injen - Page 10 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bee sting · 06-21-2010, 10:47 PM

Mine was laying on the body to so i took a small piece of foam and rtv it to the body and that kept it from rubbing . and you can't tell the foam is even there. still sucks the washer bottle leaks, guess i'll hear from them tomorrow on the call tag. I also got my rebate today so 1 good thing happened.

gahammerle · 06-22-2010, 07:29 AM

Checked my MPG on the drive to work today. Last 2 times (pre-Injen) got 30.1 & 30.4, avg speed 63 & 64.2. This morning I got 31.2 @ 64.5. All 3 times were with full tank, no AC, windows up, temp low 70s, and a little over 42 miles.

So the Injen gave about 1 MPG more.

formare · 06-22-2010, 07:35 AM

My overall average went from 23 ish to 25 ish and that's with "testing" the sound of acceleration... :-)

bee sting · 06-22-2010, 04:26 PM

Well i heard back from AutoAnyThing today about the leaking washer bottle . This is what InJen told them ....

Thank you for you patience. I have received a response from the manufacturer. They do apologize for the inconvenience. They are shipping you out a new windshield bottle. They stated that the intake and car will run perfectly fine with the windshield bottle leaking, but of course they will be shipping you out a new one. They wanted to insure you no damage will be done to your car. They do not want the defected bottle back, you can destroy it

Camaro Freak · 06-22-2010, 05:48 PM

Quote:

Originally Posted by bee sting

Well i heard back from AutoAnyThing today about the leaking washer bottle . This is what InJen told them ....

Thank you for you patience. I have received a response from the manufacturer. They do apologize for the inconvenience. They are shipping you out a new windshield bottle. They stated that the intake and car will run perfectly fine with the windshield bottle leaking, but of course they will be shipping you out a new one. They wanted to insure you no damage will be done to your car. They do not want the defected bottle back, you can destroy it

Auto Anything and Injen both have great customer service. They will make sure you are happy.

bee sting · 06-22-2010, 09:17 PM

Washer bottle is on the way from InJen so i put some rtv on the grommet last night and today filled the bottle with no leaks . this will work till i get back from the Camaro Nationals this weekend .

Camaro Freak · 06-22-2010, 09:23 PM

Quote:

Originally Posted by bee sting

Washer bottle is on the way from InJen so i put some rtv on the grommet last night and today filled the bottle with no leaks . this will work till i get back from the Camaro Nationals this weekend .

Looks awesome!! Heres mine.

formare · 06-25-2010, 04:36 PM

Quote:

Originally Posted by hawkfe

Had the same issue with the fitment, what I did to keep it from hitting the frame is this, loosen up the lower mount nut and then the tube clamp to the pipe, rotate the bottom toward the front so the pipe rotates, then tighten the hose clamp then lower mount.

X2 works just fine and adds a good bit of clearance.

philthy · 06-25-2010, 09:08 PM

Installed mine tonight....directions were great except for the wiring relocation (pictures were not clear.) I was able to do it without removing the driver's side wheel. Just turned the wheel all the way to reach everything.

Missing the free Hydroshield, it is supposed to be in the same box, right? I have not received my rebate yet, but AutoAnything shipped it so fast it may take a while for the rebate to catch up.

I have the same issue with the hole being too large on the washer fluid tank. I found a grommet to fit the hole and make it smaller to fit the pump. I will still contact AutoAnything to get a new tank and ensure there are no issues down the road.

Test drive was awesome...really does sound meaner when you stomp on it and really mellowed out the Magnaflow exhaust.

formare · 06-25-2010, 10:43 PM

Anybody received the replacement washer fluid container yet?

Anybody?? (BUMP)

formare · 06-30-2010, 12:31 PM

Quote:

Originally Posted by formare

Anybody received the replacement washer fluid container yet?

Anybody?? (BUMP)

(double bump)

Brownhornitt · 06-30-2010, 01:02 PM

Quote:

Originally Posted by formare

(double bump)

It's in my garage right now. Going to install it today. I'll try to remember to post how it goes.

Brownhornitt · 06-30-2010, 09:30 PM

Works. But now the pump doesn't sit in the gap properly. This is probably the "lean" that people have been talking about.

gahammerle · 07-17-2010, 12:35 PM

I just received a new grommet in the mail today and installed it. Seems to be a good fit. Unfortunately I don't have any washer fluid so I don't know if it leaks. I doubt it will leak because it was tight.

06-22-2010, 07:29 AM	#128
gahammerle Drives: 2010 Camaro LS M6 Inferno Orange Join Date: May 2010 Location: Lebanon, OH Posts: 1,673	Checked my MPG on the drive to work today. Last 2 times (pre-Injen) got 30.1 & 30.4, avg speed 63 & 64.2. This morning I got 31.2 @ 64.5. All 3 times were with full tank, no AC, windows up, temp low 70s, and a little over 42 miles. So the Injen gave about 1 MPG more. __________________ Gordy Injen CAI / Solo Mach-X LLT / Solo High-flow res-cats / Barton short shifter / RX Catch Can / RPI Gills / 35% tint / LED Footwell Lighting Front & Rear / Pedders Street 1 / Pedders steering rack bushing / SS struts / Pfadt drop springs / VMax Ported Throttle Body / Spohn Toe Rods / Spohn Trailing Arms / Trifecta Tune / MACE 25mm Intake Spacers Find me on Facebook: http://www.facebook.com/gahammerle

06-22-2010, 07:35 AM	#129
formare The Milano Drives: 2017 Firefly ShipWorks Join Date: Jun 2010 Location: Chicagoland (Crown Point, IN) Posts: 1,877 View My Garage	My overall average went from 23 ish to 25 ish and that's with "testing" the sound of acceleration... :-) __________________ My first Love. She was called "Miss Carriage" (still cry when I think about her) 383, Muncie 4 speed, custom linkage mated to hurst short throw shifter.

06-22-2010, 09:17 PM	#132
bee sting Drives: 1997 30th Ann. Z28 & 2010 2LT RS Join Date: Jan 2010 Location: Suffolk Virginia Posts: 1,933 View My Garage	InJen installed Washer bottle is on the way from InJen so i put some rtv on the grommet last night and today filled the bottle with no leaks . this will work till i get back from the Camaro Nationals this weekend . Attached Images

06-25-2010, 09:08 PM	#135
philthy Drives: 1971 Monte Carlo/2010 Camaro 2LT Join Date: Sep 2007 Location: Macomb Township, MI Posts: 823 View My Garage	Installed mine tonight....directions were great except for the wiring relocation (pictures were not clear.) I was able to do it without removing the driver's side wheel. Just turned the wheel all the way to reach everything. Missing the free Hydroshield, it is supposed to be in the same box, right? I have not received my rebate yet, but AutoAnything shipped it so fast it may take a while for the rebate to catch up. I have the same issue with the hole being too large on the washer fluid tank. I found a grommet to fit the hole and make it smaller to fit the pump. I will still contact AutoAnything to get a new tank and ensure there are no issues down the road. Test drive was awesome...really does sound meaner when you stomp on it and really mellowed out the Magnaflow exhaust. __________________ 2024 Camaro SS convertible 2010 Camaro 2LT 2019 Cadillac CTS 1971 Monte Carlo

06-25-2010, 10:43 PM	#136
formare The Milano Drives: 2017 Firefly ShipWorks Join Date: Jun 2010 Location: Chicagoland (Crown Point, IN) Posts: 1,877 View My Garage	Anybody received the replacement washer fluid container yet? Anybody?? (BUMP) __________________ My first Love. She was called "Miss Carriage" (still cry when I think about her) 383, Muncie 4 speed, custom linkage mated to hurst short throw shifter. Last edited by formare; 06-30-2010 at 12:31 PM.

06-21-2010, 10:47 PM	#127
bee sting Drives: 1997 30th Ann. Z28 & 2010 2LT RS Join Date: Jan 2010 Location: Suffolk Virginia Posts: 1,933 View My Garage	Mine was laying on the body to so i took a small piece of foam and rtv it to the body and that kept it from rubbing . and you can't tell the foam is even there. still sucks the washer bottle leaks, guess i'll hear from them tomorrow on the call tag. I also got my rebate today so 1 good thing happened.

06-22-2010, 04:26 PM	#130
bee sting Drives: 1997 30th Ann. Z28 & 2010 2LT RS Join Date: Jan 2010 Location: Suffolk Virginia Posts: 1,933 View My Garage	Well i heard back from AutoAnyThing today about the leaking washer bottle . This is what InJen told them .... Thank you for you patience. I have received a response from the manufacturer. They do apologize for the inconvenience. They are shipping you out a new windshield bottle. They stated that the intake and car will run perfectly fine with the windshield bottle leaking, but of course they will be shipping you out a new one. They wanted to insure you no damage will be done to your car. They do not want the defected bottle back, you can destroy it

06-30-2010, 09:30 PM	#139
Brownhornitt Drives: 2006 White Corvette Convertible Join Date: Feb 2010 Location: San Jose, CA Posts: 948 View My Garage	Works. But now the pump doesn't sit in the gap properly. This is probably the "lean" that people have been talking about. __________________ The Corvette is an animal.

07-17-2010, 12:35 PM	#140
gahammerle Drives: 2010 Camaro LS M6 Inferno Orange Join Date: May 2010 Location: Lebanon, OH Posts: 1,673	I just received a new grommet in the mail today and installed it. Seems to be a good fit. Unfortunately I don't have any washer fluid so I don't know if it leaks. I doubt it will leak because it was tight. __________________ Gordy Injen CAI / Solo Mach-X LLT / Solo High-flow res-cats / Barton short shifter / RX Catch Can / RPI Gills / 35% tint / LED Footwell Lighting Front & Rear / Pedders Street 1 / Pedders steering rack bushing / SS struts / Pfadt drop springs / VMax Ported Throttle Body / Spohn Toe Rods / Spohn Trailing Arms / Trifecta Tune / MACE 25mm Intake Spacers Find me on Facebook: http://www.facebook.com/gahammerle

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Injen V6 true cold air intake	bng804	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	384	11-03-2011 07:26 AM
Injen Power Flow True Cold Air Intakes for the V6\|3.8L +16rwhp/tq! \| FREE S&H!	AJ@ECSMotorsports	V8 Bolt-Ons & Tunes	108	12-18-2010 11:42 AM
Injen Power Flow True Cold Air Intakes Camaro SS\|V8 6.2L ~ +21rwhp/19tq! \| FREE S&H!	AJ@ECSMotorsports	V8 Bolt-Ons & Tunes	71	11-13-2010 04:57 PM
New Injen True Cold Air Intake for the SS	bng804	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	47	02-11-2010 04:43 PM
Injen air system - Wholesale prices	mmbarberoilman	V8 Bolt-Ons & Tunes	1	02-09-2010 03:10 PM