08-14-2017, 10:46 AM | #407 | |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
Quote:
There are other guys on here running the F-1X than can better vouch for the power because they have built engines that can take the boost this sucker will put up. Rdunn comes to mind . . . He has one mean machine!!
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile |
|
08-14-2017, 08:30 PM | #408 | |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
Quote:
Shop thinks the ARP part number is 612-1250. They are 13.95 for 5 bolts and the 2 wheels will need 17 packs to give you a few spare bolts.
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile Last edited by BiggFoot; 08-15-2017 at 05:34 AM. |
|
08-14-2017, 08:35 PM | #409 | |
Drives: 2010 2SS/RS L99 IBM silver stipes Join Date: Dec 2015
Location: K.C. Kansas
Posts: 1,329
|
Quote:
__________________
2010 Imperial Blue w/ Silver stripes 2SS/RS L99
Mods = Not enough.... |
|
08-14-2017, 09:33 PM | #410 | |
Drives: 2013 Camaro 1LE Join Date: Nov 2013
Location: United States
Posts: 32
|
Quote:
|
|
08-15-2017, 07:46 PM | #411 | |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
Quote:
Before I got the 2010 I now have, I was looking at the ZL1 when it first came out. I had the money together and was going to buy the car and send it straight to Lingenfelter for a bore/stroke, Whipple, cam, headers, etc., but I got in the game too late and couldn't locate a ZL1 (looked ever where). I sort of just forgot about pursuing my hot rod dream then one day I am poking around in the used car section of the Camaro Forum and found this 2010 Camaro in IOM, manual, with Maggie/cam/headers and a few other goodies. It only had 8000 miles on it and ended up costing less that half what I was going to pay for the modded ZL1, so I snatched it up and have been adding HP to it ever since, lol. If a guy really knows what he wants from the beginning, he can save himself a ton of money by going all out and doing it right the first time. Problem is that many of us don't really know what we want and squeezing the oink out of our Camaro's is a learning process, whether you do the work or you hire a shop to do it. GL on your 416 build. It will be a beast!!
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile Last edited by BiggFoot; 08-18-2017 at 12:32 PM. |
|
08-15-2017, 09:35 PM | #412 |
Drives: 2011 2SS/RS LS3 Join Date: Apr 2017
Location: Dallas
Posts: 482
|
Biggs, no truer words have ever been spoken on a forum! But hey, that's the game. Always chasing the next mod...
__________________
GPI Built Procharger D-1/13 PSI/Race Intercooler/SS3 Cam Kit/Kooks LTH/X- pipe/FIC 1050/E85/3.91 gears/Centerforce Dual Disc clutch/Flowmaster Outlaw/775whp/680tqSOLD
|
08-15-2017, 11:06 PM | #413 | |
Drives: 2013 Camaro 1LE Join Date: Nov 2013
Location: United States
Posts: 32
|
I appreciate it. I too wanted a ZL1 but just couldn't afford it at the time. Then the 1le came out and I decided to go that route.
Well end the end there is no replacement for displacement lol... welp let me keep saving this money and get everything some what started. The fuel system and driveline will come first. Quote:
|
|
08-16-2017, 11:56 AM | #414 |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
Taylor my man, that ProCharger still have you grinning from ear to ear??
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile |
08-16-2017, 01:18 PM | #415 |
Drives: 2011 2SS/RS LS3 Join Date: Apr 2017
Location: Dallas
Posts: 482
|
Yes sir! I love the way she sings. So, I rarely use the radio any more.
Just got a quote to add a cam, headers, HFC, pulley and meth. About $5k. Here we go again...
__________________
GPI Built Procharger D-1/13 PSI/Race Intercooler/SS3 Cam Kit/Kooks LTH/X- pipe/FIC 1050/E85/3.91 gears/Centerforce Dual Disc clutch/Flowmaster Outlaw/775whp/680tqSOLD
|
08-16-2017, 01:52 PM | #416 |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
Dang man, when you get all that installed please remind me to steer clear of you! She will really be singing. If you have the $$$, forget the meth and go with E85 if it is available in your area. Its not a cheap conversion but burns clean/cool and is easy on your engine. Yes you will need more fuel pump and injectors, that is why it isn't cheap, but once you make the switch, oh man does it make a difference (especially on a boosted car). It's basically race fuel for < $2/gal.
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile |
08-19-2017, 09:56 AM | #417 |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
Well ladies and gents, it is exactly one week to reckoning day when I get to test this new ProCharger set up. As always when leading up to a track day I am already getting nervous. I am afraid to set my expectations too high because I have done that in the past and in the process experienced great disappointment.
I keep telling myself that the car definitely feels faster but that is with limited testing on the street. I also keep reminding myself that I am bringing an extra 110 hp to the table since my last track day 8 months ago. The deal is that the extra hp really only kicks in at the upper rpm band so I will need to keep that pedal planted and hit my shifts or it will be a disappointing day. My goal is to snatch the top spot on the M6 Anything Goes - Street Registered Fast List, and I need to beat 10.1 sec to take that spot. Guess we will soon see. There have been a number of you that have stuck with me from the beginning of this project and guys all I can say is for the support. I will report back here no matter what the results, be it good or bad, and I have a friend that may come and video some of the runs. I hope he is able to make it because he does a really nice job on video. Any of you guys that can make it out to Royal Purple next Saturday, please come, and if you do then please find me and introduce yourself. Track opens at 5 pm but I probably wont make a run until it begins to cool off a bit (8:00-8:30).
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile |
08-19-2017, 12:04 PM | #418 |
Drives: 2010 Camaro 2SS M6 - Intake/Exhaust Join Date: Sep 2014
Location: Bridgewater
Posts: 693
|
Good luck! I'll be watching for results! Good or bad, I am sure you will come away with some positives, whether it be learnings about driving it again with the new power band, or learn that the car needs some adjustments, but you'll come away with knowledge on how to improve the following time out.
Jon |
08-19-2017, 12:10 PM | #419 |
Drives: 2013 Camaro 1LE Join Date: Nov 2013
Location: United States
Posts: 32
|
Good luck... I'll be up that way next weekend. I'll see if I can make it out
|
08-19-2017, 01:36 PM | #420 |
Drives: Black 2SS RS w/White Stripes Join Date: Mar 2011
Location: Katy, TX
Posts: 775
|
Good luck brotha! I'll try to make it too!
__________________
2010 2SS/RS "ChriSStine":
Pat G Custom Turbo CamMotion Camshaft | AGP TT BB Garrett 62/65's | AGP/Fore Triple Pumps | ID1700X Injectors | Alky Control Twin Nozzle Meth | Custom 3" Exhaust | 3.27 gear set w/ Tru Trac | McLeod Twin RXT | Barton Short Throw Shifter | 6th Gen ZL1 Wheels | BMR 1.4" drop springs | Pfadt rear trailing arms & tie rods | Installed by Me & Tuned by Pat G |
|
|
|
|