![]() |
|
|
#1 |
|
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
Anyone detail outside under a Canopy?
what size canopy do you have? Make? been looking at EZ up possibly a 12 x 12. is that big enough? don't have room in the garage to manuever around.
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
|
|
|
|
|
#2 |
|
Obsessed
Drives: 2016 Hyper Blue 2SS RS Join Date: Jun 2011
Location: Riverview, FL
Posts: 2,606
|
You could probably move it closer to one side as needed to keep the sun out (unless directly overhead)
I think it would work. Not enough room in my parking lot to do this, I have to drive into my work and use the bays when they are empty. Jim
__________________
2016 Hyper Blue 2SS |
|
|
|
|
|
#3 |
|
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
I have read on some other boards about using a tarp connected with a couple bungy's to provide further shading. I took the tape measure out and measured the area that I would like to set it up in and the 12 X 12 would allow me just under three feet clearance to work in and that I believe would work pretty well. this is something that I would use 2-3 times a year for detailing and also would be nice to have for cook outs. always fighting the sun late in the mornings on week ends when I want to buff out the clear coat and decided I needed to get one of these canopies that is an EZ up style. think I know what I want now got to wait for a good deal
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() Drives: 1968 Coupe, 2010 2SS, 2011 2SS/RS Join Date: Oct 2011
Location: WIsconsin
Posts: 1,252
|
12x12 will work but if it's a windy day, be sure to weigh it down if your can otherwise it's going right into your paint. Yea, found out the hard way.
__________________
|
|
|
|
|
|
#5 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
![]() Great heads up for the OP though. I have to do my polishing on my car outside, I must admit when I do someone else's (I will only do it if they have a garage) I get a little jealous. I have a huge canopy though. Mostly cloudy with no chance of rain!
__________________
Roto-Fab intake, SW 1 7/8" LT w/hi flow cats, Flowmaster outlaw exhaust, UDP, 160* stat, Circle D 3200, Moroso catch can, TCI line lock, Zex Nitrous 125 shot, 3.91 gear, Eaton True-trac, DSS 1000hp axles. |
|
|
|
|
|
|
#6 |
|
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
detailed outside today, got up at dawn and got the car polished about an hour in to the sun beating down on me, took a break til the sun got past the house and finally got it finished. definitely getting one by next spring. don't want to give myself heat stroke...LOL.
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint Last edited by jshaf; 09-28-2015 at 07:41 PM. |
|
|
|
|
|
#7 |
![]() Drives: 2015 Camaro 1SS RS Join Date: Feb 2015
Location: South Florida
Posts: 300
|
I use a 10X10 that I picked up at Dicks Sporting Goods cheap.
Here's a tip that only cost $4 and can save your paint from scratches ! Go to the Dollar Store and pick up 4 foam pool noodles ![]() With a razor blade, make a slit along the whole length noodle and slide it on each leg of the canopy, easy on easy off
__________________
2015 Camaro 1SS/RS Blue Velvet Metallic, L99, Airaid Intake Tube, Akebono Ceramic Brake Pads, Borla S-Type Axle Back, GM Strut Tower Brace, Range Device
|
|
|
|
|
|
#8 | |
|
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
Quote:
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
|
|
|
|
|
|
|
|
![]() |
|
|