What Did You Do To Your Camaro Today? - Page 1426 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Sinister_Camaro · 07-27-2017, 06:52 PM

Quote:

Originally Posted by fussboss

Looks great!! Is that the official one for the 6th gens? How was install?

And yes it's OEM!

Spocktwin · 07-27-2017, 07:03 PM

footwell lighting...love the look

Angrybird 12 · 07-27-2017, 07:16 PM

Quote:

Originally Posted by Low Saturn

Pretty nice. How is it held in place?

Two screws from the back of the trim piece. I had a spare trim piece in case I wanted to go back to stock ordered but FedEx delivered it to the wrong place and now they can't locate it.. sounds fishy to me.
Here is my final version.

Angrybird 12 · 07-27-2017, 07:27 PM

Quote:

Originally Posted by CamaroFred

Maybe you were driving extra hard.

You know the car keeps track of your MPGs? When that warning comes on you have 30 miles / 30 minutes to theoretical empty. But then the screen that is supposed to show you how many miles disappears and is replaced with the warning.

Do you know that gas stations are required to have an attendent on duty that will pump fuel into your car if you are handicapped? They must have a pump with the phone number in large print.
Most stations step it up and there is a phone number on every pump, though often not in such large print.

Hmm ok....

DrLove38 · 07-27-2017, 08:10 PM

I ordered some DRL LED replacements from Diode Dynamics. I couldn't stand that old 60w incandescent bulb look any longer.

Whoomba · 07-27-2017, 09:19 PM

Quote:

Originally Posted by Sinister_Camaro

GLOWTIE!

That's cool. Where?

CamaroFred · 07-27-2017, 09:34 PM

Quote:

Originally Posted by Angrybird 12

Hmm ok....

I didn't mean to offend.

I thought as a fellow cancer survivor, if you didn't already know, it might help you when you find it difficult to get out of the car.

Some days are better than others, but on the bad days it never hurts to have some help.

Angrybird 12 · 07-27-2017, 10:51 PM

Quote:

Originally Posted by CamaroFred

I didn't mean to offend.

I thought as a fellow cancer survivor, if you didn't already know, it might help you when you find it difficult to get out of the car.

Some days are better than others, but on the bad days it never hurts to have some help.

Been almost 6 years for me I am doing fine, hope you are too.

blewbyyou · 07-28-2017, 03:14 PM

Long story short. I went to get my windows retinted as they were not dark enough for me and the installer scratched it. Bad enough to be repainted but i didn't want to go that route as nothing is going to match factory paint exactly. So i agreed to have some stripes added to help cover the scratches up. And to have my Avalanche retinted for the aggravation as it was 10 years old tint. Ill post pics asap let me know what you think.

naikaidriver · 07-28-2017, 03:47 PM

Took mine to the track and ran the snot out of it around a gorgeous road course!

Scott

BlazeNGlory · 07-28-2017, 06:22 PM

Installed BMR front end links
[IMG]

Installed by Craig Yamachika, on Flickr[/IMG]

Silent... · 07-28-2017, 06:32 PM

Put on my new MRR M017 wheels 20X10 square and Nitto NT555 G2 from PK Design.

BlazeNGlory · 07-28-2017, 06:42 PM

Quote:

Originally Posted by Silent...

Put on my new MRR M017 wheels 20X10 square and Nitto NT555 G2 from PK Design.

Nice! Well Done!

blewbyyou · 07-29-2017, 11:36 AM

QUOTE=blewbyyou;9840044]Long story short. I went to get my windows retinted as they were not dark enough for me and the installer scratched it. Bad enough to be repainted but i didn't want to go that route as nothing is going to match factory paint exactly. So i agreed to have some stripes added to help cover the scratches up. And to have my Avalanche retinted for the aggravation as it was 10 years old tint. Ill post pics asap let me know what you think.[/QUOTE]

07-28-2017, 03:47 PM	#19960
naikaidriver Drives: 2010 Camaro 2SS/RS Join Date: Oct 2014 Location: Redmond, WA Posts: 239	Took mine to the track and ran the snot out of it around a gorgeous road course! Scott Attached Images __________________ "The Beast" 2010 Camaro SS/RS LS3 Diablo T1000 with Phastek custom tune, K&N Intake, Hurst Short-Throw Shifter, Flowmaster, Outlaw II Exhaust, BMR 1" Lowering Springs, BMR 3-way Adjustable Anti-Roll Bars, BMR End Links and Reinforcement Brackets, BMR Trailing Arms, ZL1 wheels, Nitto NT555 G2 Tires, Z28-style Rear Spoiler, Hawk Plus Brake Pads, Motul RBF600 Brake Fluid

07-28-2017, 06:22 PM	#19961
BlazeNGlory Drives: 2011 Camaro 1LT Join Date: Jan 2015 Location: So Cal Posts: 216 View My Garage	Installed BMR front end links [IMG]Installed by Craig Yamachika, on Flickr[/IMG] __________________ Hotchkis Lowering Springs, Pfadt Balance Rear Sway Bar, BMR End Links, Cadillac ATS Front Brembo 4-Piston Brakes, VMAX Ported Throttle Body, VMAX Ice-olator, Volant Cold Air Intake, Magnaflow Resonated X-Pipe, Magnaflow Axle-Back Exhaust, JEGS Exhaust Cutouts, GM Strut Tower Brace, Hurst Comp Shifter, Heritage Front Grill, 3D Carbon Front Air Dam, T-Rex Lower Billet Grill, 3D Carbon Front Vendor Vents, 20x9 OEM Polished RS/SS Wheels Front & Rear

07-28-2017, 06:32 PM	#19962
Silent... Drives: 2012 2LT RS White Born: 11/10/11 Join Date: Nov 2011 Location: Florida Posts: 313	Put on my new MRR M017 wheels 20X10 square and Nitto NT555 G2 from PK Design. Attached Images __________________ Grey Hockey Stripes; Heritage Grill; GM GFX - Unpainted Argent Gray; GM Dovetail Spoiler; Rivercity Creations custom painted rear bowtie, RS & Taillight Bezels; MRR M017 Graphite Wheels; Nitto NT555 G2; ACS 4Teen Heat Extractor RX Catch Can;CAI; MF Exhaust; VMAX CNC Spiral Ported TB; Overkill Stage 1 Supercharger System; Hotchkis Comp Sway Bar Set w/ End Links, Cadillac CTSV 4 Piston Brembos on all corners with SS Black Hat Rotors Youtube Channel - HPDE Driving Videos https://www.youtube.com/channel/UCpO...8aw6hgX3O1Uh7A

07-29-2017, 11:36 AM	#19964
blewbyyou Drives: Dusk SE Join Date: Jun 2014 Location: Apopka Fl. Posts: 454	QUOTE=blewbyyou;9840044]Long story short. I went to get my windows retinted as they were not dark enough for me and the installer scratched it. Bad enough to be repainted but i didn't want to go that route as nothing is going to match factory paint exactly. So i agreed to have some stripes added to help cover the scratches up. And to have my Avalanche retinted for the aggravation as it was 10 years old tint. Ill post pics asap let me know what you think.[/QUOTE] Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM

07-27-2017, 07:03 PM	#19952
Spocktwin Drives: 2015 LT RS Camaro, 1978 Trans Am Join Date: Jan 2017 Location: Wadsworth, Ohio Posts: 125	footwell lighting...love the look

07-27-2017, 08:10 PM	#19955
DrLove38 Drives: 2013 Black SS/RS Join Date: May 2017 Location: West Texas Posts: 133	I ordered some DRL LED replacements from Diode Dynamics. I couldn't stand that old 60w incandescent bulb look any longer.

07-28-2017, 03:14 PM	#19959
blewbyyou Drives: Dusk SE Join Date: Jun 2014 Location: Apopka Fl. Posts: 454	Long story short. I went to get my windows retinted as they were not dark enough for me and the installer scratched it. Bad enough to be repainted but i didn't want to go that route as nothing is going to match factory paint exactly. So i agreed to have some stripes added to help cover the scratches up. And to have my Avalanche retinted for the aggravation as it was 10 years old tint. Ill post pics asap let me know what you think.