![]() |
|
|
#57 |
|
U.S. Army Veteran
Drives: 2LT/RS SGM M6 Polished 20's Join Date: Mar 2011
Location: Bloomsburg, PA
Posts: 795
|
Respectfully dear Sir, you have obviously not tried it.
|
|
|
|
|
|
#58 | |
|
WHAT RED LIGHT?!
Drives: 2011 Black Camaro 2SS/RS M6 Join Date: Apr 2011
Location: Miami, Florida
Posts: 1,115
|
Quote:
__________________
2011 2SS/RS M6 BLACK - VARARAM NO TUNE INTAKE, MODDED AND PORTED TB, PORTED INTAKE MANIFOLD, VITESSE THROTTLE CONTROLLER, DOUG THORLEY LT'S, CATLESS, X-PIPE, 25" STAINLESS WORKS RETRO CHAMBERED MUFFLERS, CUSTOM 2.5" MANDREL BENT EXHAUST, RICHMOND 4.10 GEARS, CUSTOM CAM (231/242 @ 114LSA), MUSTANG DYNO TUNED BY TORQ, 20% CERAMIC TINTS, EIBACH PROKIT SPRINGS 1" DROP, HAWK PERFORMANCE CERAMIC BRAKES, NITTO INVO TIRES, HYDROCARBON TAIL LIGHT AND FOG LIGHT BEZELS BY EMBLEMPROS, METRA DASH KIT, JVC KW-AV71BT, PHOENIX GOLD iAMP GM1, PASSPORT QI45 - 450 RWHP 415 RWTQ
![]() |
|
|
|
|
|
|
#59 |
![]() ![]() Drives: 1969 Z28, 1982 Z28, 2014 SS/RS/1LE Join Date: Nov 2013
Location: Michigan
Posts: 886
|
I also took mine off. I have headers, HF cats, CAI with scoop, and Bo White Ported TB. Car was running fine with no codes. I put the VTC on and took one short drive...wow, what a blast! It makes a very noticeable change in the pedal! But a few days later I went for a longer drive. It was fine most of the drive, but suddenly it kept throwing me into reduced power mode. DTC P1516. This means ECU is reading different actual throttle position than pedal position. This tells me the feedback from the VTC is confusing the ECM. I took the VTC out and have driven the car several times with no problem. I have had the battery unhooked for a couple days. Going to install the VTC and then hook up battery and reprogram the VTC. Hoping that works because I do want to use it. If it goes into limp mode again, I will leave it off the car.
For those saying it does nothing, you just push the pedal, you are flat wrong. Don't ever judge until you try it yourself. I was skeptical... But was pleasantly surprised! Hoping my ECM reset works and I can use it. |
|
|
|
|
|
#60 |
|
BUMBL Z
|
You'll have a really nasty permagrin, especially with the higher sport settings
__________________
Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP
Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
|
|
|
|
#61 | |
|
HT5 in the 626
Drives: 2014 Camaro 2SS/RS Join Date: Nov 2013
Location: 626, California
Posts: 757
|
Quote:
All this product does is remove that really really annoying deadspot in the pedal that you can't tune out. Before the mod, my pedal had a soft spot which did not really move the car leading me to have to push down harder and sometimes putting too much gas making the ride uncomfortable. Now the throttle is LINEAR. How much I put my foot down is exactly how much I get out. My fuel economy was 12.4 mpg on average now it is 13.1. All said and done, this product is amazing. |
|
|
|
|
|
|
#62 |
![]() ![]() Drives: 2015 2SS/RS/1LE Join Date: Feb 2015
Location: Tucson
Posts: 866
|
I don't know if anyone here knows what 'exponential' is, in relation to input vs output of potentiometers. I have a lifetime of experience with radio control hobby stuff (planes, cars, helis, etc). We use 'expo' to soften the feel of the aircraft around neutral around all the controls. It's great for precise control, but sometimes too much expo makes the control seem sluggish. Essentially, it feels to me like 'expo' is exactly what is programmed into the throttle control system, and IMO it's too much expo for when you want the car to feel more 'lively'.
The Vitesse basically allows you to program the expo out of the system, or so it seems to me. Those that say they know how to mash the throttle, don't get it. No matter how fast you floor it, the initial response of the butterfly is going to be slower than the rate that you mashed the pedal. The result is less 'slam your head back' feel. With the Vitesse installed and programmed SP5 or above, the change in throttle response is REAL and NOTICEABLE. Does it make the car quicker or faster? It sure feels quicker, and 0-60 times have been documented to have improved for some people. It doesn't make the car faster, but for me it sure does make for a funner ride!
__________________
2015 SS/RS/1LE
HSA delete, VMAX throttle body, CAI inc. Intake, PRC255 heads, BTR 660 springs, BTR cryo-treated rockers, PAT G 232/240 .654/.626 110+2, johnson 2110's, Manton 502 pushrods, C5R, Melling high volume/high pressure, Powerbond 25% underdrive pulley, Proform covers, Kooks stepped headers, catless mids, Doug Thorley exhaust. 512rwhp, 446rwtq on a mustang dyno, tuned by Cunningham motorsports. |
|
|
|
|
|
#63 |
![]() Drives: 2014 SS 1LE Join Date: Apr 2014
Location: United States
Posts: 660
|
Haven't tried this yet but am going to order one for my '14 SS. Although the couple guys in here having issues kind of concerns me. But it looks like the common denominator with them is ported TB.
|
|
|
|
|
|
#64 |
![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro 2SS/RS Join Date: Dec 2009
Location: Grand Prairie, Texas
Posts: 1,609
|
I had a ported tb on mine, and I put about 1600 miles on it with the vtc. I then switched back to my stock one. I noticed a slight difference in Throttle response, and the car was not as jumpy on takeoff.
If you don't have either I would buy the VTC 1st.
__________________
94 Firebird Formula (Drowned 08/30/05)
2010 IBM 2SS/RS 6M Arrived 3/25/10. ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, 1LE Shocks, Hotchkis Sway Bars, Whiteline Cradle Bushing Inserts, Custom Powdercoated ZL1's ,Michelin Pilot Supersports, Stainless Power Headers, Solo J Pipes, AAC LED Sidemarkers, ZL1 Rockers, SLP Splitter, ADM Stage II Cam,ZL1 Diffuser,Vitesse Throttle Controller. |
|
|
|
|
|
#65 |
![]() ![]() Drives: 2015 2SS/RS/1LE Join Date: Feb 2015
Location: Tucson
Posts: 866
|
Interesting. I'll be installing a vmax tb along with CAI. I'll report back if I encounter issues. I'm hoping not, because I truly think that the vitesse offers a feel of 'kick' that I really only think the authentic feel comes with intake, cam, and exhaust. Of course the latter is better, but the vitesse sure makes the car 'feel' like there's more mods to the motor than just 0's and 1's...
__________________
2015 SS/RS/1LE
HSA delete, VMAX throttle body, CAI inc. Intake, PRC255 heads, BTR 660 springs, BTR cryo-treated rockers, PAT G 232/240 .654/.626 110+2, johnson 2110's, Manton 502 pushrods, C5R, Melling high volume/high pressure, Powerbond 25% underdrive pulley, Proform covers, Kooks stepped headers, catless mids, Doug Thorley exhaust. 512rwhp, 446rwtq on a mustang dyno, tuned by Cunningham motorsports. |
|
|
|
|
|
|
|
![]() |
|
|