06-16-2023, 07:33 PM | #1 | |
Drives: '94 Z28+ '15 Z/28 Join Date: Jun 2009
Location: Cheektowaga, NY
Posts: 1,304
|
Weighed her today!
3564
__________________
1973 Mach 1, 351C cruiser
'15 Z/28 Red Hot, A/C 1980 Z28- resto-mod project 1979 Y84 Trans Am 1986 IROC-Z |
|
06-16-2023, 08:51 PM | #2 |
Drives: 2014 Z/28 Join Date: Jul 2022
Location: CA
Posts: 91
|
That's much lighter than mine, what have you done for weight savings ? Do you have the weight distribution F/R.
50% gas. LF 1000 1042 RF LR 920 829 RR Total 3791 lbs Cross 1962 lbs 51.75% |
06-18-2023, 06:05 AM | #3 |
Drives: '94 Z28+ '15 Z/28 Join Date: Jun 2009
Location: Cheektowaga, NY
Posts: 1,304
|
I could have looked at the F/R but I was just wondering about the total weight. My car has just about everything you could do without cutting it up. Biggest weight savings were going to Kirkey seats instead of the heavy Recaro's. It has a ton of stuff removed. The wheels/tires are much lighter, etc. I could get it race ready and under 3500 if I wanted to. It probably has 40 extra lbs of fuel in it.
__________________
1973 Mach 1, 351C cruiser
'15 Z/28 Red Hot, A/C 1980 Z28- resto-mod project 1979 Y84 Trans Am 1986 IROC-Z |
06-18-2023, 06:36 AM | #4 | |
Drives: 14 Z/28 #368 02 SS(sold) 2012 Equus Join Date: Jul 2019
Location: Brooklyn, NY
Posts: 186
|
Quote:
__________________
2014 Z/28 #368
|
|
06-18-2023, 09:48 AM | #5 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
What wing are you running???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-19-2023, 06:28 AM | #6 |
Drives: '94 Z28+ '15 Z/28 Join Date: Jun 2009
Location: Cheektowaga, NY
Posts: 1,304
|
Apex SM-10 in 18x11, with Yokohama A052's in 315/30/18
Front wheels: https://www.apexraceparts.com/shop-b...aro-wheel.html Rear wheels: https://www.apexraceparts.com/shop-b...aro-wheel.html It's from a company called Wing-logic, and the upper piece is just a flat piece of aluminum that I mounted. Endplates are custom from 2 flat sheets of carbon fiber. I have an upper wing element on order from 9-lives racing, but from talking to a lot of people, I likely won't see it for 20-30 weeks. https://wing-logic.com/product/65in-racing-wing/
__________________
1973 Mach 1, 351C cruiser
'15 Z/28 Red Hot, A/C 1980 Z28- resto-mod project 1979 Y84 Trans Am 1986 IROC-Z |
06-19-2023, 07:29 AM | #7 | |
|
Quote:
|
|
06-19-2023, 08:36 AM | #8 | |
Drives: 2015 Z/28, 2015 1LE Join Date: Feb 2017
Location: Nevada
Posts: 599
|
Quote:
|
|
|
|
|
|