08-19-2023, 05:08 PM | #1 |
Drives: 2014 2SS/RS MT Join Date: Jun 2021
Location: CT
Posts: 42
|
HP Tuner can't write to vehicle
Trying to install new remote tune, for some reason the "write vehicle" tab is greyed out. Anyone experience this? Tried reconnecting, restarting software, etc.
|
08-19-2023, 05:13 PM | #2 |
|
You can try to resync the interface
It's under the HELP tab
__________________
Last edited by FasNuf; 08-19-2023 at 06:03 PM. |
08-19-2023, 05:46 PM | #3 |
Drives: 2023 Camaro SS Join Date: Aug 2023
Location: Arizona
Posts: 25
|
Always make a backup first! Luckily, the SCTFlash software I used would not let me write until I had saved current tune! I bricked my 5th gen a few times and being able to easily flash back to factory settings or previous tune was definitely needed.
Also with some of them you got to connect cable to laptop and OBDII before you turn on accessory. Obviously you don't want to actually start the engine if you're going to flash but most tuners work better if you connect the software BEFORE turning on the car as they typically hook into the boot routine to know when the init is done, read codes, params, etc.
__________________
'23 Blue Camaro SS: "Pegasus"
----- gone, but not forgotten ----- '11 Gray Camaro LS: "Copmaro" '02 Red Camaro Z28: "Chimero" '01 Gold Camaro: "Goldie" '98 Black Firebird: "Blackhawk" Yes, I name cars, but they don't seem to mind. |
08-19-2023, 05:48 PM | #4 |
Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020
Location: WNY
Posts: 789
|
This ^ & make sure you are using the beta version & verify your file is actually open.
Edit: By verifying the file is open I mean the right file is showing on the screen. When I had the original version when I started the VCM editor it would create a new blank file. When I opened my tune file it was not showing. I had to close the new blank file first & then reopen the file I wanted. In the beta version it does not do that.
__________________
2013 2SS GPI built & tuned 415, spec'd by Andrew Cammer. GPI ported intake/tb/heads, Tooley springs, CHE trunnions, Callies rotating assembly, Diamond pistons, GPI SS3 VVT, ATI 10% ud damper, Circle D 3800, Kooks ceramic coated lt's with green cats, Mishimoto rad & oil cooler, Derale trans cooler, Holley efi rails.
Last edited by acutron42; 08-21-2023 at 01:53 AM. |
08-20-2023, 07:48 AM | #5 |
Drives: 2013 ZL1 Join Date: Sep 2021
Location: Virginia
Posts: 369
|
Hp tuners is pretty responsive when you email them. I had a similar issue, turns out my AEM O2 gauge that was plugged in series to my OBD2 port was the culprit, even though I had written tune before with it in.
Stupid question but I have to ask-did you did buy credits for it? |
08-21-2023, 10:29 AM | #6 |
Drives: 2014 2SS/RS MT Join Date: Jun 2021
Location: CT
Posts: 42
|
I figured it out, user error, wasn't opening the correct file. Also, wasn't aware that HP Tuners now needs a credit purchased for the FSCM, bringing the total to 3 credits.
|
11-08-2023, 08:31 AM | #7 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,277
|
Quote:
If you don't want to write your FSCM you can remove it from the file, save as, then open then write the vehicle with only 2 credits. Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
03-25-2024, 07:55 AM | #8 | |
Drives: 2010 Chevy Camaro 2SS coupe (MT) Join Date: Jan 2024
Location: Sacramento, CA - USA
Posts: 113
|
How to delete FSCM? + other tuning/platform question(s)
Quote:
Also, I saved the tune file as is, the first time that I read the car (ECM?). Would that count as a stock file I can revert the car back to, if I needed to bring the car to a licensed Chevrolet dealership for any major work? I did alter that tune and saved the altered one as a separate one, so I assumed that the first (clean) file would be as good as a stock file. I had the car tuned with a Diablosport inTune i3 8200, but restored the car back to factory, so I also assumed that my car was ready to be tuned with HP Tuners. I believe the new owner that buys my inTune flash tuner, would still have to purchase their own license, to be able to connect to their car's ECM and tune it? |
|
03-25-2024, 08:24 AM | #9 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,277
|
Quote:
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
04-10-2024, 12:09 PM | #10 |
Drives: 2011 Camaro SS 6sp Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,905
|
Interesting, I didnt know that. I always did a fresh Read and excluded the FSCM controller from the read. Then made my changes, saved, write.
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes... |
|
|
|
|