New SLP Style Splitter Install (cheap) - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Pckrfan795 · 05-28-2013, 12:31 AM

would this fit the v6?

whemming · 06-24-2013, 09:08 AM

Here is mine..Mine came with bolts but you need to add washers, they are a must.

ka1 · 06-24-2013, 09:24 AM

Just ordered one of these. Should be here by the end of the week and I will try and get it installed during the weekend. Any DIY's out there with step by step pics?

whemming · 06-24-2013, 09:49 AM

Quote:

Originally Posted by ka1

Just ordered one of these. Should be here by the end of the week and I will try and get it installed during the weekend. Any DIY's out there with step by step pics?

No unfortunately. But here is what I did:

1. Drill all the holes in the splitter (there are indention where the holes should be)
2. Then sand and paint the splitter (I just used plasti-dip)
3. Follow the SLP splitter instructions

Cool AirZ28 · 06-24-2013, 09:53 AM

will this fit 2013 models as well?

whemming · 06-24-2013, 09:58 AM

Quote:

Originally Posted by Cool AirZ28

will this fit 2013 models as well?

I don't think there is any difference with the 2013 fascia, so it should work. But you may want to check and make sure.

ka1 · 06-24-2013, 11:27 AM

Quote:

Originally Posted by whemming

No unfortunately. But here is what I did:

1. Drill all the holes in the splitter (there are indention where the holes should be)
2. Then sand and paint the splitter (I just used plasti-dip)
3. Follow the SLP splitter instructions

Cool!! yeah, I plan to use Plasti-Dip too. Just trying to figure out a way/place to spray it. Last couple of pieces I've done have been small so I could just put them in a box and spray em. I could lay out plastic but the dip sticks to the plastic.

I'm kind of a noob when it comes to painting parts if you couldn't tell.

ka1 · 06-24-2013, 12:32 PM

Quote:

Originally Posted by whemming

No unfortunately. But here is what I did:

1. Drill all the holes in the splitter (there are indention where the holes should be)
2. Then sand and paint the splitter (I just used plasti-dip)
3. Follow the SLP splitter instructions

Here they are for anyone who needs them.
http://marylandspeed.com/uploads/100039A.pdf

whemming · 06-24-2013, 03:40 PM

Quote:

Originally Posted by ka1

Cool!! yeah, I plan to use Plasti-Dip too. Just trying to figure out a way/place to spray it. Last couple of pieces I've done have been small so I could just put them in a box and spray em. I could lay out plastic but the dip sticks to the plastic.

I'm kind of a noob when it comes to painting parts if you couldn't tell.

I clamped mine to an old ladder outside and just sprayed away. Make sure you sand out any imperfections, and scuff it up real good. Then wipe it down good with alcohol before spraying. And if you screw up, just peel it off and try again!

nUcLeArEnVoY · 06-24-2013, 06:35 PM

Splitter looks amazing! I'm not too wild about how it needs to be painted, which is why I still think I'll go for the SLP one seeing as how it comes textured plastic and isn't meant to be painted.

USMCSSGT-RET · 06-24-2013, 07:00 PM

Looks good whemming.

ka1 · 06-24-2013, 07:44 PM

Quote:

Originally Posted by nUcLeArEnVoY

Splitter looks amazing! I'm not too wild about how it needs to be painted, which is why I still think I'll go for the SLP one seeing as how it comes textured plastic and isn't meant to be painted.

For the difference in price you could have it painted and still be cheaper. Or just use Plastic for about $7.

I got mine for $135. I haven't seen the SLP one under about $280

whemming · 06-25-2013, 11:42 AM

Quote:

Originally Posted by USMCSSGT-RET

Looks good whemming.

Thanks

camarostar2010 · 06-25-2013, 11:44 AM

I can say some times ebay works just as well as the name brand stuff. Looks great

06-24-2013, 09:08 AM	#16
whemming Drives: 2010 1SS/RS Join Date: Jul 2012 Location: Raleigh, NC Posts: 273 View My Garage	Here is mine..Mine came with bolts but you need to add washers, they are a must. __________________

06-24-2013, 09:53 AM	#19
Cool AirZ28 Drives: 2013 Black Camaro 2SS/RS Convert. Join Date: Jun 2013 Location: Sauk Village, Illinois Posts: 506 View My Garage	will this fit 2013 models as well? __________________ 2013 Camaro 2SS/RS-Smoked tail lights and side markers, HID log lights, & LED lighting inside/outside the car, SJM LED Cupholder, SJM full dashboard ABL lighting, ZL1 Rockers, 1LE Splitter, Showstopper LED Mirrors, Showstopper LED Side Markers, & Showstopper Heat Extractor Hood, 20" Niche Concourse ZL1 Styled wheels 20X8.5 & 20X10 with 275/40/20 & 315/35/20 Nitto Invos, Black Gorilla Lug Nuts/Locks, Black Billet Elite Camaro License Plate Holder, and Hydro Dipped Speedo/Shifter/AC-Heat Bezels.

06-24-2013, 07:00 PM	#25
USMCSSGT-RET Drives: '14 SIM 2LT/RS Vert Join Date: Aug 2010 Location: Concord, NC Posts: 1,412	Looks good whemming. __________________

05-28-2013, 12:31 AM	#15
Pckrfan795 Drives: 2021 Shadow Grey ZL1M6 Join Date: May 2012 Location: Katy, TX Posts: 384	would this fit the v6?

06-24-2013, 09:24 AM	#17
ka1 Drives: 2011 2SS Join Date: Jan 2013 Location: Central Florida Posts: 1,149	Just ordered one of these. Should be here by the end of the week and I will try and get it installed during the weekend. Any DIY's out there with step by step pics?

06-24-2013, 06:35 PM	#24
nUcLeArEnVoY Oldbie that nobody knows Drives: 2011 1SS/RS M6 Join Date: Jun 2008 Location: Homestead, FL Posts: 3,459 View My Garage	Splitter looks amazing! I'm not too wild about how it needs to be painted, which is why I still think I'll go for the SLP one seeing as how it comes textured plastic and isn't meant to be painted.

06-25-2013, 11:44 AM	#28
camarostar2010 Drives: 2011 SS Join Date: Nov 2011 Location: new jersey Posts: 379	I can say some times ebay works just as well as the name brand stuff. Looks great