Cold Air Inductions Intake... Highly Recommended

[CaliEMT]

Do you guys know if this is paintable?

Gloss Black with some red stuff would look good on my Black SS

[Iwantone2]

Originally Posted by camaroMSUfan

just curious to the mpg gains that yall are seeing that have the product already?

I used to average 15.5 - 16 MPGs and now i'm getting 17.5 - 18 MPGs

[1 RD JEWL]

Originally Posted by CaliEMT

Do you guys know if this is paintable?

Gloss Black with some red stuff would look good on my Black SS

shoot CAI Inc a pm. Good comms and I would ask direct. I will be installing mine in a week or so. Can't wait. Have a business trip saturday and installing new mirrors tomorrow.

[ColtonB2]

I am actually getting mine powder coated flat black as we speak

[1 RD JEWL]

Look at these independent results on the link attached to the first post before choosing. I was going to buy the Hennessey until I saw these. Then chose the C.A.I. induction.
http://www.camaro5.com/forums/showth...=48202&page=14

[CaliEMT]

Originally Posted by ColtonB2

I am actually getting mine powder coated flat black as we speak

Please show me a pic as soon as you get it!!!!!

[1 RD JEWL]

Ok, Got to love this thing not only for looks but the mid-range boost it give s you. Much more throaty when you get on it too. Too early to tell about gas milage.

Enjoy the pix and THANK YOU CAI for a 1st Rate Product!!!

[Iwantone2]

Very clean install!!!!

[BEARS-SS]

Just ordered mine! I can't wait. Or I can...Should I get it painted when I get the GFX and door locks done? Hmmmm...I think yeah, I can wait!

[ColtonB2]

Originally Posted by CaliEMT

Please show me a pic as soon as you get it!!!!!

Here you go! I haven't recieved the intake yet, but I did get this picture from James yesterday. I can't wait for the tube to be done so this baby can ship! I'm puttin it on the day it gets here

[1 RD JEWL]

I installed another C.A.I Inc, CAI today. All I can say is from the way she thought it looked to the response on her initial drive and the permagrin () she was sporting when she saw the responsiveness and the sound it gave her 2SS Automatic was worth it. we had ten of us together doing mods here in Mid Ohio (Dayton Area) and a few others were talking about ordering them.

Thanks James for your product and I am sure you will see a post from yet another proud owner.

I am loving mine still.

Watch for an order for a few more things, like back up filter and filter kit.

[drtwo]

When I unboxed the filter it looks like there was dent on the smaller diameter end that almost looks like a pencil went through it. I tried to spread it out and even out the cotton or whatever the material is. It is clearly thinner than the rest of the filter there. Am I at risk of having dirt suck in the intake or will it likely be OK. It's not a hole anymore, but clearly thinner. Is this something I should contact CAI about or Jannetty or probably not anything to worry about? I know this is sorta vague?

On a good note, the box that contains the filter is VERY well fit. They made it fit EXACTLY to the car!

The tube and filter do not really fit parallel to the engine lines, it seems to be angled a bit on my car (about 15 degrees from horizontal). I hope that others are similar!

[buzzy56]

Got my CAI and will install this coming Thursday.Two questions.Did anyones filter come pre-oiled?Also can you heat up the shrink wrap for the hose hookup with a hair dryer or do you really need a heat gun to shrink it?I did not see a cleaning and oiling kit on there site for sale??
thanks any and all for answers.

[1 RD JEWL]

Originally Posted by drtwo

When I unboxed the filter it looks like there was dent on the smaller diameter end that almost looks like a pencil went through it. I tried to spread it out and even out the cotton or whatever the material is. It is clearly thinner than the rest of the filter there. Am I at risk of having dirt suck in the intake or will it likely be OK. It's not a hole anymore, but clearly thinner. Is this something I should contact CAI about or Jannetty or probably not anything to worry about? I know this is sorta vague?

On a good note, the box that contains the filter is VERY well fit. They made it fit EXACTLY to the car!

The tube and filter do not really fit parallel to the engine lines, it seems to be angled a bit on my car (about 15 degrees from horizontal). I hope that others are similar!

Contact James at CAI about the filter and he will make it right. The angle is not horizontal exactly. Slightly off but meant to be that way due to the box fitting in correctly.

Originally Posted by buzzy56

Got my CAI and will install this coming Thursday.Two questions.Did anyones filter come pre-oiled?Also can you heat up the shrink wrap for the hose hookup with a hair dryer or do you really need a heat gun to shrink it?I did not see a cleaning and oiling kit on there site for sale??
thanks any and all for answers.

Yes to pre-oiled I believe and they said they were going to have a kit. Need James to answer that one. I will be looking to order too if there is one.