![]() |
|
|
#1 |
![]() Drives: 2013 Chevy Camaro 1SS LS3 Join Date: Oct 2012
Location: Burbank, CA
Posts: 251
|
Solo HFC CEL light
Got a CEL today got the error code ( P0430) has something to do with passenger side cat.
|
|
|
|
|
|
#2 |
|
Self Made Thousandaire
Drives: 2011 SS/RS RJT Join Date: Aug 2010
Location: Arkansas
Posts: 323
|
Has it been tuned?
|
|
|
|
|
|
#3 |
![]() Drives: 2013 Chevy Camaro 1SS LS3 Join Date: Oct 2012
Location: Burbank, CA
Posts: 251
|
It has been tune before but i went back to stock but was stock when I got the cats installed
|
|
|
|
|
|
#4 |
|
Self Made Thousandaire
Drives: 2011 SS/RS RJT Join Date: Aug 2010
Location: Arkansas
Posts: 323
|
Sounds like you need a tune with the cats installed. That should be all it takes to clear your cel. Be careful of your emmisions out in Cali with those HF cats.
|
|
|
|
|
|
#5 |
![]() Drives: 2013 Chevy Camaro 1SS LS3 Join Date: Oct 2012
Location: Burbank, CA
Posts: 251
|
I'll tune it and see if that clears the CEL. I kept my old cats so when it comes time to do a smog check I'll switch them out so it can pass the emissions test.
|
|
|
|
|
|
#6 |
|
Self Made Thousandaire
Drives: 2011 SS/RS RJT Join Date: Aug 2010
Location: Arkansas
Posts: 323
|
That should work.
|
|
|
|
|
|
#8 |
![]() Drives: 2013 Camaro RS 1LT, 6M Join Date: Jan 2013
Location: Albany, OR
Posts: 603
|
I installed mine about two weeks ago and no CEL's. That's about 700 miles ago.
__________________
|
|
|
|
|
|
#9 |
![]() Drives: 2013 Chevy Camaro 1SS LS3 Join Date: Oct 2012
Location: Burbank, CA
Posts: 251
|
Mine were installed this past saturday and today I got the CEL
|
|
|
|
|
|
#10 |
![]() Drives: 45th anniversery rs v6 camaro Join Date: Nov 2012
Location: santa clarita
Posts: 18
|
MIne showed up for about 5 days then went away
|
|
|
|
|
|
#11 |
|
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
These absolutely should not throw a code. I would check the bolts one everything over again underneath
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
|
|
|
|
|
#12 |
![]() Drives: 2012 Camaro LFX,CAI,DynomaxVT,RX CC Join Date: Feb 2012
Location: So Cal Mtns
Posts: 526
|
I thought they claim that the high flow cats are OVER size for the car, hence passing smog should be no problem?
__________________
From my cold dead hands......
|
|
|
|
|
|
#13 |
![]() Drives: 2012 2lt rs Join Date: May 2012
Location: sac california
Posts: 49
|
Like TRC said i would def check everything over again!
|
|
|
|
|
|
#14 |
|
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,648
|
The code means catalyst system efficiency below threshold. When this code pops on a car with high flow cats it is pretty harmless. The rear o2s are there to make sure the cats are in place. High flow cats might flow ten times better then the factory units but they don't burn off the unburnt gas as well as the factory units.....especially when they are cold. I would be willing to bet that everyone who had their cel pop up had it happen on a cold start up. Is it annoying...yeah but you can delete them with any cheap obd2 scanner you can find on ebay for $20. The Solo units have faired better then others but they are still high flow cats. Any custom tune should be able to turn the rear o2 sensors off that way you'll never run into that code again.
Catalyst System Efficiency Below Threshold Read more at: http://www.obd-codes.com/p0430 Copyright © OBD-Codes.com Catalyst System Efficiency Below Threshold Read more at: http://www.obd-codes.com/p0430 Copyright © OBD-Codes.com |
|
|
|
|
|
|
|
![]() |
|
|