Ls fogs done

[tysoncrosby21]

Led plasma bulbs from ijdm

Assembly from ebay

Cut the existing bezel plugs out

Wiring from phastek to the side markers

Sorry for crappy pic, had to take it in the garage for the darkness plus cell phone pic....

[awfarley]

Links and cost? Looks sweet.

Next up:
Halos
HIDs
or Retrofit
Grille lighting

[tysoncrosby21]

Retrofit with ccfl halos coming in the spring after tax return money. When I get to my computer ill link to the parts

Assembly: http://www.ebay.com/itm/160862006076...84.m1497.l2649

Comes with H3 halogen bulbs and a connector

Bulbs: http://store.ijdmtoy.com/High-Power-...s-p/sku335.htm

You have to melt the solder on the existing halogen bulb and pop it off. Then cut the connector off the plasma bulbs and strip the insulation back and solder it to the connector.

Bezels: I just used a utility knife to cut the plug out and then sanded off all the burrs from cutting out the plug.


wiring: Just send an email to the phastek sales (SALES@phastekperformance.com) and tell them you want to buy the LS fog light kit wiring assembly. It's the wiring kit people use on the RS camaro's but instead of two spades on the ends one of them has a mini connector to hook up to your fog lights. They don't have the wiring assembly on teh website, you have to request an order and they'll make one for you, then you pay for it. It's only a 10$ kit then was like 7$ to ship it. Much cheaper than the 120$ wiring harness people use and this works just the same.

you then splice into the side marker lights and connect to your new bulbs and boom done.

I didn't take any pics of the actual wiring/solder but it's pretty easy to figure out once you get all the parts.

[ZL-Bee]

Looks good!

[tysoncrosby21]

Thanks!!
Was kind of a pain in the arse to get the old bulbs off and solder/install the new bulbs but it was fun none the less once it was done and I got to see the results!

[tysoncrosby21]

My next step before I retrofit will be switchback Led turn signals/parking lights