Photoshops Request thread.

[Ferrarimk13]

Can someone put some black fender hash marks on these two and blackout the bowties and side marker lights? thank you!!
edit: oh and can anyone put a dovetail spoiler on there? Sorry for being so picky!

[moto-camaro]

if you can get me a bigger pic i can probably do a better job, higher resolution pictures are easier to work with i find

[moto-camaro]

that stripe on the stang looked like a steel blue kind of color
look about right?

[moto-camaro]

swiped to dovetail off the dale jr., so it looks a little bit 2-tone

[s3d83d]

@moto-camaro
Thx man! that looks better than I thought it would. I like the blue that you chose. Now I'll have to see if I can find paint codes.

If you have time, could you also use the same colors, and incorporate the designs that I used in post #'s 1290 and 1291 of this thread on page 52 using chocolate race stripes on the IOM body with the blue trim. And maybe try post #1299's design (pg52 also) and drop the blue but use chocolate with a chocolate pin-strip.

I think I've finally narrowed down the colors that I want, it's just a matter of nailing down the design.

Thanks moto, you're helping me make up my mind!!

I planned on getting the factory ground effects also, I think I'll have to get those painted in the chocolate also!!

[Ferrarimk13]

Originally Posted by moto-camaro

swiped to dovetail off the dale jr., so it looks a little bit 2-tone

looks sweet! i love the way your hash marks come out perfect. Thanks moto!

[moto-camaro]

Originally Posted by s3d83d

@moto-camaro
Thx man! that looks better than I thought it would. I like the blue that you chose. Now I'll have to see if I can find paint codes.

If you have time, could you also use the same colors, and incorporate the designs that I used in post #'s 1290 and 1291 of this thread on page 52 using chocolate race stripes on the IOM body with the blue trim. And maybe try post #1299's design (pg52 also) and drop the blue but use chocolate with a chocolate pin-strip.

I think I've finally narrowed down the colors that I want, it's just a matter of nailing down the design.

Thanks moto, you're helping me make up my mind!!

I planned on getting the factory ground effects also, I think I'll have to get those painted in the chocolate also!!

here's one of those designs, i'll give the other one a go for you tomorrow

[moto-camaro]

Originally Posted by Ferrarimk13

looks sweet! i love the way your hash marks come out perfect. Thanks moto!

thanks

[fixxxer525]

What about this in Cyber Grey?

[moto-camaro]

Originally Posted by fixxxer525

What about this in Cyber Grey?

CGM is hard to render, and that's a pretty small pic, it's hard to select the edges well, here's an attempt at it though.

[fixxxer525]

Veddy Niice (in Borat voice)

[Big D]

Originally Posted by moto-camaro

how wide did you want the stripe?

One that follows the coul line would be great

[Big D]

Don't know if I replied correctly but a stripe that follow the width of the the cowl (raised section of the hood) would be great. I am not sure if it is called the cowl. I am going to by the .ai file from a website so I can lay out all the different graphics I can think of for vinyl cutting. I have my own plotter and stuff to do it all, so I figured I would try all the graphics that look good in photoshop and then put them on my Camaro until I find what I want to have painted. The .ai file will allow me to make all dimensions true to the actual car before doing and cutting.

[moto-camaro]

okay Big D, here you go. i can't attach my PSD file for you, it's 10 or 100 times the forums allowable attachment size....
if you need the PSD file, send me a PM with your e-mail address and i can send that along to you.

let me know if i misunderstood what you wanted