You are browsing camaro5 
 |
|
01-16-2015, 06:53 PM
|
#1 |
 Drives: 2015 z28 sold Join Date: Dec 2014
Location: As
Posts: 80
|
Check schrader valves before hittin the track
I wasn doin final tech before my first day at the track with the Z28
Found two out of the four schrader valves to be loose..one was leaking air as soon as i removed the valve stem cap to check tire pressure, Figure i'd give you guys a heads up. |
|
|
|
01-17-2015, 12:19 PM
|
#2 | |
 Drives: 2015 Z28, 2014 RS7,2014 RR Sport Join Date: Nov 2014
Location: Auburn, Al
Posts: 5
|
Quote:
|
|
|
|
|
|
01-17-2015, 04:25 PM
|
#3 |
|
Jumanji
Drives: '14 Z/28 - AGM - No A/C Join Date: Mar 2014
Location: Alaska
Posts: 1,693
|
Well, looks like I'll pick up a valve tool tomorrow. Not something I already own so it'll be cheap insurance for sure.
|
|
|
|
|
01-17-2015, 04:46 PM
|
#4 |
|
Runs with scissors...
Drives: '14 Z/28s SIM/SW Join Date: Jan 2013
Location: Austin, TX
Posts: 1,446
|
I had the same issue during a track day. Got ready to start a session, and one tire was down below 15 psi. These cars seem sensitive to this, for some reason; I've never had this happen on any other car I've owned...
__________________
 |
|
|
|
|
|
|
|
 |
|
|
