went to dyno today - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sspaul · 07-06-2010, 04:47 PM

i went dyno tune my car today. base line was 407.31 hp at wheels and 402.22 tq at wheels. the base line included the mods i had already done, the c.a.i., underdrive, borla long tubes, and borla atak. after the tune it pulled 415.48 hp at wheels and 419.18 tq at wheels. i'm very happy with these results

2010 2-Tone · 07-06-2010, 05:03 PM

Nice.

fcu678 · 07-06-2010, 05:31 PM

Quote:

Originally Posted by 2010 2-Tone

Nice.

X2

sspaul · 07-06-2010, 05:39 PM

thanks

2010 SSRS · 07-06-2010, 05:39 PM

awesome numbers, wish we did not lose so much Horsepower with the Automatic's, mine has 375 RWHP with LT's, Corsa, ADM CAI and Tuned.

longbeachss2010 · 07-06-2010, 07:26 PM

hey wat was the mesurement belts for the underdrive pulley . i wana make sure i buy the right once. few people say its smaller

sspaul · 07-06-2010, 07:33 PM

Quote:

Originally Posted by longbeachss2010

hey wat was the mesurement belts for the underdrive pulley . i wana make sure i buy the right once. few people say its smaller

for the main belt use gates belt part #k060825 for the other belt look for it on slp's website. i can't remeber off hand what the part number is

sspaul · 07-06-2010, 07:33 PM

Quote:

Originally Posted by 2010 SSRS

awesome numbers, wish we did not lose so much Horsepower with the Automatic's, mine has 375 RWHP with LT's, Corsa, ADM CAI and Tuned.

yeah that sucks the auto's have less power than the manual's

topgun1 · 07-06-2010, 07:42 PM

that's some serious gains for minimal improvements.

v6sonoma · 07-06-2010, 09:51 PM

Nice! You picked up quite a bit of torque with the tune.

longbeachss2010 · 07-07-2010, 12:44 PM

Quote:

Originally Posted by sspaul

for the main belt use gates belt part #k060825 for the other belt look for it on slp's website. i can't remeber off hand what the part number is

well i have the slp pulley . just wana make sure i buy the right belt siez. i should hopefully get my tl and cats install end of this month . hopefully i get 400 to. show that auto are ass powerfull as manual

sspaul · 07-07-2010, 01:12 PM

Quote:

Originally Posted by longbeachss2010

well i have the slp pulley . just wana make sure i buy the right belt siez. i should hopefully get my tl and cats install end of this month . hopefully i get 400 to. show that auto are ass powerfull as manual

that would be cool if you could get to 400 with basic bolt ons

sspaul · 07-07-2010, 01:12 PM

Quote:

Originally Posted by topgun1

that's some serious gains for minimal improvements.

thanks, i'm more than happy with the results

sspaul · 07-07-2010, 01:13 PM

Quote:

Originally Posted by v6sonoma

Nice! You picked up quite a bit of torque with the tune.

yeah the torque came up nice

07-06-2010, 04:47 PM	#1
sspaul Drives: 2010 ss camaro, imperial blue Join Date: Sep 2009 Location: new orleans Posts: 939	went to dyno today i went dyno tune my car today. base line was 407.31 hp at wheels and 402.22 tq at wheels. the base line included the mods i had already done, the c.a.i., underdrive, borla long tubes, and borla atak. after the tune it pulled 415.48 hp at wheels and 419.18 tq at wheels. i'm very happy with these results __________________ my youtube my facebook www.myspace.com/1djchampagne www.twitter.com/1djchampagne mods: borla long tube headers, borla atak catback, lingenfelter gt-9 cam, ported heads, ecs base kit running 11 psi on top end, 1" bmr drop spring, aam 3.70 gears, ported throttle body, 160* thermorstat, lethal racing tune 750/641 rwhp/rwtq

07-06-2010, 05:39 PM	#4
sspaul Drives: 2010 ss camaro, imperial blue Join Date: Sep 2009 Location: new orleans Posts: 939	thanks __________________ my youtube my facebook www.myspace.com/1djchampagne www.twitter.com/1djchampagne mods: borla long tube headers, borla atak catback, lingenfelter gt-9 cam, ported heads, ecs base kit running 11 psi on top end, 1" bmr drop spring, aam 3.70 gears, ported throttle body, 160* thermorstat, lethal racing tune 750/641 rwhp/rwtq

07-06-2010, 05:39 PM	#5
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	awesome numbers, wish we did not lose so much Horsepower with the Automatic's, mine has 375 RWHP with LT's, Corsa, ADM CAI and Tuned. __________________ Jannetty Racing JRE Street Package

07-06-2010, 07:42 PM	#9
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,939 View My Garage	that's some serious gains for minimal improvements. __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

07-06-2010, 09:51 PM	#10
v6sonoma Drives: 2010 SS RS Join Date: Jun 2009 Location: Providence, RI Posts: 8,108 View My Garage	Nice! You picked up quite a bit of torque with the tune. __________________ Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery!

07-06-2010, 05:03 PM	#2
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	Nice.

07-06-2010, 07:26 PM	#6
longbeachss2010 Drives: black SS Join Date: Apr 2010 Location: long beach ca Posts: 363	hey wat was the mesurement belts for the underdrive pulley . i wana make sure i buy the right once. few people say its smaller

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Photos from dyno day at Total Performance near Charlotte, NC	topgun1	Camaro Photos \| Spyshots \| Video \| Media Gallery	23	05-10-2010 07:19 PM
DYNO, INSTALL, DYNO, TUNE, DYNO	JANNETTYRACING	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	20	11-17-2009 06:11 PM
Going to the track today (Dyno 704 rwhp)	JoeMClassic	Dragstrip and Launch Techniques Discussion	23	09-22-2009 10:24 PM
Dyno Dynamics AWD Dyno @ Hennessey Performance	Hennessey Performance	USA - Texas	0	08-08-2009 11:03 AM
SGOS's - L99 A6 Dyno results (after dyno tune)	SGOS252382	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	48	07-27-2009 02:13 PM