What Did You Do To Your Camaro Today? - Page 1070 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ruebernard · 11-01-2015, 06:36 PM

Quote:

Originally Posted by Shawno72

Is that in the satin black that they offer?

Similar. I bought it just primered.My brother in law does body work. We prepped it and then he shot it with a couple of coats of gloss black then used a matte finish clear coat. Turned out beautifully.

Mdun6 · 11-01-2015, 06:39 PM

Shawno72 · 11-01-2015, 08:10 PM

Quote:

Originally Posted by Ruebernard

Similar. I bought it just primered.My brother in law does body work. We prepped it and then he shot it with a couple of coats of gloss black then used a matte finish clear coat. Turned out beautifully.

Perfect. Thank you.

Stormcloak · 11-01-2015, 11:52 PM

Another drive today, and I ordered ramps, trans / diff fluids, both of which will be changed along with the oil. We have a very nice week ahead of us, considering that it's November, and I have the next 3 days off, so I'll be able to get the rock guards installed and a full detailing done.

xrivera91 · 11-02-2015, 08:37 AM

Had a little fun after kooks install.

Demon War Horse · 11-02-2015, 10:05 AM

Quote:

Originally Posted by xrivera91

Had a little fun after kooks install.

Tire abuse! Approved!

Nice rolling shot!

xrivera91 · 11-02-2015, 11:07 AM

Quote:

Originally Posted by Demon War Horse

Tire abuse! Approved!

Nice rolling shot!

Haha thanks that was my first burnout ever lol

KICKER · 11-02-2015, 06:21 PM

Installed new graphics on door panel.

KICKER · 11-02-2015, 06:22 PM

Passenger side.

KICKER · 11-02-2015, 06:23 PM

Blacked-out the rear.

tazman · 11-02-2015, 07:05 PM

Washed the car and put my SLP gill stickers on.

Mike14bumblebee · 11-03-2015, 12:11 AM

Last exterior wash before winter storage
Name: image.jpg
Views: 830
Size: 100.1 KB

Ace0751 · 11-03-2015, 07:35 AM

Replaced the cabin air filter which was very easy to replace. Pop a couple pins, take the old filter out and put the new one in. Pretty simple. It was a pain getting the cover back on though.

BLK141SS · 11-03-2015, 10:26 AM

Replaced the plastic idler pulley with a billet one. Took all of 2 minutes to install. Nicely made with a heavy duty replaceable bearing. Got it from Phastek.

11-01-2015, 06:39 PM	#14968
Mdun6 Drives: 2022 Camaro 2SS Join Date: Apr 2010 Location: Kettering Ohio Posts: 99	Washed and Waxed

11-01-2015, 11:52 PM	#14970
Stormcloak slower than you Drives: 2012 C6 Z06 Join Date: Oct 2015 Location: NY Posts: 668 View My Garage	Another drive today, and I ordered ramps, trans / diff fluids, both of which will be changed along with the oil. We have a very nice week ahead of us, considering that it's November, and I have the next 3 days off, so I'll be able to get the rock guards installed and a full detailing done. __________________

11-02-2015, 08:37 AM	#14971
xrivera91 Drives: 2015 Camaro 2ss Join Date: Apr 2015 Location: 07002 Posts: 1,165 View My Garage	Had a little fun after kooks install. Attached Images

11-02-2015, 06:21 PM	#14974
KICKER Drives: 2010 CAMARO 2SS/RS WHITE Join Date: Jan 2011 Location: PENSACOLA FLORIDA Posts: 1,209 View My Garage	Installed new graphics on door panel. Attached Images __________________

11-02-2015, 06:22 PM	#14975
KICKER Drives: 2010 CAMARO 2SS/RS WHITE Join Date: Jan 2011 Location: PENSACOLA FLORIDA Posts: 1,209 View My Garage	Passenger side. Attached Images __________________

11-02-2015, 06:23 PM	#14976
KICKER Drives: 2010 CAMARO 2SS/RS WHITE Join Date: Jan 2011 Location: PENSACOLA FLORIDA Posts: 1,209 View My Garage	Blacked-out the rear. Attached Images __________________

11-02-2015, 07:05 PM	#14977
tazman Drives: 2014 ZL1 Join Date: Aug 2015 Location: Tucson AZ Posts: 217	Washed the car and put my SLP gill stickers on. Attached Images

11-03-2015, 12:11 AM	#14978
Mike14bumblebee Drives: 2014 yellow 2SS/RS Join Date: Apr 2015 Location: Stoney Creek, Ontario Posts: 488 View My Garage	Last exterior wash before winter storage __________________ K&N, Borla ATAK axle back, resonator delete, Speed Engineering headers,Vitesse, Zl1 wheels, ACS rocker panels, 1LE splitter

11-03-2015, 07:35 AM	#14979
Ace0751 GEN5 Detail Drives: 2011 Synergy Series 2SS Convertible Join Date: Sep 2014 Location: Northeast, OH Posts: 1,986	Replaced the cabin air filter which was very easy to replace. Pop a couple pins, take the old filter out and put the new one in. Pretty simple. It was a pain getting the cover back on though. __________________ Roto-Fab CAI, Borla ATAK Exhaust System, Stainless Power Headers, RX Performance Catch Can, ACS T4 Splitter, Oracle side markers, Dyno Tuned by RDP Motorsports

11-03-2015, 10:26 AM	#14980
BLK141SS Drives: 2014 1SS M6 NPP Join Date: Jun 2015 Location: Watauga,Tx Posts: 211 View My Garage	Replaced the plastic idler pulley with a billet one. Took all of 2 minutes to install. Nicely made with a heavy duty replaceable bearing. Got it from Phastek.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM