08-25-2019, 06:37 AM | #141 |
|
Yea, in a LS3 with HSA and CAGS gone and with a flip key you feel you’re in charge behind the wheel and not a computer. Now if only there was a throttle body linkage mod !
|
08-25-2019, 12:13 PM | #142 |
|
No doubt!
__________________
Car mods: never enough!
|
06-22-2020, 02:21 AM | #143 | |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
Quote:
I feel better that there was someone else out there that had the same issue, but it is obviously a very rare occurrence. I’m considering trying another sensor to see if the same thing happens or not. Anyone else happen to have experienced the stabilitrak issue at all the past five years besides myself and LoneCynic?
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
|
06-22-2020, 05:47 AM | #144 |
|
Was HSA always bypassed when stablitrak and traction control where on ?
|
06-22-2020, 06:59 AM | #145 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
HSA was never bypassed simultaneously with Stabilitrak working correctly. I swapped the automatic sensor in, fired it up for the first time, and Service Stabilitrak came on immediately.
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
06-22-2020, 07:28 AM | #146 |
|
Hmmm, wouldn’t think the sensor was bad. Couple of thoughts ...check the sensor part nbr to make sure it’s the correct one, was it installed on level surface?
|
06-22-2020, 09:52 AM | #147 | |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
Quote:
Thanks for reminding me to check the obvious
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
|
06-22-2020, 01:47 PM | #148 | |
|
Quote:
|
|
06-24-2020, 10:27 AM | #149 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
For the record, the module I received that did not work for my SS is actually for a ZL1. I’m just posting this should anyone else run into the same issue in the future (or a ZL1 person wants to get rid of their HSA - this is the one they need).
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
06-24-2020, 07:15 PM | #150 |
#938 of 1524
Drives: 2013 Hot Wheels Edition Camaro Join Date: Mar 2017
Location: West Virginia
Posts: 186
|
That's good to know that the ZL1 part won't work on a regular SS model.
I'm glad I swapped that module on my car, that hill start assist junk drove me bananas! |
06-25-2020, 07:57 PM | #151 |
|
It's crazy how much impact the smallest mods can have. Between replacing this sensor and installing the skip-shift eliminator you make such a huge difference in driveability.
(Of course, these are both fixes to bullshit features we all wish weren't there.) Sent from my Pixel 4 XL using Tapatalk
__________________
|
09-10-2020, 09:44 AM | #152 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
Update... after getting the correct automatic SS sensor... it still didn’t work. Same issue with stabilitrak and everything getting whacked out. I’ve given up on this for the time being and just trying to get used to pulling the e-brake up a click when I know there are places it will engage. Glad others haven’t really had this issue, but it’s not worked for me.
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
08-29-2021, 01:21 PM | #153 |
Drives: 2013 Camaro 2SS/RS Join Date: Dec 2017
Location: Ontario, Canada
Posts: 28
|
Confirmation that this does work. 2013 Camaro 2SS/RS now a real Manual Transmission vehicle. No more Nanny, we a big kid now and can move off from a red light on a hill by ourselves without rolling backwards.
|
09-21-2021, 07:59 PM | #154 |
Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021
Location: NY
Posts: 1,327
|
2014 2 SS/RS I installed the recommended sensor in this thread and all is well, Hill assist is gone and everything seems to be working as it should. The job from start to finish took about 20 to 30 Mins.
__________________
GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir
GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount. |
|
|
|
|