missing the details lol.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
|
|
|
![]() |
|
|