Kenne Bell 3.6 Supercharger with extras - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Aecannon1 · 04-16-2013, 08:45 AM

Selling my 3.6 Kenne Bell Blower with extras. Selling the motor as well. Bought an Avalanche and an Aprilia RSV4.

PLUS...

- 8 Rib Belt and Pulley Upgrade with all accessory and drive pullies INCLUDING 10% overdrive supercharger harmonic balancer.

- 8 Mototron 80# Fuel Injectors for BIG power and safety

- Upgraded Aeromotive High Flow Fuel Rails (for up to 2000hp applications)

- Cold Air Intake

- ZR1 MAP sensor

- SCT Handheld tuner and Tune Files by BOTH SCT and HP Tuners

- 2 Blow off/Bypass Valves (stiff spring for motors with a cam, soft spring for motors without)

- ALL boost pulleys included (4", 3.75", 3.5", 3.25", 3", 2.75")

- Turnkey Performance 8 Rib Tensioner Kit with pullies (you will NEVER need to convert to the 10 rib setup, ever)

- ACT HDSS Clutch / SPEC Aluminum Flywheel

$4600 FIRM

PIC of the kit
http://flic.kr/p/dNMEcg

Contact me:
Aeric Cannon
(951)217-4534
Aecannon1@yahoo.com

I rarely check the thread so either PM me, text or email me. Thanks

DuhKoDuh · 05-15-2013, 08:15 AM

How much rwhp is the Kenne putting out?

Levischilz · 05-15-2013, 10:28 PM

Everything needed for setup included?

robi523 · 05-18-2013, 10:50 AM

hmm, has anyone heard anything from this guy? I emailed and texted, and no response... must not be interested in selling after all

214Chevelle · 05-20-2013, 12:05 PM

This sold on ebay. http://www.ebay.com/itm/181110938362...ht_3492wt_1171

robi523 · 05-20-2013, 07:38 PM

douche

04-16-2013, 08:45 AM	#1
Aecannon1 Drives: 2011 Camaro SS (RS Package) LS3 Join Date: May 2012 Location: Springfield, VA Posts: 114	Kenne Bell 3.6 Supercharger with extras Selling my 3.6 Kenne Bell Blower with extras. Selling the motor as well. Bought an Avalanche and an Aprilia RSV4. PLUS... - 8 Rib Belt and Pulley Upgrade with all accessory and drive pullies INCLUDING 10% overdrive supercharger harmonic balancer. - 8 Mototron 80# Fuel Injectors for BIG power and safety - Upgraded Aeromotive High Flow Fuel Rails (for up to 2000hp applications) - Cold Air Intake - ZR1 MAP sensor - SCT Handheld tuner and Tune Files by BOTH SCT and HP Tuners - 2 Blow off/Bypass Valves (stiff spring for motors with a cam, soft spring for motors without) - ALL boost pulleys included (4", 3.75", 3.5", 3.25", 3", 2.75") - Turnkey Performance 8 Rib Tensioner Kit with pullies (you will NEVER need to convert to the 10 rib setup, ever) - ACT HDSS Clutch / SPEC Aluminum Flywheel $4600 FIRM PIC of the kit http://flic.kr/p/dNMEcg Contact me: Aeric Cannon (951)217-4534 Aecannon1@yahoo.com I rarely check the thread so either PM me, text or email me. Thanks

05-15-2013, 08:15 AM	#2
DuhKoDuh Drives: 2011 Camaro 2SS/RS (Black) L99 Join Date: Aug 2010 Location: Pilot Point, Texas Posts: 2,187	How much rwhp is the Kenne putting out? __________________ Follow me on Instagram @C7Corvettes

05-20-2013, 12:05 PM	#5
214Chevelle Drives: 72 Chevelle Join Date: Jan 2013 Location: Texas Posts: 116	This sold on ebay. http://www.ebay.com/itm/181110938362...ht_3492wt_1171 __________________

05-15-2013, 10:28 PM	#3
Levischilz Drives: 2012 Camaro SS Transformers Edition Join Date: Apr 2013 Location: Denver Posts: 132	Everything needed for setup included?

05-18-2013, 10:50 AM	#4
robi523 Drives: 2010 SS, no mods yet Join Date: Sep 2011 Location: Philadelphia Posts: 76	hmm, has anyone heard anything from this guy? I emailed and texted, and no response... must not be interested in selling after all

05-20-2013, 07:38 PM	#6
robi523 Drives: 2010 SS, no mods yet Join Date: Sep 2011 Location: Philadelphia Posts: 76	douche