Corpus Christi Meets and Greets - Page 109 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

usnatclee · 07-17-2013, 07:10 PM

Quote:

Originally Posted by STXCamaro

Oh. Well then, I won't be seeing yous guys in the event of inclement weather. Otherwise game on right?

What time Saturday? I've never installed headers, but I'd be happy to watch and learn.

I'm not sure yet. Depends who is willing to help but probably noonish. Ill send you a PM when I know for sure.

usnatclee · 07-17-2013, 09:30 PM

Also if anyone has a jack that I can borrow it would be very much appreciated. I have two jack stands but no jack (except the offroad one for the jeep which won't work). If not I guess I will go buy one but would rather not right now.

Witchdoctor92 · 07-18-2013, 07:55 AM

I have a jack but it is not low profile and does not get the car up very high. I would recommend the Auto Hobby shop on base. They have several lifts and that will make it much easier. Sorry I can't help but my son is in town and we are busy for the next couple weeks.

converted · 07-18-2013, 12:09 PM

Quote:

Originally Posted by usnatclee

Also if anyone has a jack that I can borrow it would be very much appreciated. I have two jack stands but no jack (except the offroad one for the jeep which won't work). If not I guess I will go buy one but would rather not right now.

Sorry but i will be stuck here in dilley this weekend... But if it would help any i do have ramps at the house you could borrow.

usnatclee · 07-18-2013, 05:37 PM

Quote:

Originally Posted by converted

Sorry but i will be stuck here in dilley this weekend... But if it would help any i do have ramps at the house you could borrow.

I have ramps too. The ones we used to do mike's headers but I think it may be easier to do on base on the lifts.

usnatclee · 07-18-2013, 08:35 PM

Really? :( Nobody can help me? Its going to be really difficult by myself.

Tara Martin · 07-18-2013, 09:43 PM

Clark,

The last headers that I put on were back in '82 when I put them on my '79 Z. I bet it's harder on these high tech Camaros... Sadly, my Saturday is all full of events already, or I'd look, listen and pass wrenches. I have a little jack that might work, too.

Good luck!

Tara

Witchdoctor92 · 07-18-2013, 10:07 PM

Quote:

Originally Posted by usnatclee

Really? :( Nobody can help me? Its going to be really difficult by myself.

Sorry man, My son is in town from College and I will be spending the day with him.

mp51998 · 07-19-2013, 05:06 AM

And I'm still in Dubai.

Jerry7297 · 07-19-2013, 08:17 AM

I will be picking up my son for the rest of his summer down here Sat.

Witchdoctor92 · 07-19-2013, 04:53 PM

So I ordered new wheels today. They said Forgestar is running like 8-12 weeks to delivery. I am counting down. Gonna try a 19X10 square setup.

converted · 07-19-2013, 10:26 PM

Quote:

Originally Posted by Witchdoctor92

So I ordered new wheels today. They said Forgestar is running like 8-12 weeks to delivery. I am counting down. Gonna try a 19X10 square setup.

Dude!!!! That should be a rockin set up!!! Jealous a lil bit!!

mp51998 · 07-20-2013, 03:59 AM

Quote:

Originally Posted by Witchdoctor92

So I ordered new wheels today. They said Forgestar is running like 8-12 weeks to delivery. I am counting down. Gonna try a 19X10 square setup.

Nice. Can't wait to see them.

usnatclee · 07-20-2013, 10:12 AM

Hey yall I need some help. I get the oil dipstick tube back in. Can one of yall give me a text or call if you can stop by so I can see how your dipstick tube is run in the car.

07-17-2013, 09:30 PM	#1514
usnatclee Drives: '12 2SS/RS, '13 Vette, '13 Wrangler Join Date: May 2012 Location: wherever the Navy sends me Posts: 740	Also if anyone has a jack that I can borrow it would be very much appreciated. I have two jack stands but no jack (except the offroad one for the jeep which won't work). If not I guess I will go buy one but would rather not right now. __________________ 2012 Camaro Ashen Grey Metallic 2SS/RS "Timberwolf". Custom exhaust, RX oil catch can and oil breather, CAI inc intake, SLP 160* thermostat, TSP 2" LT headers w/ off road pipes, custom cam, tuned. 467rwhp 450rwtq. 2013 Corvette Torch Red LS3. 378rwhp/375rwtq SAE corrected, tuned. ROCK CHALK JAYHAWK GO KU!

07-18-2013, 07:55 AM	#1515
Witchdoctor92 Drives: 2012 1SS Black with white rally str Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 611	I have a jack but it is not low profile and does not get the car up very high. I would recommend the Auto Hobby shop on base. They have several lifts and that will make it much easier. Sorry I can't help but my son is in town and we are busy for the next couple weeks. __________________ It's good to be the King.

07-18-2013, 08:35 PM	#1518
usnatclee Drives: '12 2SS/RS, '13 Vette, '13 Wrangler Join Date: May 2012 Location: wherever the Navy sends me Posts: 740	Really? :( Nobody can help me? Its going to be really difficult by myself. __________________ 2012 Camaro Ashen Grey Metallic 2SS/RS "Timberwolf". Custom exhaust, RX oil catch can and oil breather, CAI inc intake, SLP 160* thermostat, TSP 2" LT headers w/ off road pipes, custom cam, tuned. 467rwhp 450rwtq. 2013 Corvette Torch Red LS3. 378rwhp/375rwtq SAE corrected, tuned. ROCK CHALK JAYHAWK GO KU!

07-18-2013, 09:43 PM	#1519
Tara Martin Loves Camaros Drives: Red '79 Z28, '24 Blk A10 ZL-1 Vert Join Date: Sep 2012 Location: Corpus Christi, TX Posts: 1,626 View My Garage	Clark, The last headers that I put on were back in '82 when I put them on my '79 Z. I bet it's harder on these high tech Camaros... Sadly, my Saturday is all full of events already, or I'd look, listen and pass wrenches. I have a little jack that might work, too. Good luck! Tara __________________ Old and new, sharing space! Last edited by Tara Martin; 07-18-2013 at 11:53 PM.

07-19-2013, 04:53 PM	#1523
Witchdoctor92 Drives: 2012 1SS Black with white rally str Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 611	So I ordered new wheels today. They said Forgestar is running like 8-12 weeks to delivery. I am counting down. Gonna try a 19X10 square setup. __________________ It's good to be the King.

07-19-2013, 05:06 AM	#1521
mp51998 Drives: Black 2011 2SS/RS Join Date: May 2011 Location: S. Texas Posts: 1,817	And I'm still in Dubai.

07-19-2013, 08:17 AM	#1522
Jerry7297 Drives: 2018 2SS/ 1LE Join Date: Sep 2012 Location: San Marcos TX Posts: 710 View My Garage	I will be picking up my son for the rest of his summer down here Sat.

07-20-2013, 10:12 AM	#1526
usnatclee Drives: '12 2SS/RS, '13 Vette, '13 Wrangler Join Date: May 2012 Location: wherever the Navy sends me Posts: 740	Hey yall I need some help. I get the oil dipstick tube back in. Can one of yall give me a text or call if you can stop by so I can see how your dipstick tube is run in the car. __________________ 2012 Camaro Ashen Grey Metallic 2SS/RS "Timberwolf". Custom exhaust, RX oil catch can and oil breather, CAI inc intake, SLP 160* thermostat, TSP 2" LT headers w/ off road pipes, custom cam, tuned. 467rwhp 450rwtq. 2013 Corvette Torch Red LS3. 378rwhp/375rwtq SAE corrected, tuned. ROCK CHALK JAYHAWK GO KU!