05-06-2021, 07:11 PM | #1 |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 1,048
|
New Harrop Lsa 2650 supercharger
Did you guys see that harrop engineering USA came out with a Lsa 2650 that utilizes the factory lid. Just like kong performance but $800 cheaper.
https://harrop-usa.com/supercharger-kits/h2650i-lsa/
__________________
22% lower/ 2.5 upper/ 2 headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 1300/ dsx aux kit/ 103mm throttle body/ RPM 5 intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2 lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
05-06-2021, 07:12 PM | #2 |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 1,048
|
Harrop also made there own Lsa lid. It’s bigger and has a better brick.
__________________
22% lower/ 2.5 upper/ 2 headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 1300/ dsx aux kit/ 103mm throttle body/ RPM 5 intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2 lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
05-06-2021, 08:18 PM | #3 |
More options better for everyone
__________________
FBO. Cammed. Flex fuel.801whp/741wtq on e85
|
|
05-12-2021, 11:30 PM | #4 |
Learner of things
Drives: 2013 ZL1 M6 coupe, black Join Date: Dec 2017
Location: Tampa, Florida
Posts: 101
|
Nice!!! I wonder if it uses proprietary $200 pulleys like the Kong unit?
__________________
2013 M6. Cammed, straight piped, 17# boost, E85. Tuned by CHenry Motorsports. 825rwhp @ 6450, 812 rwtq @ 3500. Stock unported blower, stock heads, stock bottom end, stock throttle body. Boost only, no meth, no nitrous
|
05-13-2021, 06:32 AM | #5 |
|
|
05-13-2021, 12:06 PM | #6 |
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,380
|
Pictures PLEASE!!!
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // JMS // Elite Ultra CC // BMR MM // BC Forged KL13
Past Rides- 2014 ZL1 M6 Red Hot | Tons of mods 2004 CTS-V M6 Silver | Many mods 1995 Corvette M6 Torch Red | A few more mods 1992 Camaro M5 White | A few mods |
05-13-2021, 01:53 PM | #7 |
Drives: 2014 Camaro ZL1 Join Date: Jun 2015
Location: Michigan
Posts: 42
|
I have a Harrop 2650 on order and should have it installed with an e85 flex fuel setup (dsx auxillary and 1300 injectors) within the next few weeks. I am running stock heads and cam for now so will be interested to see what kind of numbers it will put down. My car already has heat exchanger, 2" headers, CAI and 10% lower pulley on it now. My plan for phase 2 this winter will be to do the heads and cam. I'll post up pictures and dyno results after the installation is complete.
__________________
2014 ZL1 "Blackbird" 872 whp on e85
|
05-13-2021, 03:36 PM | #8 |
Drives: 2013 ZL1 Join Date: May 2019
Location: Texas
Posts: 111
|
|
05-13-2021, 05:46 PM | #9 |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 1,048
|
It’s in the YouTube video. I believe they said it’s still in development.
__________________
22% lower/ 2.5 upper/ 2 headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 1300/ dsx aux kit/ 103mm throttle body/ RPM 5 intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2 lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
|
|
|
|