help decide door insert color AMG - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

seven · 09-23-2014, 09:25 PM

Hey I want to replace the material door panel inserts and the dash insert with painted ones. I do not have ABL as it is a 1LT. Should I do Ashen Grey Metallic or contrast it with the silver(not sure if it would be too off)? Has anyone used a good place to find these?

redjerry · 09-27-2014, 08:35 PM

I have my old set of silver door panels. I was trying to sell them to a dude here last week, but he never got back to me after i got him a shipping quote. Most guys want an arm and a leg for these panels. New or used. Im looking for $150, which is cheap, plus shipping to whatever your zip code is. Using UPS btw. I have the ABL's, (of course I transfered them over with my new body colored panels) so you could always add lights down the road. Now if you have done any research, you will need 15 little screws for each door panel. The panels are held in by a bunch of little plastic posts that they melted down to act as rivets. Just use a dremmel or whatever to grind them free. They are hollow in the center and little screws will be needed to hold any new panels in place. There are plenty of threads in here on what screws you need, plus on what parts you can buy to add ABL's. If you want picks of my panels let me know.

09-23-2014, 09:25 PM	#1
seven Drives: 2015 Camaro RS 2LT AGM Join Date: Aug 2014 Location: Florida Posts: 672	help decide door insert color AMG Hey I want to replace the material door panel inserts and the dash insert with painted ones. I do not have ABL as it is a 1LT. Should I do Ashen Grey Metallic or contrast it with the silver(not sure if it would be too off)? Has anyone used a good place to find these? __________________ 2015 RS Camaro 2LT with Sunroof, Performance Exhaust, Ground Effects, Tinted Windows, LED Fog Lights(DD), CAI Cold Air Intake, Ghosted Side Markers(Showstopper), Elite Catch Can, Xpel & SunTek PPF, Replica Z28 High Wing Spoiler, ZL1 Replica Wheels(Satin Black Factory Reproductions)

09-27-2014, 08:35 PM	#2
redjerry Drives: 2012 2SS/LS3 Join Date: May 2012 Location: Pennsylvania Posts: 29 View My Garage	door panels I have my old set of silver door panels. I was trying to sell them to a dude here last week, but he never got back to me after i got him a shipping quote. Most guys want an arm and a leg for these panels. New or used. Im looking for $150, which is cheap, plus shipping to whatever your zip code is. Using UPS btw. I have the ABL's, (of course I transfered them over with my new body colored panels) so you could always add lights down the road. Now if you have done any research, you will need 15 little screws for each door panel. The panels are held in by a bunch of little plastic posts that they melted down to act as rivets. Just use a dremmel or whatever to grind them free. They are hollow in the center and little screws will be needed to hold any new panels in place. There are plenty of threads in here on what screws you need, plus on what parts you can buy to add ABL's. If you want picks of my panels let me know.