Hurst Shifter Bushing Poll...!!!!!!!! - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroCowboy · 03-27-2013, 10:35 AM

http://www.phastekperformance.com/20...st-bushing.htm

spd2612 · 03-27-2013, 11:08 AM

I had one shipped to me back in November and have issues again they are shipping another one
I am not sure if the ones I put in in November had the O rings or not....

Thapilot · 05-31-2013, 12:49 AM

Is Kenji no longer providing updates and working with the Hurst customers since Mustang doesn't have an issue anymore, or is everyone going to NH-SS, Phastek & other vendors for less problematic shifters? I canceled my MGW (back order) and went with Hurst, I'm second guessing my decision...almost to the point of regret because it appears that no one has the brass bushings available and there has been no more discussion of the race replacements.

I haven't installed my shifter and wont until there is an available solution...other than the obvious...going back to my first choice MGW.

Kenji · 06-13-2013, 07:25 PM

Thapilot - if your shifter was purchased within the past 2 years you should have no issues with the new material bushings. We have not had any reported failures. However, if you are still not satisfied with these new material bushings - the Hurst Extreme-Duty bushings have been available for a few months now: http://www.hurst-shifters.com/?wpsc-...ck-xd-bushings

The 2010 Sin · 06-14-2013, 08:42 PM

NH-SS bushing for the win. ITS A BEAST!

jmelchio · 01-14-2014, 04:47 PM

I had a short-throw shifter installed about two years ago, and it also has play in the shifter, and it's very noisy (both vibration and noise). I had it installed by a GM dealer with a performance shop, so I believe it was installed correctly. I love the shifter, but I'm worried that something isn't quite right. I brought it back to the installer about a year ago, and they said that the noise kit was installed, but it's still very loud. Are new bushings needed to prevent a failure in the future?

Sapper12b · 01-14-2014, 04:57 PM

Good thread with a lot of good questions

10aSSee D · 01-14-2014, 06:35 PM

The bushings that NH-SS made for a bunch of us work really well, there is no more slop in the shifter when it's in gear and feels a lot better. I don't have a noise issue or I can't hear it over my exhaust which is loud. Bushings are outstanding though.

MustangKiller · 01-14-2014, 06:36 PM

Yes there is an updated bushing

MustangKiller · 01-14-2014, 06:37 PM

Quote:

Originally Posted by jmelchio

I had a short-throw shifter installed about two years ago, and it also has play in the shifter, and it's very noisy (both vibration and noise). I had it installed by a GM dealer with a performance shop, so I believe it was installed correctly. I love the shifter, but I'm worried that something isn't quite right. I brought it back to the installer about a year ago, and they said that the noise kit was installed, but it's still very loud. Are new bushings needed to prevent a failure in the future?

Yea there is an updated bushing

MustangKiller · 01-14-2014, 06:41 PM

Quote:

Originally Posted by MustangKiller

7075444761 option 2 good luck

Try this number if u dont reach anyone let me know. Tell them you are after the updated bushings and they should take care of you!

MustangKiller · 01-14-2014, 06:51 PM

Quote:

Originally Posted by 10aSSee D

The bushings that NH-SS made for a bunch of us work really well, there is no more slop in the shifter when it's in gear and feels a lot better. I don't have a noise issue or I can't hear it over my exhaust which is loud. Bushings are outstanding though.

Hurst also offers a race bushing that in my opinion is better then the NH-SS bushing. I had one of the prototypes and really liked it.

jmelchio · 01-15-2014, 06:15 AM

Great, thanks for the info. I'll look into getting new bushings today.

jmelchio · 01-15-2014, 02:06 PM

Dohhh, NH-SS is out of stock. I'll check with Hurst today.

View Poll Results: Does your billet plus 2 have side too side play?
No it does not	7	17.50%
Yes but i have not replaced the bushing yet	22	55.00%
Yes i have and the bushing wore out in a short thime	8	20.00%
Yes i have and ive replaced it more then once	3	7.50%
Voters: 40. You may not vote on this poll

03-27-2013, 10:35 AM	#85
CamaroCowboy Drives: 2013 Chevy Truck Join Date: Mar 2010 Location: Copperas Cove, Texas Posts: 1,782 View My Garage	http://www.phastekperformance.com/20...st-bushing.htm __________________ Texas speed LT Headers and High Flow Cats, Magnaflow 3 inch cat-back Exhaust, SNL V2 Comp CAM, Texas Speed Underdrive Pully, G5CR CAI, Hurst Short Throw Shifter, JetFlo Mass Air Sensor, Custom Grill, Amber AAC Headlight and Fog Light Halo, Amber footwell Lighting, Amber under hood lighting, RK Sport Ram Air /Heat Extractor Hood and ADM Racing Scoop. 447.9 RWHP 428 TQ My car is exactly that, No one has to like it but me!

06-13-2013, 07:25 PM	#88
Kenji Drives: 2SS/RS M6 SW Join Date: Jan 2010 Location: SoCal Posts: 274 View My Garage	Thapilot - if your shifter was purchased within the past 2 years you should have no issues with the new material bushings. We have not had any reported failures. However, if you are still not satisfied with these new material bushings - the Hurst Extreme-Duty bushings have been available for a few months now: http://www.hurst-shifters.com/?wpsc-...ck-xd-bushings __________________

06-14-2013, 08:42 PM	#89
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	NH-SS bushing for the win. ITS A BEAST! __________________

01-14-2014, 04:47 PM	#90
jmelchio SSmokinJoe Drives: 2010 SIM 1SS/RS M6 Join Date: Feb 2010 Location: Pittsburgh, North Hills Posts: 568 View My Garage	I had a short-throw shifter installed about two years ago, and it also has play in the shifter, and it's very noisy (both vibration and noise). I had it installed by a GM dealer with a performance shop, so I believe it was installed correctly. I love the shifter, but I'm worried that something isn't quite right. I brought it back to the installer about a year ago, and they said that the noise kit was installed, but it's still very loud. Are new bushings needed to prevent a failure in the future? __________________ 1SS/RS Silver with Black Rally Stripes. 35% Tint Roto-Fab CAI SLP Loudmouth II Axleback Hurst Shifter R1Concepts Slotted Rotors Hawk Ceramic Brakepads I drive way too fast to worry about my cholesterol.

03-27-2013, 11:08 AM	#86
spd2612 Account Suspended Drives: Black SS2/RS LS3 Join Date: Jun 2011 Location: FT. Myers FL. Posts: 636 View My Garage	I had one shipped to me back in November and have issues again they are shipping another one I am not sure if the ones I put in in November had the O rings or not....

05-31-2013, 12:49 AM	#87
Thapilot Drives: 2010 2SS Black Twice Join Date: Dec 2011 Location: DFW Posts: 110	Is Kenji no longer providing updates and working with the Hurst customers since Mustang doesn't have an issue anymore, or is everyone going to NH-SS, Phastek & other vendors for less problematic shifters? I canceled my MGW (back order) and went with Hurst, I'm second guessing my decision...almost to the point of regret because it appears that no one has the brass bushings available and there has been no more discussion of the race replacements. I haven't installed my shifter and wont until there is an available solution...other than the obvious...going back to my first choice MGW.

01-14-2014, 04:57 PM	#91
Sapper12b HTCC Member Drives: 2013 Camaro SS Join Date: Dec 2012 Location: Houston, Texas Posts: 1,868 View My Garage	Good thread with a lot of good questions __________________

01-14-2014, 06:35 PM	#92
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	The bushings that NH-SS made for a bunch of us work really well, there is no more slop in the shifter when it's in gear and feels a lot better. I don't have a noise issue or I can't hear it over my exhaust which is loud. Bushings are outstanding though. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

01-14-2014, 06:36 PM	#93
MustangKiller Drives: 2013 2ss/rs A6 yellow !!!!! Join Date: Nov 2011 Location: Woodbine Maryland Posts: 659	Yes there is an updated bushing

01-15-2014, 06:15 AM	#97
jmelchio SSmokinJoe Drives: 2010 SIM 1SS/RS M6 Join Date: Feb 2010 Location: Pittsburgh, North Hills Posts: 568 View My Garage	Great, thanks for the info. I'll look into getting new bushings today. __________________ 1SS/RS Silver with Black Rally Stripes. 35% Tint Roto-Fab CAI SLP Loudmouth II Axleback Hurst Shifter R1Concepts Slotted Rotors Hawk Ceramic Brakepads I drive way too fast to worry about my cholesterol.

01-15-2014, 02:06 PM	#98
jmelchio SSmokinJoe Drives: 2010 SIM 1SS/RS M6 Join Date: Feb 2010 Location: Pittsburgh, North Hills Posts: 568 View My Garage	Dohhh, NH-SS is out of stock. I'll check with Hurst today. __________________ 1SS/RS Silver with Black Rally Stripes. 35% Tint Roto-Fab CAI SLP Loudmouth II Axleback Hurst Shifter R1Concepts Slotted Rotors Hawk Ceramic Brakepads I drive way too fast to worry about my cholesterol.