SS Emblems help - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DragRacerX · 06-15-2017, 03:08 PM

I get all of mine from eBay for around $30. Search for "SS Front Grille Emblem"

G701LE · 06-15-2017, 07:27 PM

Guess I'll go the '69 route. I like those better anyway. I will just paint the white part.....

Are the posts long enough to go through the grill???

justjoshin · 06-15-2017, 09:42 PM

Quote:

Originally Posted by G701LE

Guess I'll go the '69 route. I like those better anyway. I will just paint the white part.....

Are the posts long enough to go through the grill???

I had mine on the heritage grill. I would suggest the SLP for your geill

8balldeluxe · 06-16-2017, 12:51 AM

Old school emblems are cool as well

BDG45A · 06-22-2017, 03:11 PM

You can go to Ebay and enter "Chevy SS emblem" and you'll get a couple of hundred different sellers with a variety of styles ranging from $25 each to over $100. I did the old school style because they are larger. You'll have to do a little bending on the attach straps to work with the 5th gen grille, but it wasn't a big deal to make it work. The front emblem still wasn't big enough to cover the bow tie area on the grille so I bought a "Bow Tie Delete" for $35. As others have noted, you cut the studs off for the trunk emblem and grind it down flush. Buy some 3M double sided molding tape and put it in the recess areas of the emblem. Clean the area your sticking it on (emblem and car) really well to remove any grease or wax and press it in place. I've had mine on for over a year, no problems. So you can get it done for about $100.

TheFlyingBananaSS · 07-01-2017, 09:29 PM

Quote:

Originally Posted by lionssfan

Heres what i have if interested. The front emblem needs repainting.

Where did you get that rear SS emblem from?

lionssfan · 07-02-2017, 01:35 AM

[QUOTE=TheFlyingBananaSS;9799076]Where did you get that rear SS emblem from?[/QUO

Mine were made by SLP. I'm not sure if they make these anymore. I couldn't find any onliine. I just removed mine and went to a painted black bowtie. I could sell mine if your interested. These are in excellent shape. The adhesive on the back needs replacing.

camguynj · 07-02-2017, 06:18 AM

[QUOTE=lionssfan;9799318]

Quote:

Originally Posted by TheFlyingBananaSS

Where did you get that rear SS emblem from?[/QUO

Mine were made by SLP. I'm not sure if they make these anymore. I couldn't find any onliine. I just removed mine and went to a painted black bowtie. I could sell mine if your interested. These are in excellent shape. The adhesive on the back needs replacing.

On EBAY

http://www.ebay.com/itm/SLP-2010-201...FVL-Lm&vxp=mtr

TX_ED_SS · 07-10-2017, 06:49 AM

[QUOTE=camguynj;9799376]

Quote:

Originally Posted by lionssfan

On EBAY

http://www.ebay.com/itm/SLP-2010-201...FVL-Lm&vxp=mtr

Good find! SLP doesn't make these kits any longer. I picked mine up from them when I first got my car.

G701LE · 07-31-2017, 05:44 PM

Quote:

Originally Posted by BDG45A

You can go to Ebay and enter "Chevy SS emblem" and you'll get a couple of hundred different sellers with a variety of styles ranging from $25 each to over $100. I did the old school style because they are larger. You'll have to do a little bending on the attach straps to work with the 5th gen grille, but it wasn't a big deal to make it work. The front emblem still wasn't big enough to cover the bow tie area on the grille so I bought a "Bow Tie Delete" for $35. As others have noted, you cut the studs off for the trunk emblem and grind it down flush. Buy some 3M double sided molding tape and put it in the recess areas of the emblem. Clean the area your sticking it on (emblem and car) really well to remove any grease or wax and press it in place. I've had mine on for over a year, no problems. So you can get it done for about $100.

Ok. I bought a '69 SS emblem for the front bumper and a bowtie delete thing. How are you guys mounting the emblems with the delete on? The posts aren't long enough to put the mounting bracket on

TX_ED_SS · 08-01-2017, 09:07 PM

Quote:

Originally Posted by G701LE

Ok. I bought a '69 SS emblem for the front bumper and a bowtie delete thing. How are you guys mounting the emblems with the delete on? The posts aren't long enough to put the mounting bracket on

I'm not sure what your bowtie delete looks like but I know some guys have cut the pins off the back of the 69 emblem and used 3m double sided tape to mount them. As mentioned before, you may have to bend the emblem a bit then trim the tape.

Sent from my iPhone using Tapatalk

lionssfan · 08-01-2017, 11:44 PM

Here's what I have and fabricated on my 2010 heritage grill. I made small brackets and secured with a pale nuts. The SS posts on the emblem can be cut for the stock grill. I'm selling my front and rear SS and going back to the bowtie look.

blake-b · 08-02-2017, 12:19 AM

Quote:

Originally Posted by lionssfan

Here's what I have and fabricated on my 2010 heritage grill. I made small brackets and secured with a pale nuts. The SS posts on the emblem can be cut for the stock grill. I'm selling my front and rear SS and going back to the bowtie look.

That is almost exactly how my fronts are. The posts share a single bar behind them. The rears have the posts cut off and, as mentioned previously, using 3M type to hold them on.

G701LE · 08-02-2017, 01:14 AM

I just bought an SLP kit off EBay. I will use the '69 one for the rear. Thanks for the help! I still can't picture how you got the pins through the grill. The only way I could see is drilling through the bowtie delete. Otherwise, it either sat too high, or too low in the grill.

06-15-2017, 03:08 PM	#15
DragRacerX Drives: 2017 ZL1 A10 HBM & 2012 2SS M6 IBM Join Date: Jul 2009 Location: Dallas, GA Posts: 267 View My Garage	I get all of mine from eBay for around $30. Search for "SS Front Grille Emblem" __________________ 2017 ZL1 Hyper Blue Metallic, A10 Trans, CF Hood, NAV, PDR, Sunroof, aFe Momentum GT CAI, Vmax Motorsports TB, ARH LT CAV8-16200300FSQWC (Daily Driver) 576 RWHP/575 RWTQ 2012 2SS/RS IBM Technostalgia LED taillights, Magnuson TVS2300 & 3.40 Pulley, Vengeance Racing VRPD-2 Cam Kit, ZL1 Fuel Pump, Injector Dynamics ID850 Injectors, Forced Induction Interchiller, Cold Air Inductions CAI, BBK 40210 LT Headers & Free Flow Cats, MBRP S7022409 T409-Stainless Steel 3" Dual Cat Back Exhaust System, Lingenfelter ZR1 Dual Disc Clutch Kit, ZL1 Brake Kit Rotors & Calipers 628 RWHP/596 RWTQ / A.C.E.5

06-15-2017, 07:27 PM	#16
G701LE Drives: 2010 2SS/RS L99 IBM silver stipes Join Date: Dec 2015 Location: K.C. Kansas Posts: 1,329 View My Garage	Guess I'll go the '69 route. I like those better anyway. I will just paint the white part..... Are the posts long enough to go through the grill??? __________________ 2010 Imperial Blue w/ Silver stripes 2SS/RS L99 Mods = Not enough....

06-16-2017, 12:51 AM	#18
8balldeluxe Drives: 2010 Camaro SS Victory Red Join Date: Apr 2015 Location: Rosenberg, Texas Posts: 780	Old school emblems are cool as well __________________ Speed Engineering Headers w/ Texas Speed HFC's ~ Flowmaster 2 1/2" cat back w/Flowmaster Super 10's ~ Cold Air Inductions Intake w/ Scoop and WW relocate ~ VMAX CNC Spiral PTB ~ Cross Drilled and Slotted Rotors w/Hawk pads ~ ZL1 Spoiler ~ SCTX4 RDP Tuned

07-02-2017, 01:35 AM	#21
lionssfan Drives: 2010 2ss camaro Join Date: Nov 2010 Location: mi Posts: 1,184 View My Garage	[QUOTE=TheFlyingBananaSS;9799076]Where did you get that rear SS emblem from?[/QUO Mine were made by SLP. I'm not sure if they make these anymore. I couldn't find any onliine. I just removed mine and went to a painted black bowtie. I could sell mine if your interested. These are in excellent shape. The adhesive on the back needs replacing. Attached Images __________________ 2012 zl1 stock 7000 miles 2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature

08-01-2017, 11:44 PM	#26
lionssfan Drives: 2010 2ss camaro Join Date: Nov 2010 Location: mi Posts: 1,184 View My Garage	SS 69 emblem metal Here's what I have and fabricated on my 2010 heritage grill. I made small brackets and secured with a pale nuts. The SS posts on the emblem can be cut for the stock grill. I'm selling my front and rear SS and going back to the bowtie look. Attached Images __________________ 2012 zl1 stock 7000 miles 2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature

06-22-2017, 03:11 PM	#19
BDG45A Drives: 2012 2SS 45th Anniv Join Date: Jul 2016 Location: St Charles, MO Posts: 12	You can go to Ebay and enter "Chevy SS emblem" and you'll get a couple of hundred different sellers with a variety of styles ranging from $25 each to over $100. I did the old school style because they are larger. You'll have to do a little bending on the attach straps to work with the 5th gen grille, but it wasn't a big deal to make it work. The front emblem still wasn't big enough to cover the bow tie area on the grille so I bought a "Bow Tie Delete" for $35. As others have noted, you cut the studs off for the trunk emblem and grind it down flush. Buy some 3M double sided molding tape and put it in the recess areas of the emblem. Clean the area your sticking it on (emblem and car) really well to remove any grease or wax and press it in place. I've had mine on for over a year, no problems. So you can get it done for about $100.

08-02-2017, 01:14 AM	#28
G701LE Drives: 2010 2SS/RS L99 IBM silver stipes Join Date: Dec 2015 Location: K.C. Kansas Posts: 1,329 View My Garage	I just bought an SLP kit off EBay. I will use the '69 one for the rear. Thanks for the help! I still can't picture how you got the pins through the grill. The only way I could see is drilling through the bowtie delete. Otherwise, it either sat too high, or too low in the grill. __________________ 2010 Imperial Blue w/ Silver stripes 2SS/RS L99 Mods = Not enough....