05-15-2022, 02:35 PM | #1 |
Drives: 2011 SS mara Join Date: Apr 2022
Location: California
Posts: 6
|
Catch Can install
Hi everyone. I installed my catch can for under 40 bucks and this is what I used.
Check photos 5 ft of fuel hose (3/8) Four 3/8 hose clamps Two brass 3/8 fitting from home Depot (the stock fittings are poorly made) One flat corner brace part number 339474 from home Depot (they have the holes in the perfect place for these 20 dollar catch cans plus using loctite) Bad fuel= collections. Chevron/shell= no collections in can. 76 fuels had the highest water milkshake collection in my can. The can gets hot by the headers so it evaporates a lot of water before steam gets into the intake. With good fuel my car idles much more reliability. Bad fuel bad idle. I'm sure you all know this by now. I'm new to this forum so bear with me. Lol |
Tags |
camaro 10 11 12, catch can, installation, l99, ls3 |
|
|