03-15-2023, 02:42 PM | #1 |
Transmission removal/Clutch replacement
So I am working on removing my trans to replace my clutch. It’s the first time I have tried to do this so bare with me here. There a great post on replace the clutch on here which has been very helpful but it’s on a ZL1. I have everything disconnected with the exception of one of the trans cooler lines which is pictured below. It’s a different set up on my 15 1LE than I can find anywhere. I have taken the clip off the fitting but I can’t get this line to come out. I’ve pryed on it a bit but don’t want to destroy it so that it won’t reseal when I’m putting it back on. Also once I have it off I’m pretty sure I won’t be able to move it around much to drop the trans. Any advice would be helpful. I’m a beginner at best wrenching on this car but I’m bound and determined to learn how to wrench on this car.
Thanks in advance |
|
03-15-2023, 04:14 PM | #2 |
I finally got it out, just need to pull a little harder
|
|
03-15-2023, 07:33 PM | #3 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,846
|
When you go to reinstall put the clip in first and then just pop it right in
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
|
|
|
|