09-25-2013, 02:04 PM | #1 |
Drives: 2013 F-150 Limited Join Date: May 2008
Location: Parker, CO
Posts: 2,191
|
Need opinions on the Drag Radial setup I'm thinking of for my ZL1
I've been doing some research today on the forums and think I have found the DR setup that might be the best bang for the buck for my ZL1.
After going to the track and having the stock Goodyears turn to mush after 2 runs I think this will be money will spent. Especially since I'm planning upgrades to the car next season (pulleys, CAI, injectors, TB, tune). I'm hoping to pick up another 80rwhp or so. The best run I had at Bandimere totally stock with stock tires was 12.9 @108 with a 1.9 60' (DA of 8500!). I'm hoping that just the DR's should be able to shave off .4-.6 from my ET. After 2 runs with 1.9 60' times everything after that was like 2.4-2.7 60' and like a full sec slower ET's. This would run me right around $1K total. Any thoughts on this setup? From what I've read everything on the wheel should clear just fine and the MT's are about as good as you can get for the price that will fit wheels we can run. ZR1 replica wheels in black 18x9.5 w/ 40mm offset from Factory Reproductions 1589540342 18X9.5 5X4.75 +40 2009 C6 ZR1 CORVETTE GLOSS BLACK WITH CAP http://www.factoryreproductions.com/...-Black-c89.htm Mickey Thompson ET Street II Drag Radials from Amazon of all places, gotta love Prime membership! (cheaper here than Summit or Jegs and I'd get them in 2 days) http://www.amazon.com/Mickey-Thompso...keywords=3786R
__________________
There just might be a 2016 Camaro or Corvette in my future...
_____________________________________________ Previous Chevy's 2013 Camaro ZL1 A6|SIM 2010 Camaro 2SS/RS|M6|CGM Exterior|Gray Int 2000 Camaro SS|M6|SLP headers|SLP center mounted quad exhaust|Magnaflow muffler|Hypertech programmed 2001 Corvette|M6|LG Motorsports Headers|Corsa Touring Cat-back|Magnaflow X Pipe|Hurst short-throw|Dyno tuned |
09-25-2013, 02:07 PM | #2 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
I would only say what are you waiting for!!!
|
09-25-2013, 02:36 PM | #3 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
Same set up I'm running except I have Z06 rims for rears.
|
09-25-2013, 02:39 PM | #4 |
Drives: 2013 F-150 Limited Join Date: May 2008
Location: Parker, CO
Posts: 2,191
|
Approval from the wife LOL
Great times for your ride, what tires are you getting those 1.45 60' with? slicks? Looks like I'm on the right track so far!
__________________
There just might be a 2016 Camaro or Corvette in my future...
_____________________________________________ Previous Chevy's 2013 Camaro ZL1 A6|SIM 2010 Camaro 2SS/RS|M6|CGM Exterior|Gray Int 2000 Camaro SS|M6|SLP headers|SLP center mounted quad exhaust|Magnaflow muffler|Hypertech programmed 2001 Corvette|M6|LG Motorsports Headers|Corsa Touring Cat-back|Magnaflow X Pipe|Hurst short-throw|Dyno tuned |
09-25-2013, 03:23 PM | #5 |
|
Yes, a very good set-up. Sending you a PM too.....
|
09-25-2013, 07:19 PM | #6 |
Drives: Camaro ZL1 Join Date: Aug 2012
Location: CA
Posts: 1,130
|
Would these be fine to run with the stock zl1 wheels in the front?
__________________
-2013 Camaro ZL1-Black Stripe Package-Ambient Light Kit-Subwoofer Package-Sunroof-Suede Package-NAV MYLINK-MANUAL BABY-Dual Vented Fenders-Exposed Carbon Fiber Insert
-Black 10 Spoke Wheels 604 RWHP 602 LBS/TQ |
09-25-2013, 07:42 PM | #7 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
|
09-25-2013, 07:59 PM | #8 | |
Drives: 2013 F-150 Limited Join Date: May 2008
Location: Parker, CO
Posts: 2,191
|
Quote:
__________________
There just might be a 2016 Camaro or Corvette in my future...
_____________________________________________ Previous Chevy's 2013 Camaro ZL1 A6|SIM 2010 Camaro 2SS/RS|M6|CGM Exterior|Gray Int 2000 Camaro SS|M6|SLP headers|SLP center mounted quad exhaust|Magnaflow muffler|Hypertech programmed 2001 Corvette|M6|LG Motorsports Headers|Corsa Touring Cat-back|Magnaflow X Pipe|Hurst short-throw|Dyno tuned |
|
09-25-2013, 10:46 PM | #9 |
Drives: 08 G6 GXP Join Date: Jul 2012
Location: Windsor, Ontario
Posts: 50
|
|
09-26-2013, 10:39 AM | #10 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
I don't think the OP, nor the person I quoted, were going to run these on the front of the car. These would be perfect wheels for a set of drag radials to use at the track.
I'm also not sure what you mean when you say sizes are limited on 18's.....check out tirerack.com or discounttiredirect.com......there are LOTS of 18" tires? |
09-26-2013, 11:00 AM | #11 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,221
|
I run those rims front and back but it takes work to fit them up front.
Sent from my iPhone using Tapatalk - now Free
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
09-26-2013, 12:38 PM | #12 |
DBLCHBY III
Drives: 15 1LE Join Date: Jun 2011
Location: Team Canada
Posts: 2,789
|
race star industries rims and MTs 18' on back 17' on front
__________________
|
09-26-2013, 01:08 PM | #13 | |
Drives: 2013 Camaro ZL1, 2004 Subaru STI Join Date: Sep 2013
Location: Washougal, WA
Posts: 1
|
Quote:
What fitment issues did you run into? I am assuming this is your winter tire setup. I am looking to do the same and don't want to roll my fenders or anything. Thanks |
|
09-26-2013, 01:23 PM | #14 | |
Drives: 2013 F-150 Limited Join Date: May 2008
Location: Parker, CO
Posts: 2,191
|
Quote:
Do you drive them much on the street or swap out rims/tires at the track?
__________________
There just might be a 2016 Camaro or Corvette in my future...
_____________________________________________ Previous Chevy's 2013 Camaro ZL1 A6|SIM 2010 Camaro 2SS/RS|M6|CGM Exterior|Gray Int 2000 Camaro SS|M6|SLP headers|SLP center mounted quad exhaust|Magnaflow muffler|Hypertech programmed 2001 Corvette|M6|LG Motorsports Headers|Corsa Touring Cat-back|Magnaflow X Pipe|Hurst short-throw|Dyno tuned |
|
|
|
|
|