Rear end clicking noise 'Thrust Washer' TSB.... DIY video. - Page 13 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PQ · 08-11-2015, 02:03 PM

Quote:

Originally Posted by BearM

I have asked the dealer every time it's been there since new in early 2009 and they tell me it's "normal"! Well now I am well out of warranty so I will take my "normal" and fix it myself. LOL!

Damn. They should have seen the TSB on this. Stupid service.

BearM · 08-11-2015, 03:09 PM

Agreed, I have even been to more than 3 or 5 dealerships also

PQ · 08-11-2015, 03:49 PM

My dealership said no because I had already put my blower on.

Unbelievable.

BearM · 08-12-2015, 01:41 PM

Yea, that makes perfect sense... They forgot to put a part on your car from the factory so a blower is going to change that..... Makes perfect sense...

HeavyChevySSRS · 10-03-2015, 03:25 PM

Wow I'm glad a read through the entire thread. The last page and I find someone found the same thing as I did.
I have a 2010 build 123xxx with 20,000 kilometres and I also have the damn clicking noise. I got the washers and opened the rear up thanks to PQ diy vid, and saw that I already had the washer! So initial thought was "wtf is wrong with this thing now lol". I debated just putting the new beefed up washer over the stock one, but wasn't sure if it would interfere with a sensor or something. So now thanks to suicides work, I know what I have to do to fix my problem. Thanks guys

HeavyChevySSRS · 10-03-2015, 08:07 PM

Okay so, bad news.. Installed the washers and the noise is still there

So, now what can the issue be?

PQ · 11-05-2015, 01:28 AM

Quote:

Originally Posted by HeavyChevySSRS

Okay so, bad news.. Installed the washers and the noise is still there

So, now what can the issue be?

killercamaro23 · 07-18-2017, 05:14 PM

For some reason these part numbers for nuts and washers are not coming up anymore. I've done some research to see if I can find them but I'm not sure. Can anyone confirm that these are the right nuts and washers for the 2012 ss ? thank you!!!

Axle Nut 11611687

Axle Washer 11611965

PQ · 07-30-2017, 11:37 AM

Not sure. Hell I still have a washer and bolt that I never put on the other side. haahah

05SilverStreak · 08-15-2017, 06:15 PM

What size are they? I don't live near a dealer and NAPA can't do anything for me. No one seems to be able to cross reference a part # with the GM ones from the video.

DevilsReject97 · 10-09-2017, 01:55 PM

Quote:

Originally Posted by 05SilverStreak

What size are they? I don't live near a dealer and NAPA can't do anything for me. No one seems to be able to cross reference a part # with the GM ones from the video.

Did you ever get this resolved 05SilverStreak?

hammdo · 10-30-2017, 10:39 AM

http://www.camaro5.com/forums/showpo...&postcount=606

http://www.camaro5.com/forums/showpo...&postcount=629

http://www.camaro5.com/forums/showpo...&postcount=630

-Don

camarosspower · 11-05-2017, 08:26 PM

Im getting some clicking noise from my right side. Is this still possible with aftermarket axles? I can shake the axle a little bit while it is installed. So I took the axle nut off and pushed the axle as further in as I could into the diff. I tried shaking the axle again and it felt firmly in place. I installed the nut back in it and I can shake the axle again. Seems like the axle is coming out from the differential a bit after I tighten up the axle nut. Think these washers will fix my problem or is it the whole axle?

IkoIko · 11-05-2017, 08:45 PM

Quote:

Originally Posted by camarosspower

Im getting some clicking noise from my right side. Is this still possible with aftermarket axles? I can shake the axle a little bit while it is installed. So I took the axle nut off and pushed the axle as further in as I could into the diff. I tried shaking the axle again and it felt firmly in place. I installed the nut back in it and I can shake the axle again. Seems like the axle is coming out from the differential a bit after I tighten up the axle nut. Think these washers will fix my problem or is it the whole axle?

I can only comment on the stock rearend.
I heard a clicking sound and took my SS to a dealership that I trust. It turns out the bolts are a "one time use and one turn" bolt. So if you are re-installing those bolts, it is advised to purchase new bolts.

08-11-2015, 03:49 PM	#171
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,717 View My Garage	My dealership said no because I had already put my blower on. Unbelievable. __________________

10-03-2015, 03:25 PM	#173
HeavyChevySSRS Drives: 2010 SSRS Join Date: Apr 2015 Location: Winnipeg Posts: 75	Wow I'm glad a read through the entire thread. The last page and I find someone found the same thing as I did. I have a 2010 build 123xxx with 20,000 kilometres and I also have the damn clicking noise. I got the washers and opened the rear up thanks to PQ diy vid, and saw that I already had the washer! So initial thought was "wtf is wrong with this thing now lol". I debated just putting the new beefed up washer over the stock one, but wasn't sure if it would interfere with a sensor or something. So now thanks to suicides work, I know what I have to do to fix my problem. Thanks guys __________________ As I lay rubber down the street I pray for traction k can keep, but if I spin and begin to slide please dear god, protect my ride[/I] 10' ls3 2SS/RS, gfx pkg, stainless headers, 3" stainless exhaust, rotofab cai, custom stage 3 cam, 4:11 gears, wall tuned

10-03-2015, 08:07 PM	#174
HeavyChevySSRS Drives: 2010 SSRS Join Date: Apr 2015 Location: Winnipeg Posts: 75	Okay so, bad news.. Installed the washers and the noise is still there So, now what can the issue be? __________________ As I lay rubber down the street I pray for traction k can keep, but if I spin and begin to slide please dear god, protect my ride[/I] 10' ls3 2SS/RS, gfx pkg, stainless headers, 3" stainless exhaust, rotofab cai, custom stage 3 cam, 4:11 gears, wall tuned

07-30-2017, 11:37 AM	#177
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,717 View My Garage	Not sure. Hell I still have a washer and bolt that I never put on the other side. haahah __________________

08-15-2017, 06:15 PM	#178
05SilverStreak Drives: Black aSS 2011 - L99 Join Date: Apr 2012 Location: Texas Posts: 330	What size are they? I don't live near a dealer and NAPA can't do anything for me. No one seems to be able to cross reference a part # with the GM ones from the video. __________________ Staying stock and loving it............

08-11-2015, 03:09 PM	#170
BearM Drives: 2010 Camaro 2SS Inferno Orange Join Date: Sep 2013 Location: Lombard, IL Posts: 3 View My Garage	Agreed, I have even been to more than 3 or 5 dealerships also

08-12-2015, 01:41 PM	#172
BearM Drives: 2010 Camaro 2SS Inferno Orange Join Date: Sep 2013 Location: Lombard, IL Posts: 3 View My Garage	Yea, that makes perfect sense... They forgot to put a part on your car from the factory so a blower is going to change that..... Makes perfect sense...

07-18-2017, 05:14 PM	#176
killercamaro23 Drives: 2012 camaro 2LS Join Date: Nov 2016 Location: Florida Posts: 101	For some reason these part numbers for nuts and washers are not coming up anymore. I've done some research to see if I can find them but I'm not sure. Can anyone confirm that these are the right nuts and washers for the 2012 ss ? thank you!!! Axle Nut 11611687 Axle Washer 11611965

10-30-2017, 10:39 AM	#180
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	http://www.camaro5.com/forums/showpo...&postcount=606 http://www.camaro5.com/forums/showpo...&postcount=629 http://www.camaro5.com/forums/showpo...&postcount=630 -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

11-05-2017, 08:26 PM	#181
camarosspower Drives: 2010 camaro ss Join Date: Jun 2010 Location: Port Arthur, Tx Posts: 2,383	Im getting some clicking noise from my right side. Is this still possible with aftermarket axles? I can shake the axle a little bit while it is installed. So I took the axle nut off and pushed the axle as further in as I could into the diff. I tried shaking the axle again and it felt firmly in place. I installed the nut back in it and I can shake the axle again. Seems like the axle is coming out from the differential a bit after I tighten up the axle nut. Think these washers will fix my problem or is it the whole axle?