12-31-2015, 12:25 PM | #1 | |
Drives: 93GMC sierra stepside/ ctsv3 Join Date: Dec 2011
Location: San Antonio, Texas
Posts: 914
|
Fully built 2012 Camaro IOM price drop
Ive decided to sell my Camaro, I have put a lot of time into this car and when you see it.. it shows.
The car has almost 13k miles on it right now and only almost 3k miles on the new fully built motor, below is the list of modifications I have done yo the car TMS ( Thompson Motor Sports ) LSX 418 c.i. 10.1 compression Rated For 1500hp 4.000'' crankshaft Thompson motorsports 6.125" connection rods Diamond Pistons Performance file fit ring set King racing narrowed rod &main bearings GMPP cam Bearings Arp main studs Arp head bolts Melling high pressure oil pump Prc 260 6 bolt heads with ls9 head gaskets Brian Tooley rocker Arm Turnion Upgrade Brian Tooley Pushrods C5 R timing chain ls2 chain dampener Custom Ground Turbo Cam 235*-244*-118 +4* .638” .622” Stock ls3 intake with Nasty Nate Fuel rails 129lbs Fuel injectors Lokar Oil dip stick Mcload RXT clutch with remote bleeder Ideal Garage modified clutch slave cylinder MGW Full replacement shifter with 2013+ shift knob Improved Racing Dynamics 180degree oil cooler block with added Mishimoto 19 row aluminum oil cooler Fore Innovation Level 4 dual fuel system ( 2 Walbro 450's ) with -8an feed and -10 return fuel lines and reusable fuel filter DeWitt's high performance aluminum direct fit radiator RX color matched catch can Pro Sport A/F and Boost gauge with pillar pod Poly motor mounts Texas speed 2 inch into 3inch long tube headers Kooks full 3 inch exhaust header back no cats Pedders supercar coil overs Pedders steering rack bushings Pedders radius rod bushings Pfadt trailing arms Pfadt Solid rear sub frame bushings JP Superior Solutions rear sway bar ZL1 Front 6 piston Brembo brakes ( front and rear calipers have been professionally powder coated ) Gforce engineering 1320 bolt in 9inch irs kit Forgeline 3 piece GX3 20" Rims 275 front Nitto Invo's 315 rear Nitto Nt05's Oem ZL1 hood with painted carbon fiber insert Daytime driving lights have been replaced with projector sytle to match the headlights and added 5k hid's from Diode Dynamics Color match bowties and tail light bezels Sequential LED Rear Lamps with Rapid Fire and Afterburner Also under the hood as been completely wire tucked and cleaned, I was planning on doing a custom top mount twin turbo setup, ecu and fuse box has all been safely relocated under the cowl by the cabin air filter area. The engine harness has also been modified, originally it would run from the back of the passenger side down to the front of the engine and cross over to the drivers side and run back down.. To clean it up I made the harness run from the back and both sides run down to the front to keep the loom form crossing the front of the engine bay to give it a nice clean appearance. When the original motor was removed the ac system stayed in the car so the factory freon did not escape the system and the ac is still as cold as it was when I bought the car Car has been Tuned and everything went over by JMS after engine install and wire tucked it was dyno tuned and made 505whp The car has been a weekend or once a week to work car, I built the car to take it to the strip but never taken it. the car has been well taken care of, looks and smell brand new inside and out.. Always been in a garage with a car cover when not being driven, I wipe it down every time I drive it and never leave it setting dirty also never been purposely driven in the rain but I have been caught in the rain once or twice. Not looking for trades and I am not hurting so it don't haft to be sold. Price is negotiable, No joyrides If you have any question or want more pictures ( I have a ton ) feel free to PM or text me if you are serious about purchasing. 40k Last edited by 2012InfernoSS; 07-17-2016 at 09:46 AM. Reason: Forgot price |
|
01-01-2016, 02:03 PM | #2 |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
Damn dude, this is a seriously good deal for someone that wants to have a 1300 wheel Camaro. Just add a Turbo kit and have it tuned...
Sent from my iPhone
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
01-01-2016, 05:52 PM | #3 |
Account Suspended
Drives: 2010 2SS/RS Join Date: Jun 2009
Location: Texas
Posts: 3,418
|
If only my engine bay looked that clean. Car looks awesome
|
01-01-2016, 10:18 PM | #4 |
Drives: 2016 2lt RS Join Date: Oct 2015
Location: Dallas, Texas
Posts: 110
|
nice ride boss ... good luck with your sale
|
01-02-2016, 12:53 AM | #5 |
Drives: 93GMC sierra stepside/ ctsv3 Join Date: Dec 2011
Location: San Antonio, Texas
Posts: 914
|
Thanks guys
Sent from my ONE A2005 using Tapatalk |
01-11-2016, 11:37 AM | #6 |
Drives: 93GMC sierra stepside/ ctsv3 Join Date: Dec 2011
Location: San Antonio, Texas
Posts: 914
|
Ttt
Sent from my ONE A2005 using Tapatalk |
01-25-2016, 03:22 PM | #7 |
Drives: 93GMC sierra stepside/ ctsv3 Join Date: Dec 2011
Location: San Antonio, Texas
Posts: 914
|
BUMP
|
01-28-2016, 01:17 PM | #8 |
|
that is a beauty!!! good luck with your sale buddy.
__________________
|
01-28-2016, 10:53 PM | #9 |
Drives: 13' BRM ZL1 A6 Join Date: Dec 2011
Location: Abilene, Tx
Posts: 231
|
Still for sale?
|
03-27-2016, 07:39 AM | #10 |
Drives: 93GMC sierra stepside/ ctsv3 Join Date: Dec 2011
Location: San Antonio, Texas
Posts: 914
|
Price drop
|
04-23-2016, 12:41 PM | #11 |
Drives: 93GMC sierra stepside/ ctsv3 Join Date: Dec 2011
Location: San Antonio, Texas
Posts: 914
|
ttt
|
04-28-2016, 12:15 PM | #12 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
Just curious, what wicker bill is that?
Nice car.
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
06-15-2016, 02:19 PM | #13 |
Drives: 93GMC sierra stepside/ ctsv3 Join Date: Dec 2011
Location: San Antonio, Texas
Posts: 914
|
To the Top
|
07-17-2016, 09:44 AM | #14 |
Drives: 93GMC sierra stepside/ ctsv3 Join Date: Dec 2011
Location: San Antonio, Texas
Posts: 914
|
TTT,
Needs nothing but boost to make reliable 1000whp |
|
|
|
|