06-03-2019, 08:27 PM | #155 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Nice!!! I wanted to get it about a month ago but they won’t ship to CA
__________________
AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6
|
06-03-2019, 08:30 PM | #156 |
|
Sounds like you need a buddy in an adjacent state, then have it sent there so you can go pick it up and bring it back
__________________
Cai intake and a few other mods😎
|
06-03-2019, 08:36 PM | #157 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Yea that’ll probably be my next move. I can literally pick it up from their warehouse but they won’t sell it to me LOL
__________________
AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6
|
06-03-2019, 08:52 PM | #158 |
|
That's sucks, wonder if they would sell it to someone with a out of state liscence while they were there
__________________
Cai intake and a few other mods😎
|
06-09-2019, 08:15 PM | #159 |
|
Picture of what's included
__________________
Cai intake and a few other mods😎
|
06-13-2019, 07:54 AM | #160 |
|
__________________
Cai intake and a few other mods😎
|
06-13-2019, 07:55 AM | #161 |
|
Most of the kit went well, items that may be throwing the kit off for a convertible( a coupe I dont believe you would have any issues other than those cheap ass clamps), the agp turbo pipe off the turbos, there is a new piece with the kit but it doesnt have the same clamping system on the turbo(also if you do use it you need to request or install o2 sensor bungs so I used the agp pipe instead, but I had to use a adapter which I believe through off the kit enough to make the stainless works kit work less than idea with clearance issues for the bracing, I actually had to bend the braces some for it to work, but I may end up having to use spacers since it literally has 0 clearance on top or bottom of the exhaust
__________________
Cai intake and a few other mods😎
|
07-20-2019, 05:46 PM | #162 |
|
Update on the braille 21 lb battery wont hold charge past 4 days and also believe its dead now, so for a racecar i would recommend, but for a street car i would keep the full size battery
__________________
Cai intake and a few other mods😎
|
08-13-2019, 06:00 PM | #163 |
|
3 inch exhaust on dyno
https://youtu.be/BL1VBt2HAFM
__________________
Cai intake and a few other mods😎
|
04-30-2020, 10:36 PM | #164 |
|
So just an update to the build, I have added a btr stage 1 tt cam, and now currently in process of adding some pedders coilover plus some qa1 lca's for the rear, after all this ill get an alignment and start working on my new tune
__________________
Cai intake and a few other mods😎
|
05-08-2020, 05:05 PM | #165 |
|
New vs old
__________________
Cai intake and a few other mods😎
|
10-04-2020, 03:30 PM | #166 |
|
Results from the latest track outing, traction was an issues but I did managed to make this run right after they put down a new coat of stick um, Da 8000 ft and car weights 4600 lbs
__________________
Cai intake and a few other mods😎
Last edited by Moreair1; 10-06-2020 at 09:09 PM. |
10-06-2020, 09:18 PM | #167 |
|
Next mod some 17s with mt's
__________________
Cai intake and a few other mods😎
|
|
|