06-15-2020, 06:32 PM | #1 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,316
|
Z/28 replicas on a ZL1
I keep looking at the Z/28 replica brushed wheels from MRR and I am thinking they would look killer on my black ZL1. What do you guys think? Has anyone have a set on a ZL1? If you do could you post a pic please. Thanks guys
|
06-15-2020, 10:35 PM | #2 |
Here's a few. 20x11 rears, 20x10 fronts.
__________________
2012 BLK ZL1 M6: Rotofab CAI,20in Z28 Reps,5% tint,6K leds/hids,VMaxx TB,JLT CC,BTR Stage2PDSTQ Cam & Valvetrain,Holley VC, AFCO HX,BK Fab HX Tank,MGW Flatstick,Kooks 2in coated headers catless,BMR bushings & arms,160*,2.45 upper,ID1050s,Shane Hinds tuned, Pedders Xa Coilovers,DSX Aux pump & Flex Fuel,Corsa.
|
|
06-16-2020, 05:13 PM | #3 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,316
|
|
06-17-2020, 09:25 PM | #4 |
Yes it is. They are black chrome. I think they are factory flow wheels. They were on the car when I purchased it fortunately. I get a lot of compliments on those wheels. I think they are the best looking wheels on a Camaro.
__________________
2012 BLK ZL1 M6: Rotofab CAI,20in Z28 Reps,5% tint,6K leds/hids,VMaxx TB,JLT CC,BTR Stage2PDSTQ Cam & Valvetrain,Holley VC, AFCO HX,BK Fab HX Tank,MGW Flatstick,Kooks 2in coated headers catless,BMR bushings & arms,160*,2.45 upper,ID1050s,Shane Hinds tuned, Pedders Xa Coilovers,DSX Aux pump & Flex Fuel,Corsa.
Last edited by SiC ZL1; 06-17-2020 at 10:30 PM. |
|
06-18-2020, 09:47 AM | #5 |
Drives: Chevrolet camaro zl1 Join Date: May 2019
Location: Tajas
Posts: 104
|
I have the same thing just in the semi gloss
__________________
2014 Sliver ZL1. Built engine, Stage 1 Frankenstein heads, Magnuson, SW long tubes, AFCO H/E, She Gone cam, flex fuel sensor, meth injection. 820rwhp e85.
|
06-18-2020, 09:37 PM | #6 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,316
|
I am really wanting something different and I am liking these but I am still looking around at different wheels. Just hard to choose from all that is out there and they will have to look right. O by the way nice car! I really like the SIM color.
Last edited by Bigtime53; 06-18-2020 at 09:39 PM. Reason: add to |
06-19-2020, 09:11 PM | #7 |
Drives: Chevrolet camaro zl1 Join Date: May 2019
Location: Tajas
Posts: 104
|
Thank you.
__________________
2014 Sliver ZL1. Built engine, Stage 1 Frankenstein heads, Magnuson, SW long tubes, AFCO H/E, She Gone cam, flex fuel sensor, meth injection. 820rwhp e85.
|
07-12-2020, 02:48 PM | #8 |
Drives: 2015 M6 ZL1, 2012 silverado Join Date: Apr 2019
Location: Chicago
Posts: 103
|
Here are mine. On the car when I bought it
__________________
2015 M6 ZL1 Bright Yellow: Cold Aid Inductions intake, 2.55 Griptec pulley,Kooks headers with high flow cats, Borla Atak cat back, ID1050's, Aux pump, Flex Fuel sensor 635whp 633wtq
|
07-19-2020, 12:46 PM | #9 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,316
|
|
07-20-2020, 07:50 AM | #10 |
Drives: 2013 ZL1 Camaro Join Date: Feb 2018
Location: Michigan
Posts: 222
|
I agree the best looking camaro wheel. In my mind they belong to the Z28 though.
|
07-20-2020, 09:13 AM | #11 |
Drives: 2015 ZL1 Join Date: Aug 2016
Location: Orland Park, IL
Posts: 68
|
Wheels
|
07-20-2020, 11:11 AM | #12 |
Drives: 2015 M6 ZL1, 2012 silverado Join Date: Apr 2019
Location: Chicago
Posts: 103
|
Thanks. It was on there when I got it. Part of the reason I went with this one instead of the other yellow I was looking at
__________________
2015 M6 ZL1 Bright Yellow: Cold Aid Inductions intake, 2.55 Griptec pulley,Kooks headers with high flow cats, Borla Atak cat back, ID1050's, Aux pump, Flex Fuel sensor 635whp 633wtq
|
10-10-2020, 09:32 PM | #13 |
Drives: 2014 white z28 Join Date: Apr 2019
Location: Washington
Posts: 176
|
Z28 clone wheels
. Best shot of my TSW wheels. If I had to do it over I would have got Race stars
Last edited by d kings z28; 03-10-2021 at 09:54 PM. Reason: More info |
|
|
|
|