11-12-2013, 05:54 PM | #43 |
Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010
Location: plainfield, IL
Posts: 2,706
|
Ya I had no interest in new cars until the 5th gen came out! I was right at home with my 70 cutlass! And I am pretty young on top of it, but newer stuff has been so lame until the last few years! These camaros remind me of having a real muscle car but with new car comfort.
__________________
10.91 at 122 H/C stock block N/A
|
11-19-2013, 10:57 AM | #44 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
Hey Mike when you removed the front sway bar were you able to snake it out with a wheel off the car? Looks like it would be easier to do on a lift?
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
11-20-2013, 07:47 AM | #45 |
Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010
Location: plainfield, IL
Posts: 2,706
|
Yes but the tire has to be off, I pulled it out from the driver side.
__________________
10.91 at 122 H/C stock block N/A
|
11-20-2013, 10:59 AM | #46 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
Yeah that's what I gleaned from doing a little searching... Adding that to the list.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
11-20-2013, 01:35 PM | #47 |
Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010
Location: plainfield, IL
Posts: 2,706
|
Been driving mine everyday without it, I actually like it better! I was looking at some old school impala's and caprice's online today. Getting some ideas for a sweet cruiser... Just need more money lol. One toy is just not enough
__________________
10.91 at 122 H/C stock block N/A
|
11-20-2013, 01:43 PM | #48 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
Yeah I cruise the Mercury here and there in good weather... Has a cammed SBC, TH350, 8.5 10 bolt it can do 90mph no problem.
I bought a new diff, just the 'posi,' now looking for gear. Going to get 3.91 unless awesome deal on 3.70 falls in my lap. Going to pull the trigger here pretty soon for valves for a set of new bare castings I have, and then send them out for porting. Cam will get ordered over the winter too, plan to stay VVT so I will also need pushrods and a set of lifters (which ones?).
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
|
|
|
|