What Did You Do To Your Camaro Today? - Page 1297 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jshaf · 12-04-2016, 09:48 PM

washed and detailed the exterior, was in the 40's here. have done preliminary stuff like cleaning the interior, putting conditioner on the leather, putting protectant on the black plastic, stabil, etc. tendered and covered after. now wait 12-14 weeks :(

GMfan454 · 12-05-2016, 04:54 PM

Man, I started consulting work and haven't been able to mess with my car at all. I priced a full exhaust system with headers and a tune but haven't pull the trigger yet. Miss my car.

Al Jay · 12-05-2016, 07:36 PM

Brand new 295/35/20 Michelin Pilot Super Sports. Mounted and balanced by peps boys, than took them to Americas tire to get re-balanced again. 6 ounces off on both wheels. I knew something was up when the tech threw on 2 strips of wheel weights.

Mr. Stacy · 12-05-2016, 11:41 PM

Quote:

Originally Posted by GMfan454

Man, I started consulting work and haven't been able to mess with my car at all. I priced a full exhaust system with headers and a tune but haven't pull the trigger yet. Miss my car.

Me 2. Been in the shop for a couple weeks. Authorized new rear struts today to try to fix the woeful Hotchkis upgrade handling fiasco.

sixtyseven · 12-06-2016, 02:36 AM

Quote:

Originally Posted by CCMADONNA

it is Sunday morning and in my prayers I am including all of you on Camaro5, who have to store your Camaro for the winter.

Stay strong my friends!

It's not that bad. This would be my third winter storage. It feels like a responsibility off my shoulders this time. No worries about getting that first ding, Don't have to wash every other week. No mileage and fuel costs adding up. And best of all its like makeup sex come next spring.

Gunmetal Speedster · 12-06-2016, 02:58 AM

Officially have headers and off road connection pipes on the way

been a long time coming!

Woo · 12-06-2016, 06:52 AM

Forgive me Camaro nation....I took a flight to Tampa for some diagnostic test on my back and had to rent a vehicle to get me around town. Soooooo they had a white 2016 Camaro and a black 2016 "musty" stang for rental... I went with the stang to see what these "stangers" pump their chest about. I must say it handles pretty well and has smooth acceleration but I'd still choose my Chevy Camaro as a daily driver any day, hands down....

Sent from my iPhone using Tapatalk

Welker2 · 12-06-2016, 01:40 PM

Went out to go to the store and found this sitting on my center console ... My granddaughter will be visiting soon, so my wife picked it up yesterday for her; guess she decided to start moving him around early

:

InFiD3ViL · 12-06-2016, 04:24 PM

I didn't actually 'DO' anything to it, but I bought it a few presents today...

TSP LT Headers, Granatelli 0 Ohm Wires, Stock Delco Plugs, Vitesse Paddle Shifters, and an OEM key fob so I can go back to the pre-recall style.

Gunmetal Speedster · 12-06-2016, 06:36 PM

SS clones tips came in! 3in inlet to quad 4in outlet

Gunmetal Speedster · 12-07-2016, 06:35 PM

Got my SS clones installed today

Lil' Nasty · 12-07-2016, 08:38 PM

Quote:

Originally Posted by Gunmetal Speedster

Got my SS clones installed today

Looks Great!

I prefer the rocket ship tips

dustin0284 · 12-07-2016, 09:12 PM

Nothing. I turned the light on in the garage and looked at my Camaro for about 2 minutes. She looks nice. Nice to be paying a monthly payment on something that is just stored away in the garage. Haha

Gunmetal Speedster · 12-07-2016, 09:36 PM

Quote:

Originally Posted by Lil' Nasty

Looks Great!

I prefer the rocket ship tips

Thank you and same here!

12-04-2016, 09:48 PM	#18145
jshaf Montani Semper Liberi Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010 Location: Masontown, WV Posts: 4,841	washed and detailed the exterior, was in the 40's here. have done preliminary stuff like cleaning the interior, putting conditioner on the leather, putting protectant on the black plastic, stabil, etc. tendered and covered after. now wait 12-14 weeks :( __________________ Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint

12-05-2016, 07:36 PM	#18147
Al Jay Banned Drives: 2012 SSRSLS3 Join Date: Dec 2016 Location: Las Vegas Posts: 11 View My Garage	Brand new 295/35/20 Michelin Pilot Super Sports. Mounted and balanced by peps boys, than took them to Americas tire to get re-balanced again. 6 ounces off on both wheels. I knew something was up when the tech threw on 2 strips of wheel weights. Last edited by Al Jay; 12-05-2016 at 08:15 PM.

12-06-2016, 02:58 AM	#18150
Gunmetal Speedster Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016 Location: Middletown, Ohio Posts: 2,914 View My Garage	Officially have headers and off road connection pipes on the way been a long time coming! __________________ **SOLD504HP/433*TQ \| Night Fury cammed • Cold Air Inductions intake • Bo White ported TB • Speed Engineering 1 7/8 longtubes • NPP catback • QTP low profile cutouts • Powerbond 25% UDP • 3.73 gears • JRE scoop • ZL1 grille • R1 Concepts drilled/slotted rotors • built/tuned by Weapon X Motorsports Instagram \| YouTube \| Build Thread Last edited by Gunmetal Speedster; 12-07-2016 at 07:32 PM.*

12-06-2016, 06:52 AM	#18151
Woo O’Dark30 Drives: 2016 SS Black Panther Join Date: May 2016 Location: Atlanta Posts: 443 View My Garage	What Did You Do To Your Camaro Today? Forgive me Camaro nation....I took a flight to Tampa for some diagnostic test on my back and had to rent a vehicle to get me around town. Soooooo they had a white 2016 Camaro and a black 2016 "musty" stang for rental... I went with the stang to see what these "stangers" pump their chest about. I must say it handles pretty well and has smooth acceleration but I'd still choose my Chevy Camaro as a daily driver any day, hands down.... Sent from my iPhone using Tapatalk __________________ The Earth is what "God" created, the World is the state of living "man" causes us to be in. -Woo

12-06-2016, 01:40 PM	#18152
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	Went out to go to the store and found this sitting on my center console ... My granddaughter will be visiting soon, so my wife picked it up yesterday for her; guess she decided to start moving him around early : Attached Images __________________

12-05-2016, 04:54 PM	#18146
GMfan454 Drives: 2012 IOM 2SS/RS 6spd manual Join Date: Aug 2009 Location: Texas Posts: 401	Man, I started consulting work and haven't been able to mess with my car at all. I priced a full exhaust system with headers and a tune but haven't pull the trigger yet. Miss my car.

12-06-2016, 04:24 PM	#18153
InFiD3ViL Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016 Location: Spring Hill, FL Posts: 4,735	I didn't actually 'DO' anything to it, but I bought it a few presents today... TSP LT Headers, Granatelli 0 Ohm Wires, Stock Delco Plugs, Vitesse Paddle Shifters, and an OEM key fob so I can go back to the pre-recall style. __________________ 2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI

12-06-2016, 06:36 PM	#18154
Gunmetal Speedster Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016 Location: Middletown, Ohio Posts: 2,914 View My Garage	SS clones tips came in! 3in inlet to quad 4in outlet Attached Images __________________ **SOLD504HP/433**TQ \| Night Fury cammed • Cold Air Inductions intake • Bo White ported TB • Speed Engineering 1 7/8 longtubes • NPP catback • QTP low profile cutouts • Powerbond 25% UDP • 3.73 gears • JRE scoop • ZL1 grille • R1 Concepts drilled/slotted rotors • built/tuned by Weapon X Motorsports Instagram \| YouTube \| Build Thread

12-07-2016, 06:35 PM	#18155
Gunmetal Speedster Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016 Location: Middletown, Ohio Posts: 2,914 View My Garage	Got my SS clones installed today __________________ **SOLD504HP/433**TQ \| Night Fury cammed • Cold Air Inductions intake • Bo White ported TB • Speed Engineering 1 7/8 longtubes • NPP catback • QTP low profile cutouts • Powerbond 25% UDP • 3.73 gears • JRE scoop • ZL1 grille • R1 Concepts drilled/slotted rotors • built/tuned by Weapon X Motorsports Instagram \| YouTube \| Build Thread

12-07-2016, 09:12 PM	#18157
dustin0284 Drives: 2014 BRM 1LT Join Date: Nov 2016 Location: Kansas City, MO Posts: 166 View My Garage	Nothing. I turned the light on in the garage and looked at my Camaro for about 2 minutes. She looks nice. Nice to be paying a monthly payment on something that is just stored away in the garage. Haha __________________ 2014 Camaro 1LT / 2007 Silverado 1500 WT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM