UK Knightlight (scanner) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Kevinshawnm · 11-26-2011, 09:02 AM

Has anyone installed one of these?

Rcfiddy1 · 11-26-2011, 09:23 AM

Yes, a few times

msp2887 · 11-26-2011, 10:44 AM

They're supposed to be really easy to install, even easier than the AAC version. Only problem is is that it's much more expensive, and you'll be waiting a while to get one.

TCAT · 11-26-2011, 10:58 AM

I have one and it was an easy install for the most part. No cutting is necessary considering the mailslot piece is specifically molded to work in that spot. The light works good and flows very well. I can't really complain about it. I have the dual color red/blue one. It is definitely more expensive for sure, and that's likely because of the way it engineered to fit in the mailslot. Don't me wrong, it should be MUCH cheaper than it is, but overall it a good product that involves no cutting whatsoever. I get compliments on it all the time and really causes attention at car shows. If the shop installs it, have them try to route the wiring so it's almost completely hidden. It looks much better when you take your time. I think there may be a picture of it in my build thread, but I don't know if it's a good picture though. If anything, I would like the remote to have a longer distance, but that's not really a deal breaker for me, lol. It's good enough.

11-26-2011, 09:02 AM	#1
Kevinshawnm Biggz Drives: 2010 Camaro 2SS L99 Rally Yellow Join Date: Jul 2011 Location: Richmond, Indiana Posts: 567	UK Knightlight (scanner) Has anyone installed one of these?

11-26-2011, 09:23 AM	#2
Rcfiddy1 Sold car... Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009 Location: Manalapan, New Jersey Posts: 2,019 View My Garage	Yes, a few times __________________ Build Thread ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAC Night Rider Scanner vs KS4264 Scanner	benradmo	Cosmetics and Lighting Modification Discussions	8	05-20-2011 12:36 AM
Activate knightlight with lock/unlock - is this do-able?	Darth V8R	Cosmetics and Lighting Modification Discussions	3	06-13-2010 09:01 PM
2010 Camaro KITT scanner lights for SS mail slot	Spaceballone	Exterior Parts & Accessories	1204	05-24-2010 11:02 PM
K.I.T.T 2010 Scanner	Spaceballone	Exterior Parts & Accessories	97	05-12-2010 08:15 AM
Favorite Knightlight scanner pattern	FRKNlo	Cosmetics and Lighting Modification Discussions	0	05-06-2010 02:00 AM

11-26-2011, 10:44 AM	#3
msp2887 Drives: 2011 2SS/RS Black Join Date: Feb 2011 Location: Hillsborough, NJ Posts: 234	They're supposed to be really easy to install, even easier than the AAC version. Only problem is is that it's much more expensive, and you'll be waiting a while to get one.

11-26-2011, 10:58 AM	#4
TCAT Drives: Has Wheels Join Date: May 2011 Location: On Earth Posts: 5,553	I have one and it was an easy install for the most part. No cutting is necessary considering the mailslot piece is specifically molded to work in that spot. The light works good and flows very well. I can't really complain about it. I have the dual color red/blue one. It is definitely more expensive for sure, and that's likely because of the way it engineered to fit in the mailslot. Don't me wrong, it should be MUCH cheaper than it is, but overall it a good product that involves no cutting whatsoever. I get compliments on it all the time and really causes attention at car shows. If the shop installs it, have them try to route the wiring so it's almost completely hidden. It looks much better when you take your time. I think there may be a picture of it in my build thread, but I don't know if it's a good picture though. If anything, I would like the remote to have a longer distance, but that's not really a deal breaker for me, lol. It's good enough.