02-23-2024, 03:11 PM | #1 |
OE 1LE Splitter (Damaged)
Just testing if there is any interest in the slightly damaged OE splitter from my 2013 1LE.
It is taking up room in my shop and I know these are quite difficult to find. I was going to toss it in the dumpster but I figured I would put it up here in case someone wanted a little project. So, if someone wants to take on a slight repair job to have an OE splitter, please have at it. I removed it because it got damaged when I dodged a deer, but had to go off into the grass shoulder/ditch. That bit of off-road journey damaged the driver side of the splitter. There is heavy scratching on the driver side and a slight bend on the far drivers side. Most of the original mounting clips were broken off and are not included. Shipping will be a bit pricy due to size. If there is any interest, make an offer!
__________________
2013 1SS/1LE
Corsa Extreme cat-back, Speed Engineering LT Headers with black ceramic coating, C7 Z06 Front Brake Upgrade, Custom Mishimoto Oil Cooler, BMR Tunnel Brace, Custom Dual Mishimoto Oil Catch Cans, MSD Plug Wires, Mishimoto Radiator and Hoses, Melling High Volume/High Flow Oil Pump, Improved Racing Oil Pan Baffle Kit, Improved Racing Oil Pressure Bypass Delete, Improved Racing Oil Pick-up Tube Clamp. |
|
02-23-2024, 08:21 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,088
|
What shipping be to 37042?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
02-23-2024, 09:20 PM | #3 |
"Cam Only"
|
I'd be interested. Shipping to 85260?
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
02-26-2024, 11:12 AM | #4 |
Looks to be about $60 on the FedEx calculator.
Says around $45 Honestly, these prices are way cheaper then I expected. I asked my shipping guy at my work about shipping it and he said it would be more like $130... Don't know who is right.
__________________
2013 1SS/1LE
Corsa Extreme cat-back, Speed Engineering LT Headers with black ceramic coating, C7 Z06 Front Brake Upgrade, Custom Mishimoto Oil Cooler, BMR Tunnel Brace, Custom Dual Mishimoto Oil Catch Cans, MSD Plug Wires, Mishimoto Radiator and Hoses, Melling High Volume/High Flow Oil Pump, Improved Racing Oil Pan Baffle Kit, Improved Racing Oil Pressure Bypass Delete, Improved Racing Oil Pick-up Tube Clamp. |
|
02-27-2024, 09:44 PM | #5 |
"Cam Only"
|
I'll gladly pay for you to ship this to me if it's around that ballpark. Let me know!
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
|
|
|