Project clutch master cylinder/second gear grind - Page 13 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BigCarrot · 04-12-2012, 03:44 PM

Quote:

Originally Posted by stieger

piticu667 · 04-12-2012, 04:10 PM

Quote:

Originally Posted by MileMAN402

Well I've had it planned a while ago to go to the NYC auto show so it's not too far out of my way

True but Toronto is kinda like New York on a much smaller scale. So I really have no interest to go to NYC its just too crowded.

fad1 · 04-12-2012, 04:26 PM

Im so excited for this thread to see the results and I don't even have a Camaro. LOL

VEESIKS · 04-12-2012, 09:32 PM

Quote:

Originally Posted by IDEALG

where it connects to the master cylinder it will be the same. i used the same line to test the SS and the V6 cylinders using the factory clips and all. I dont know if its the same fitting on the trans though. i haven't had a V6 here in the shop yet.

Quote:

Originally Posted by piticu667

Guys looks like this weekend we will know if this will fix the v6 issue. Driving to Jersey to test the v6 IDEALG made.

Thanks IDEAL for the info I think I will give it a shot. My grind issue was fixed through GM, just wanting to make some upgrades.

piticu667 · 04-13-2012, 08:56 AM

Quote:

Originally Posted by 2011Camaro

Thanks IDEAL for the info I think I will give it a shot. My grind issue was fixed through GM, just wanting to make some upgrades.

How what did they do?

11SynergyGr&Bl · 04-13-2012, 11:51 AM

Quote:

Originally Posted by piticu667

How what did they do?

^^^^^^^^ please do tell.

Stealth6 · 04-13-2012, 01:55 PM

Quote:

Originally Posted by 2011Camaro

My grind issue was fixed through GM,.

I would like to know as well....How was it "fixed"?

VEESIKS · 04-13-2012, 02:24 PM

GM changed out their supplier for the blockers they are now carbon. Also with this trans change they changed the clutch assembly as well. There is a TSB out about pressure plate bolt torques for our cars and the CTS as well. Anyways not sure if it was the trans or the clutch but I'll take what I can get. If you'd like send me a PM and I can give you the contact info to my service manager who has been a great help through all this.

piticu667 · 04-13-2012, 02:42 PM

When did they do this for you? Last year they rebuilt my tranny but I doubt they installed carbon as far as the clutch assembly , they did nothing..

Badger · 04-13-2012, 02:59 PM

..What TSB???

I was told the other day by dealership that there is NO TSB out on this transmission...am I being lied to or what?

MileMAN402 · 04-13-2012, 04:19 PM

My new master is installed and I'll be picking my car up tomorrow! So within 24 hours we'll know if it worked.

piticu667 · 04-13-2012, 04:49 PM

Quote:

Originally Posted by Badger

..What TSB???

I was told the other day by dealership that there is NO TSB out on this transmission...am I being lied to or what?

GM will do anything to limit costs... I learned this the hard way..

piticu667 · 04-13-2012, 04:50 PM

Quote:

Originally Posted by MileMAN402

My new master is installed and I'll be picking my car up tomorrow! So within 24 hours we'll know if it worked.

Hopefully i'll see you there.. I will be leaving at 1 am..

VEESIKS · 04-13-2012, 06:52 PM

Quote:

Originally Posted by piticu667

When did they do this for you? Last year they rebuilt my tranny but I doubt they installed carbon as far as the clutch assembly , they did nothing..

February time frame is when I had the last transmission changed and they did they clutch as well. I had my trans rebuilt at ~10k miles, replaced the first time at ~16k miles and then replaced again the final time at ~22k miles. Havent had any issues with it since.

Quote:

Originally Posted by Badger

..What TSB???

I was told the other day by dealership that there is NO TSB out on this transmission...am I being lied to or what?

Not sure of the number but my service manager and I sat in his office and looked at them. It is regarding the torque of pressure plate bolts being at 22 lbs if I remember right it says if not torqued properly replace clutch assembly. Shoot me a PM and I'll give you my dealer's info if you want to give him a call.

View Poll Results: if you definitely want a cylinder please chose V6 or SS. need to figure out how many
I own a V6	20	20.83%
I own a V6 but will wait for a core exchange	7	7.29%
I own a SS	50	52.08%
I own a SS but will wait for a core exchange	21	21.88%
Multiple Choice Poll. Voters: 96. You may not vote on this poll

04-12-2012, 04:26 PM	#171
fad1 Drives: Future 5th gen Camaro Join Date: May 2008 Location: Los Angeles California Posts: 1,108	Im so excited for this thread to see the results and I don't even have a Camaro. LOL __________________ Plan: Buy a Summit White Camaro right after College.

04-13-2012, 02:24 PM	#176
VEESIKS formerly 2011Camaro Drives: 2011 Camaro LS IBM M6 Join Date: Jul 2010 Location: Fredericksburg, VA Posts: 816	GM changed out their supplier for the blockers they are now carbon. Also with this trans change they changed the clutch assembly as well. There is a TSB out about pressure plate bolt torques for our cars and the CTS as well. Anyways not sure if it was the trans or the clutch but I'll take what I can get. If you'd like send me a PM and I can give you the contact info to my service manager who has been a great help through all this. __________________ Born on the Island and raised in the sand. Semper Fidelis

04-13-2012, 02:59 PM	#178
Badger Drives: 2010 ABM SS #14 of 2,027 Join Date: Jan 2007 Location: New York Posts: 1,217	..What TSB??? I was told the other day by dealership that there is NO TSB out on this transmission...am I being lied to or what? __________________ "One of the ordinary modes, by which tyrants accomplish their purposes without resistance, is, by disarming the people, and making it an offense to keep arms." -- Constitutional scholar and Supreme Court Justice Joseph Story, 1840

04-13-2012, 04:19 PM	#179
MileMAN402 RIP JoePa Drives: 2010 2SS/RS & 2001 Audi S4 Join Date: Apr 2010 Location: Central PA Posts: 644 View My Garage	My new master is installed and I'll be picking my car up tomorrow! So within 24 hours we'll know if it worked. __________________

04-13-2012, 02:42 PM	#177
piticu667 Drives: 2010 Camaro Join Date: Jun 2010 Location: Ontario in the commie North Posts: 422	When did they do this for you? Last year they rebuilt my tranny but I doubt they installed carbon as far as the clutch assembly , they did nothing..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear End Gears 101	danhr	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	92	06-02-2021 04:17 AM
2nd gear grind issue and updated GM parts (pics)	Oxtar41	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	67	03-04-2015 10:11 PM
GTO Clutch Reservoir Install	terry_b	Camaro DIY & HOW-TO instructions & discussions	68	06-13-2014 07:46 PM
V6 AY6 M6 2nd Gear Problem - Report Your Issue Here	CAMAR0	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	1606	10-25-2012 03:18 PM
Street Slayer brought to you by Hendrix Engineering	Hendrix-Engineering	Transmission / Driveline	2	12-08-2011 02:55 PM