whats is the diff with body kits?? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Team STILLEN · 10-24-2012, 06:08 PM

All of our Stillen components are made with Urethane!! The look, fit, feel and finish are factory quality!

http://www.camaro5.com/forums/showthread.php?t=253556

PM or Call me if you are interested!!

dangjohnny · 10-24-2012, 06:36 PM

OEM GFX with ZL1 front bumper ftw!

parkerss · 10-24-2012, 10:54 PM

Quote:

Originally Posted by Team STILLEN

All of our Stillen components are made with Urethane!! The look, fit, feel and finish are factory quality!

http://www.camaro5.com/forums/showthread.php?t=253556

PM or Call me if you are interested!!

PM Sent

SummoneR · 10-25-2012, 02:48 AM

One of my favorite looking kit is the GM kit.

I have a 3D Carbon kit, it is not Carbon Fiber it is poly. The body shop said this was the best fitting and quality kits he had ever seen. He also said Stillen is up there with it.

My kit had no air bubbles in it at all it was smooth and clean. The rear spoiler need some extra screws to stay down. Other than that he said the quality was top notch and the price was the best! I couldn't afford the GM kit, these were cheaper and great quality, the side skirts look very similar to the GM side skirts.

leonardo · 10-25-2012, 11:00 AM

Quote:

Originally Posted by YUBslow

OEM GFX with ZL1 front bumper ftw!

Quote:

Originally Posted by SummoneR

One of my favorite looking kit is the GM kit.

I have a 3D Carbon kit, it is not Carbon Fiber it is poly. The body shop said this was the best fitting and quality kits he had ever seen. He also said Stillen is up there with it.

My kit had no air bubbles in it at all it was smooth and clean. The rear spoiler need some extra screws to stay down. Other than that he said the quality was top notch and the price was the best! I couldn't afford the GM kit, these were cheaper and great quality, the side skirts look very similar to the GM side skirts.

i agree that the GM kit is a bit overpriced but anytime GM makes anything its always going to be about 50% over marked then what other manufactures would charge for the same quality kits, only difference is its "GM certified" so you cant go wrong with other kits out there so dont worry, just pick the one you like

Team STILLEN · 10-25-2012, 01:09 PM

Quote:

Originally Posted by parkerss

PM Sent

PM Replied!

Michaels2011 · 10-25-2012, 02:25 PM

I have had no problems with the RAZZI GFX....

10-24-2012, 06:36 PM	#16
dangjohnny Drives: ‘21 ZL1 1LE 6MT Join Date: Jul 2012 Location: Floribama Posts: 622	OEM GFX with ZL1 front bumper ftw! __________________ ZL1 1LE Black - 6MT - PDR - Nav - Michelin PS4s

10-25-2012, 02:48 AM	#18
SummoneR Paul Drives: '10 2SS/RS M6 "Marauder" Join Date: Mar 2009 Location: NOR*CAL Posts: 6,230	One of my favorite looking kit is the GM kit. I have a 3D Carbon kit, it is not Carbon Fiber it is poly. The body shop said this was the best fitting and quality kits he had ever seen. He also said Stillen is up there with it. My kit had no air bubbles in it at all it was smooth and clean. The rear spoiler need some extra screws to stay down. Other than that he said the quality was top notch and the price was the best! I couldn't afford the GM kit, these were cheaper and great quality, the side skirts look very similar to the GM side skirts. __________________

10-25-2012, 02:25 PM	#21
Michaels2011 Drives: 2014 2lt/RS Join Date: Aug 2010 Location: St Augustine Posts: 564 View My Garage	I have had no problems with the RAZZI GFX.... __________________ K&N cai..... WCC underhood lighting.... 1LE strut tower brace.... Custom painted Fuse box/engine covers & strut tower brace.... Pfadt 1.25 lowering springs.....Ghosted side markers.....

10-24-2012, 06:08 PM	#15
Team STILLEN Drives: Varies Join Date: Dec 2009 Location: Costa Mesa, CA Posts: 2,182	All of our Stillen components are made with Urethane!! The look, fit, feel and finish are factory quality! http://www.camaro5.com/forums/showthread.php?t=253556 PM or Call me if you are interested!!