JP Superior Solutions New Product - Page 15 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Firefighter · 03-05-2015, 09:10 AM

Quote:

Originally Posted by Nor Cal ZL1

You need these damn things. Drop springs, coilovers etc do not address the issues that these things keep in check. This should be the first mod and everything else built from there.

I know man. I can only justify so much in race car parts on my ride that is primarily a street car.

I'm hoping he can get it done under my breaking point dollar wise.

I'm not throwing the number out there until after Pete does though... lol

Sent from my SM-G900V using Tapatalk

Rob@WretchedMS · 03-05-2015, 10:47 AM

well, if we know anything, we know this.
it will be sooon

Firefighter · 03-05-2015, 10:55 AM

Quote:

Originally Posted by Rob@WretchedMS

well, if we know anything, we know this.
it will be sooon

LMAO...

Sent from my SM-G900V using Tapatalk

Camaro_Custom_Painted · 03-05-2015, 10:58 AM

This is EXACTLY what I have been waiting for. I hope it fits in my car hobby budget!

JusticePete · 03-05-2015, 12:22 PM

I am sure these would cover a set or two...

Camaro_Custom_Painted · 03-05-2015, 12:38 PM

Market price of gold as of March 4, 2015 is $1,196 per ounce. Your message 'cover a set or two', showing two one ounce bars? So one bar, value $1,196, is one 'set' where a set is four units (one for each wheel). That's fair.

JusticePete · 03-05-2015, 12:52 PM

My bad, I should have used this picture.

Camaro_Custom_Painted · 03-05-2015, 12:58 PM

Happy Hopeful Excited Bubble = Burst

Burt · 03-05-2015, 01:57 PM

I was looking around online, and found a pair of billet tail light housings for a 1st Gen Camaro. Two pretty simple pieces of billet, using a lot less material than a knuckle, and with no design change considerations, or structural integrity requirements. They're more than $500 for a pair. Considering all the changes Pete's making, the strength required, the difficulty in machining, and the amount of billet/number of knuckles, they won't be cheap. Will they be awesome, and worth the asking price? Absolutely, but the price will be set accordingly for custom billet structural components.

JusticePete · 03-05-2015, 02:07 PM

Quote:

Originally Posted by Burt

I was looking around online, and found a pair of billet tail light housings for a 1st Gen Camaro. Two pretty simple pieces of billet, using a lot less material than a knuckle, and with no design change considerations, or structural integrity requirements. They're more than $500 for a pair. Considering all the changes Pete's making, the strength required, the difficulty in machining, and the amount of billet/number of knuckles, they won't be cheap. Will they be awesome, and worth the asking price? Absolutely, but the price will be set accordingly for custom billet structural components.

Firefighter · 03-05-2015, 02:15 PM

Burt... seriously... wtf... don't give Pete any ideas... lol

Sent from my SM-G900V using Tapatalk

JusticePete · 03-05-2015, 02:17 PM

Quote:

Originally Posted by Firefighter

Burt... seriously... wtf... don't give Pete any ideas... lol

Sent from my SM-G900V using Tapatalk

Too late...

Firefighter · 03-05-2015, 02:19 PM

You're killing me Pete...

Sent from my SM-G900V using Tapatalk

JusticePete · 03-05-2015, 02:34 PM

Only a mild form of torture because dead people don't buy Knuckle Drops.

03-05-2015, 10:58 AM	#200
Camaro_Custom_Painted Choke on that causality! Drives: 2010 2SS/RS Join Date: Sep 2009 Location: Minnesota Posts: 645	This is EXACTLY what I have been waiting for. I hope it fits in my car hobby budget! __________________ Edelbrock EForce - Stainless Works Headers - BMR Sways & Arms & Toe Links & Control Arm Bushings & End Links - Rotofab CAI - Assorted Interior, Exterior, Underhood Bling - Red Jewel Stripes & Full Body Clear - Lexani LX15 Wheels - JRE Fuel Rail Upgrade - Kenne Bell BAP - Heartthrob XPipe - Elite Catch Can - Pedders Cradle & Front Arm Bushings - Hotchkis Strut Brace - MSD Wires - Carbotech Brakes - DSS 1000HP Axles & Driveshaft - Mickey Thompson Tires - Halo Harness - AutoMeter A/F, Boost, Fuel Pressure Gauges - Whats Next?

03-05-2015, 12:38 PM	#202
Camaro_Custom_Painted Choke on that causality! Drives: 2010 2SS/RS Join Date: Sep 2009 Location: Minnesota Posts: 645	Market price of gold as of March 4, 2015 is $1,196 per ounce. Your message 'cover a set or two', showing two one ounce bars? So one bar, value $1,196, is one 'set' where a set is four units (one for each wheel). That's fair. __________________ Edelbrock EForce - Stainless Works Headers - BMR Sways & Arms & Toe Links & Control Arm Bushings & End Links - Rotofab CAI - Assorted Interior, Exterior, Underhood Bling - Red Jewel Stripes & Full Body Clear - Lexani LX15 Wheels - JRE Fuel Rail Upgrade - Kenne Bell BAP - Heartthrob XPipe - Elite Catch Can - Pedders Cradle & Front Arm Bushings - Hotchkis Strut Brace - MSD Wires - Carbotech Brakes - DSS 1000HP Axles & Driveshaft - Mickey Thompson Tires - Halo Harness - AutoMeter A/F, Boost, Fuel Pressure Gauges - Whats Next?

03-05-2015, 12:58 PM	#204
Camaro_Custom_Painted Choke on that causality! Drives: 2010 2SS/RS Join Date: Sep 2009 Location: Minnesota Posts: 645	Happy Hopeful Excited Bubble = Burst __________________ Edelbrock EForce - Stainless Works Headers - BMR Sways & Arms & Toe Links & Control Arm Bushings & End Links - Rotofab CAI - Assorted Interior, Exterior, Underhood Bling - Red Jewel Stripes & Full Body Clear - Lexani LX15 Wheels - JRE Fuel Rail Upgrade - Kenne Bell BAP - Heartthrob XPipe - Elite Catch Can - Pedders Cradle & Front Arm Bushings - Hotchkis Strut Brace - MSD Wires - Carbotech Brakes - DSS 1000HP Axles & Driveshaft - Mickey Thompson Tires - Halo Harness - AutoMeter A/F, Boost, Fuel Pressure Gauges - Whats Next?

03-05-2015, 01:57 PM	#205
Burt Cone Killer Drives: 2012 SS Join Date: Dec 2013 Location: St. Albans, West Virginia Posts: 832	I was looking around online, and found a pair of billet tail light housings for a 1st Gen Camaro. Two pretty simple pieces of billet, using a lot less material than a knuckle, and with no design change considerations, or structural integrity requirements. They're more than $500 for a pair. Considering all the changes Pete's making, the strength required, the difficulty in machining, and the amount of billet/number of knuckles, they won't be cheap. Will they be awesome, and worth the asking price? Absolutely, but the price will be set accordingly for custom billet structural components. __________________ 2012 Camaro SS - Sold Selling off my remaining wheels, tires, 27mm front sway bar, and MGW shift knob. Get them out of my house before my wife puts me out!

03-05-2015, 02:15 PM	#207
Firefighter Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012 Location: Tampa by way of Miami... Posts: 4,934	Burt... seriously... wtf... don't give Pete any ideas... lol Sent from my SM-G900V using Tapatalk __________________ My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054

03-05-2015, 10:47 AM	#198
Rob@WretchedMS Drives: His Wife Crazy Join Date: Jan 2008 Location: Silas Deane Auto,CT Name: Rob Anderson Posts: 1,789	well, if we know anything, we know this. it will be sooon

03-05-2015, 12:22 PM	#201
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	I am sure these would cover a set or two...

03-05-2015, 12:52 PM	#203
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	My bad, I should have used this picture.

03-05-2015, 02:19 PM	#209
Firefighter Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012 Location: Tampa by way of Miami... Posts: 4,934	You're killing me Pete... Sent from my SM-G900V using Tapatalk __________________ My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054

03-05-2015, 02:34 PM	#210
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	Only a mild form of torture because dead people don't buy Knuckle Drops.