Override Motorsports DRL Harness?

[GearHeadPeter]

Originally Posted by BilJ

Appreciate the info and diagram, GHP....good stuff. Just one more question though, if you please. Since you removed both relays, did you also remove the ground wire from the harness to the frame and also remove the 12V line to the fuse box? TIA

Yep I removed everything as it was not needed anymore with the diodes.

I had taken my car to the dealer to replace my AC condensor, and before that everything worked w/o issues. However after the repair the DRL harness would not work, and the only thing I can come up with is the dealer reflashed my BCM and it messed with FieldGoal00's harness. Ofer (2SSRS) and I both worked on it and this is the only way I could make it work.

[GearHeadPeter]

Originally Posted by 2SSRS

Nice work Peter, its how i do the non Rs harness. and its that same as the 2$ DRL harness.

Thanks Ofer as I learned from the best.

You should see the project I am doing on the 65 now. Power rack and pinion, which necessitated buying new JBA short headers, newer 66 motor mounts to raise the engine 1/2", relocating my brake proportioning value as it was too close to the headers, and relocating my factory Z-bar back 1/2" for the clutch and to clear the new steering intermediate shaft to the rack. That was just the bottom end. Putting in the new PS pump and making everything line up was easy compared to what I am still doing. Needles to say I missed Good Guys in March.

Oh well when we deviate from factory we pay.

[BilJ]

Originally Posted by GearHeadPeter

Yep I removed everything as it was not needed anymore with the diodes.

I had taken my car to the dealer to replace my AC condensor, and before that everything worked w/o issues. However after the repair the DRL harness would not work, and the only thing I can come up with is the dealer reflashed my BCM and it messed with FieldGoal00's harness. Ofer (2SSRS) and I both worked on it and this is the only way I could make it work.

Thanks again, GearHeadPeter. This looks like a simpler set-up than what I've got now....I like the idea of the inline plug and play without the need for the extra wiring to the frame and fuse box. As soon as I have a hint of a problem with mine, I will switch over to your set-up....with your help, and Ofer's, it looks like I will be prepared. Later.

[GearHeadPeter]

Originally Posted by BilJ

Thanks again, GearHeadPeter. This looks like a simpler set-up than what I've got now....I like the idea of the inline plug and play without the need for the extra wiring to the frame and fuse box. As soon as I have a hint of a problem with mine, I will switch over to your set-up....with your help, and Ofer's, it looks like I will be prepared. Later.

One thing that I like about the diode setup I did is now the AAC P13 Plasma bulbs are even brighter than before.

[FINALLYSATISFIED]

I've been looking for an Adaptive performance harness for the longest...

[ghostrider2]

Ok I've reading and decided not to trust either company's that have displayed poor customer service. I found something that might work but wanted to run it by you guys. I want something that will work and not just waste money. Here's the link
http://www.phastekperformance.com/20...light-drl1.htm

[iKeablr]

Originally Posted by ghostrider2

Ok I've reading and decided not to trust either company's that have displayed poor customer service. I found something that might work but wanted to run it by you guys. I want something that will work and not just waste money. Here's the link
http://www.phastekperformance.com/20...light-drl1.htm

That'll work fine but you need to tap into the wires yourself. You should just get the harness from 2SSRS he has a plug n' play and it works great. Installation is 2 minutes.

[ghostrider2]

Does 2SSRS have an actual website or is it something he does in his garage in his spare time?

[UF4LIFE102SS]

Here

[iKeablr]

Originally Posted by ghostrider2

Does 2SSRS have an actual website or is it something he does in his garage in his spare time?

Check out the site provided by UG4LIFE102SS the harness is under Plug & Play Harness

[ghostrider2]

Thank you.

[ghostrider2]

2SSRS, just got your harness today in the mail, it goes on this weekend. I will also leave your ebay feedback then.

[BLKMAJK]

Yes I had the same problem, I ordered from override motor sports (Patricia Marlow) on April 25th and still no sign of my item. I have sent numerous emails ans still no response. I just filled a dispute with PayPal. So sad that this is happening. Hopefully I get my DRL Harness. Or at least my money back.

[iKeablr]

Originally Posted by BLKMAJK

Yes I had the same problem, I ordered from override motor sports (Patricia Marlow) on April 25th and still no sign of my item. I have sent numerous emails ans still no response. I just filled a dispute with PayPal. So sad that this is happening. Hopefully I get my DRL Harness. Or at least my money back.

If you get your money back purchase the harness from 2SSRS he is a reputable person and his harness works. Check out his site: http://www.gen5diy.com/